2024 Ram 1500 Trx on 2040-cars

Auto blog

Ram 2500/3500 Heavy Duty trucks rustle up more luxury with Rodeo Edition

Now there's an even more luxurious version of Ram's Heavy Duty 2500/3500 pickup called the Ram Rodeo Edition. This takes the already highly-appointed Laramie Longhorn heavy duty work truck and gives it even more features for the 2018 model year. On the outside you get body-colored bumpers and side-steps. For single-rear-wheel trucks you'll get 20-inch aluminum wheels, and dual-rear-wheel trucks will have 17-inch polished aluminum rims. The Longhorn name will stretch across the tailgate in a more subdued fashion than we thought it would have. A suede headliner is the main change over the base Longhorn on the inside. Functionality is where the your money really goes for the Ram Rodeo, because it'll come with the gooseneck trailer prep package and bed-view camera. In addition to that you'll get a rear air suspension to aid in load-leveling when hauling payload or a trailer. A set of skid plates and the Mopar bed step round out the Ram Rodeo Edition changes. You'll be able to get the Ram Rodeo with the crew cab or mega cab configurations. Both the 6.4-liter V8 and the 6.7-liter Cummins I6 diesel are fair game as well. A base 2500 Longhorn will run you $56,440 including destination, but the Ram Rodeo Edition starts at $62,485. The 3500 bumps that up to $72,955. Luxury trucks are not cheap. Ram says the Ram Rodeo Edition will be available in the third quarter of 2018, so essentially, they've arrived. Featured video:

Ram recalling over 43k Promaster and C/V Tradesman vans for separate issues

Ram has announced that it will be recalling over 43,000 vehicles as part of a pair of campaigns targeting its two main cargo haulers, the ProMaster and C/V Tradesman.
In the case of its newer offering, the 2014 ProMaster, 21,470 vehicles are being recalled so that Ram dealers can replace the head restraints. The current restraints apparently leave too large of a gap between it and the occupant's head. Of the over 21,000 vans being recalled, nearly 19,000 are in the United States while the remaining 2,500 are in the barren tundra we call Canada.
For the old C/V Tradesman, meanwhile, its recall has been prompted by an investigation into the side-curtain and thorax airbag sensors. It was found that on vehicles lacking rear climate and audio systems in the back, a gap where these components should be could "generate a resonance" that could affect the sensors' operations. 22,115 vehicles are affected, covering model years 2013 through 2015. As with the ProMaster, the vast majority of vehicles are found in the United States, while just under 4,000 are in Canada.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric