New 2013 Dodge Ram 1500 Big Horn Slt Quad Cab Chrome Luxury W/ Free Ship on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

FCA recalling 425,000 Ram 1500, Jeep Compass to fix windshield wipers

Fiat Chrysler is recalling an estimated 425,588 Jeep Compass SUVs and Ram 1500 pickups to fix windshield wipers that may not be adequately secured. The voluntary recall involves Jeep Compass models and Ram 1500 and Ram 1500 Classics from the 2019 and 2020 model years built before March 3 of this year. FCA says it knows of no related injuries or accidents related to the issue, which involves a fastener that is supposed to connect windshield-wiper arms not being secured sufficiently. The new wiper nut was first introduced into production at a Detroit-area plant that builds the Ram 1500 on April 28, 2019. Left unaddressed, it could affect a driver’s visibility and increase the risk of a crash. One owner of a 2019 Compass in Wichita, Kan., filed a complaint with the National Highway Traffic Safety Administration in June 2019 and said the windshield wiper came off during a storm the day the vehicle was purchased. FCA says it will begin contacting affected customers later this month to arrange a free repair. Customers can also contact their dealer if their wipers donÂ’t sufficiently clear their windshield, or if the wiper arms get stuck and donÂ’t return to the rest position when de-activated. Customers can also contact customer service at 1-800-853-1403. The recall also affects an estimated 76,280 vehicles in Canada and 3,280 in Mexico. Recalls Jeep RAM Truck SUV

2021 Ram 1500 TRX debuts as a Hellcat-powered, desert-running Raptor killer

The 2021 Ram 1500 TRX is here, and Ford’s free ride is over with the F-150 Raptor. Ford has had it good for a long time without any significant competition. Neither GM nor FCA entered the off-road full-size truck market with an offering like the Raptor. Chevy makes the Colorado ZR2, but itÂ’s a midsize truck. With the introduction of the Ram TRX, Ford finally has a proper competitor. Timing of the Ram TRXÂ’s release happens to fall in an in-between time for the Raptor, too. The F-150 is all new for 2021, but Ford hasnÂ’t released any details on the Raptor variant — though, weÂ’ve heard that the wait wonÂ’t be long. Regardless, Ford had better be aiming for the moon if it aims to best the TRX, because RamÂ’s new off-road truck is one hell of a moonshot. There is a lot to take in here, so weÂ’ve divided the chunks of information into a few digestible sections. LetÂ’s start with the underneath bits, which are arguably the most important of all when desert running and jumping is taken into consideration. Ram TRX frame and suspension Ram boasts that the frame underneath the TRX is 75 percent different from a regular Ram 1500. It uses thicker high-strength steel with low torsion attributes for stability and durability. The side rails are fully boxed, and sections of the frame are hydroformed. Ram claims its truck holds up to jumping and high impact events better than the competition, which in this case is simply code for the outgoing Raptor. ItÂ’s designed to handle rough terrain at 100 mph-plus. Compared to a Ram 1500 with the 5.7-liter V8, itÂ’s 600 pounds heavier. Ram is not messing around here. Damping is taken care of by Bilstein Black Hawk e2 adaptive shocks, aided by nitrogen-charged remote reservoirs to ensure maximum durability. The shocks will continuously adjust damping force to best handle the terrain, but you can control them via a number of modes, too. Ram says that in addition to the off-road capability, the shocks make for a smoother ride on pavement. The internals of the shocks feature a “Jounce Cut Off” that has three zones for progressive bottom-out control. You know, for when you take that jump at speed on your way to the office. 2021 Ram 1500 TRX chassis with brakes View 7 Photos Just like the other Ram 1500s, this one uses a five-link coil suspension design for the rear. However, the design is unique to the TRX with different hard points to allow room for a Dana 60 rear axle.