2011 Brown 5.7l V8 Automatic Satellite Radio Navigation Leather Heated Seats on 2040-cars

Auto blog

FCA recalls 2019-20 Ram 2500 and 3500 trucks for transmission fluid leak

Once transmission fluid goes into the transmission, there's a general expectation that it will stay inside. On some 2019-2020 Ram 2500 and 3500 trucks, that ain't happenin'. Fiat Chrysler Automobiles (FCA) and the National Highway Traffic Safety Administration (NHTSA) opened a recall campaign on January 24,  due to transmission fluid leaking from the dipstick tube on vehicles with a six-speed automatic (codenamed 68RFE) transmission.  NHTSA recall No. 20V043000 states that 84,978 trucks are potentially affected. On select Ram work trucks, "a buildup of pressure and heat inside the transmission may result in a transmission fluid leak." Due to the location of where the leak might occur, the transmission fluid could drip onto the nearby turbocharger or "another ignition source within the engine compartment." Should this occur, it's a fire risk. The recall breaks down to 64,590 units of the 2500 pickup and 19,612 of the 3500. FCA estimates that only 1% of the roughly 85,000 vehicles have the defect.  As a fix, Chrylser will replace the transmission valve body separator plate and reprogram the powertrain control module. Chrysler will officially begin the recall process on March 14, and all owners will be notified. Related Video:    

2019 Ram 1500 eTorque Drivers' Notes Review | Filling in the gaps

When the 2019 Ram 1500 debuted earlier this year at the 2018 Detroit Auto Show, the biggest news was arguably the addition of the 48-volt mild hybrid system. Dubbed eTorque, the system is standard on V6-equipped models and a $1,450 option on trucks with the 5.7-liter Hemi V8. It's not a hybrid in the traditional sense. Despite Ram's claim that the system adds up to 130 pound-feet of torque on the V8, it only does so for a fraction of a second and doesn't actually change the engine's total output. You'd be hard pressed to notice a difference if you didn't know the system was there. But that's kind of the point. There's been a lot of confusion about what eTorque is and how the system works. Much of that falls on FCA's shoulders. The automaker didn't do a great job of explaining the whole thing, leaving us to work out much of it for ourselves. This isn't meant to boost performance, towing or payload. The Ram eTorque can't run on battery power, so don't expect a Toyota Prius with a bed and wood trim. It's here to make the truck just a little bit more efficient by improving areas where conventional internal-combustion engine's fall short. The eTorque system replaces the engine's alternator with a small, belt-driven electric motor. On the V6, the motor is part of the water pump assembly and driven by that belt; the V8 uses a dedicated belt that's separate from the other accessories. A small battery pack is mounted upright behind the rear seats inside the truck's cabin. There's also a DC-to-DC converter to charge the battery and convert 48 volts down to 12 to power the truck's normal systems. Visually, the only difference between an eTorque-equipped model and a standard one is a small metal box at the top of the engine. There's no badging and the battery pack can't be seen, even with the rear seats folded up. The system is designed to be as seamless and innocuous as possible. The auto start/stop system spins up the engine a little quicker. Shifts from the eight-speed ZF automatic transmission are a little smoother as the eTorque system smooths out and fills in the gaps. It does so for a fraction of a second, but it works its magic often. Big gains in fuel economy have already been made. It's going to take things like Ram's eTorque system to improve internal combustion engines from here on out. Editor-in-Chief Greg Migliore: I'd like to say I noticed a huge difference between the Ram eTorque and the regular Ram, but I didn't. That's how it's supposed to work.

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights