2012 St Crew 4x4 Longbed Uconnect Voice Command Bluetooth Cummins Diesel on 2040-cars

Auto blog

Ram 1500 TRX too tame for you? Hennessey cranks its Hemi V8 to 1,012 horsepower

Ram captured the top spot on the horsepower podium when it released the Hellcat-powered 1500 TRX in 2020. The truck's 702-horsepower output places it comfortably ahead of the Ford F-150 Raptor, at least for now, but American tuner Hennessey saw plenty of room for improvement. It added over 300 horses to the TRX's cavalry. Hennessey is a master in V8-ology, so it was only a matter of time before it injected more power into the TRX. It announced two models named Mammoth 900 and Mammoth 1000, respectively, and each number vaguely corresponds to the V8's new output. The 900's 6.2-liter produces 912 horsepower and 873 pound-feet of torque, increases of 210 and 223, respectively, compared to the standard TRX. Hennessey achieved these figures by upgrading the supercharger pulleys and making relatively basic changes to the intake and exhaust systems. Stepping up to the 1000 unlocks 1,012 horsepower and 969 pound-feet of torque, numbers that give the 6,300-plus-pound truck the uncanny ability to reach 60 mph from a stop in 3.2 seconds. It flies through the quarter mile in 11.4 seconds at 120 mph. Building a pickup with supercar-like acceleration required installing a bigger, 2.65-liter supercharger, adding high-flow fuel injectors, and recalibrating the ECU. Intake and exhaust modifications are on the menu, too. Surprisingly, it doesn't sound like Hennessey made significant internal changes to the engine or to the transmission, which suggests the standard components can handle a massive amount of power. Context is useful here. Released in 2013, the fifth and final generation of the Dodge-turned-SRT-turned-Dodge again Viper took 3.3 seconds to sprint from zero to 60 mph, and it logged an 11.5-second quarter-mile time. Previewed in a computer-generated sketch, the Mammoth 1000 (shown above) also receives 20-inch wheels wrapped by 35-inch off-road tires, a 2.5-inch suspension lift, custom bumpers on both ends, extra LEDs up front, electronic fold-out steps, plus an array of model-specific emblems. Inside, Hennessey added a numbered plaque. 200 units of the Mammoth 1000 will be available for the 2021 model year, and pricing starts at $135,350 including the cost of the donor truck (which carries a base price of $71,790) and a warranty valid for two years or 24,000 miles. Put another way, you get 30.6% more power than stock for about 40% more money.

UPDATE: 8 Ram 1500s stolen, 2 recovered in Warren factory heist

UPDATE: Police and FCA report that the correct number of stolen Ram trucks was eight. Two of them were later recovered — a red truck that apparently ran out of gas, and a white truck that was discovered behind an abandoned building in Detroit. Neither of those trucks showed damage from breaking through the factory gate. Police are now investigating the raid as a possible inside job by current or former employees. "We do believe there was a good possibility that there was inside information given to the persons responsible for the thefts," Warren Police Commissioner Bill Dwyer told the Detroit Free Press. "That would include possibly a former or current employee. Obviously they knew where they were going, what they were looking for, what area to cut the fence and get into the lot where vehicles were parked. This was not a random, all-of-a-sudden thought or idea. It was well-planned for probably several weeks." Previous story appears below: Thursday morning, a group of thieves broke into the grounds of Fiat-Chrysler's truck assembly plant in Warren, Mich., where the Ram 1500 is built, and stole roughly 10 brand-new trucks, according to the Detroit Free Press. The newspaper reports that the thieves drove to up a fence in a pickup truck and cut through to get on the property. They then gathered up trucks and drove right out through the main gates. With a starting price of just over $33,000 for a base Ram 1500, the thieves got away with at least $300,000 worth of trucks. The trucks have yet to be found, and it might still be a while. Warren Police Department Commissioner Bill Dwyer told Detroit Free Press that they haven't received any tips on the vehicles. "We have absolutely nothing," said Dwyer. "Why aren't they calling me? We can't do an investigation if they're not working with us." They're still waiting on FCA to give them a list of the trucks' VINs and colors, as well as an exact number instead of the current estimate of 9 to 11. It's not clear if the keys were in the trucks, but an FCA spokesperson told the Free Press, "The company will be assessing security measures at the location and implementing any necessary changes to prevent future incidents." Dwyer said that the heist "was well-planned," and that the vehicles have probably been taken to a pre-arranged location such as a warehouse. It was likely part of an order for stolen trucks, but it's not clear if a crime ring or syndicate is involved.

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.