Crew Cab 4x4 39,563 Miles on 2040-cars

Auto blog

Ram issues recall on heavy-duty pickup transfer cases

UPDATE: A previous version of this story said the issue only occurred in four-wheel drive. This is incorrect – issues are only exhibited in two-wheel drive. The Basics: Ram is recalling 930 3500, 4500, and 5500 heavy-duty pickups from model year 2016. The affected 3500s were built between July 24, 2015 and January 7, 2016, while the larger 4500/5500 trucks were screwed together between July 24, 2015 and October 8, 2015. The Problem: According to the official NHTSA bulletin, the "transfer case may have been manufactured with a misshapen main output shaft, creating voids that may cause a shaft fracture." If this happens, the vehicle could lose power. The driver might not be able to select park, either. Injuries/Deaths: FCA isn't aware of any injuries or deaths related to the issue. The Fix: Dealerships will replace the transfer case on affected trucks. If you own one: You probably don't. According to FCA spokesman Eric Mayne, dealers haven't delivered the majority of the affected trucks to customers. But if you really do own one, Mayne added that the issue only occurs in two-wheel drive. We'd advise keeping it in four-wheel drive until you can report to your local dealer. FCA kicked the recall off on August 10, so expect a mailed notification soon. Related Video:

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

Chrysler teases upcoming outlay of SEMA cars

Fiat Chrysler Automobiles is hauling a multitude of modified models to the annual SEMA show in Las Vegas this November, and the company is releasing the first teasing sketches of many of them.
Unfortunately, FCA isn't giving many solid details on any of the concepts other than saying the vehicles from Chrysler, Jeep, Dodge, Ram and Fiat all benefit from tuning from its Mopar performance brand. The teaser photos include a sinister-looking Chrysler 200S, Fiat 500 Abarth with two-tone paint and a scorpion on the hood, a red and black 500L, seemingly two different takes on the Jeep Renegade, a green Dodge Challenger wearing the T/A badge, an orange and black Dart, a very neon Charger, just the outline of a red and black Viper, a Ram ProMaster in Mopar livery and a Ram pickup called the Outdoorsman.
Take a look through the gallery to see what you think of the sketches for these concepts, and scroll down for the full announcement from FCA.