2023 Ram 1500 Lone Star Crew Cab 4x4 5'7" Box on 2040-cars

Auto blog

Ram 1500 TRX too tame for you? Hennessey cranks its Hemi V8 to 1,012 horsepower

Ram captured the top spot on the horsepower podium when it released the Hellcat-powered 1500 TRX in 2020. The truck's 702-horsepower output places it comfortably ahead of the Ford F-150 Raptor, at least for now, but American tuner Hennessey saw plenty of room for improvement. It added over 300 horses to the TRX's cavalry. Hennessey is a master in V8-ology, so it was only a matter of time before it injected more power into the TRX. It announced two models named Mammoth 900 and Mammoth 1000, respectively, and each number vaguely corresponds to the V8's new output. The 900's 6.2-liter produces 912 horsepower and 873 pound-feet of torque, increases of 210 and 223, respectively, compared to the standard TRX. Hennessey achieved these figures by upgrading the supercharger pulleys and making relatively basic changes to the intake and exhaust systems. Stepping up to the 1000 unlocks 1,012 horsepower and 969 pound-feet of torque, numbers that give the 6,300-plus-pound truck the uncanny ability to reach 60 mph from a stop in 3.2 seconds. It flies through the quarter mile in 11.4 seconds at 120 mph. Building a pickup with supercar-like acceleration required installing a bigger, 2.65-liter supercharger, adding high-flow fuel injectors, and recalibrating the ECU. Intake and exhaust modifications are on the menu, too. Surprisingly, it doesn't sound like Hennessey made significant internal changes to the engine or to the transmission, which suggests the standard components can handle a massive amount of power. Context is useful here. Released in 2013, the fifth and final generation of the Dodge-turned-SRT-turned-Dodge again Viper took 3.3 seconds to sprint from zero to 60 mph, and it logged an 11.5-second quarter-mile time. Previewed in a computer-generated sketch, the Mammoth 1000 (shown above) also receives 20-inch wheels wrapped by 35-inch off-road tires, a 2.5-inch suspension lift, custom bumpers on both ends, extra LEDs up front, electronic fold-out steps, plus an array of model-specific emblems. Inside, Hennessey added a numbered plaque. 200 units of the Mammoth 1000 will be available for the 2021 model year, and pricing starts at $135,350 including the cost of the donor truck (which carries a base price of $71,790) and a warranty valid for two years or 24,000 miles. Put another way, you get 30.6% more power than stock for about 40% more money.

2019 Ram 3500 Regular Cab Big Horn Review | No B.S., just lots of truck

While luxury trucks of all sizes from all makes are growing in popularity, they are particularly prevalent in the heavy-duty segment, where they tow toys worth far more than the truck itself. Want proof? The volume-selling GMC Sierra HD is actually its most expensive version: the Denali, slathered with leather and chock full of convenience features. But the person who buys this 2019 Ram 3500 4x4 Big Horn Regular Cab would say they don't care about any of that crap. This is a dedicated tool for towing and especially hauling — even more dedicated than the Ram 2500 HD that was also overhauled for 2019. It has a regular cab with a three-person bench and no back seat. It has the longest bed available at 8 feet with the heftiest payload. Packing a standard 6.4-liter 410-horsepower Hemi V8, it can tow as much as 17,490 pounds. The 3500 is also the only Ram pickup that doesn't have a coil spring rear suspension. The five-link setup with coils in the 1500 and 2500 are abundantly strong for their respective segments, while providing superior ride and handling to boot, but when you enter 3500 territory, the old-fashioned leaf spring is still required (an auto-leveling rear air suspension that still utilizes the leaf springs is optional, but our truck was not so-equipped). Remember this when you're choosing between 2500 and 3500 trucks, because if you don't need the 3500's extra capability (more on that later), you're going to be suffering when the bed isn't loaded or the tongue isn't attached to something humongous. The ride is quite simply appalling, crashing over bumps and launching you from your seat into the shoulder belt. The 2500's is far superior. But of course, anyone who has ever driven a "1-ton" pickup would find such a comment charming. "No kidding," they'd likely say, "tell us something we don't know." Well, it probably wouldn't be that the ride settled down substantially when I loaded it with a relatively paltry amount of weight. The 500 pounds of mulch I dropped into the bed was quite obviously a light lift for a truck with a 4,660-pound payload, but I can't dump river rock into every truck I test. I also didn't have a 17,000-pound something around to tow. I hereby apologize. Yet, the point of this heaviest-duty regular-cab pickup was still made. If you owned a number of different vehicles or needed something to keep on a ranch for working purposes only, this is exactly the type of truck to keep on hand.

Ram pickups to keep it steel through 2020

One of the hottest topics in the industry these days is automakers' expanding use of aluminum, especially for vehicle bodies and platforms. While the lightweight metal has historically been the preserve of premium brands and sports cars, Ford shocked the industry when it announced that its 2015 F-150 would go aluminum-intensive for its new generation. As it turns out, the material change doesn't even mean a big jump in the prices for most of its trims. Possibly in reaction to the big change, General Motors is said to be using the lightweight metal in its next-gen trucks, too. That only leaves Ram as an open question among the domestics, and at least for now, the company is apparently in no hurry to push tin.
According to Reuters speaking with two, unnamed insiders, the Ram 1500 isn't getting an aluminum infusion until sometime after 2020. That's not to say the truck is going to be stagnant for the next half-decade or more, of course. According to Ram's five-year plan, there's a refresh for the 1500 coming in 2015 and much bigger changes on the way in 2017. Those same sources tell Reuters that further revisions aren't expected until at least 2021, which is when the aluminum could be added.
Fiat Chrysler Automobiles CEO Sergio Marchionne hasn't minced words about his thoughts on using the lightweight metal in pickups. "I have better use of aluminum in this house than a pickup truck," he said in May. Having said that, Marchionne was clear that if the material turns out to be revolutionary in the segment, the company would be willing to follow.