2018 Ram 1500 Laramie on 2040-cars

Auto blog

Best cars for snow and ice in 2023 and 2024

What's the best car for snow? The real answer is "the one with winter tires." What do we mean by that? You could have the finest, most advanced all-wheel-drive system or four-wheel drive in the world, but if you're running all-seasons (the spork of tires), your fancy four-wheeler won't matter much. The odds are, any vehicle on the road running good winter tires will probably perform adequately in slippery, slushy and/or snowy road conditions. (Here's a more complete explanation of why winter tires are totally worth it). In other words, you don't really need any of the cars on this list. With a set of winter tires, countless others will do the job, and even these will be at their best with proper rubber. You can find a variety of winter tires for your car here at Tire Rack. Keep in mind that you will need a full set of four snow tires for safety and performance, no matter what you're driving. The days of your dad putting just two snows on the family truckster to get it moving in a straight line are long gone. Don't get us wrong, getting a car that performs well in snow and ice is still a worthy criteria for car buyers. According to the U.S. Transportation Department, 70% of Americans live in places that get snow and ice. And much of the country has been blasted with arctic air for much of the new year. So let's look at the cars. First, we're highlighting choices for a variety of buyers and price points. Second, we're not just considering snow; we're considering general wintery conditions people will experience driving to work or school. As such, these are all choices with advanced all-wheel-drive systems, usually with "torque-vectoring" systems that not only automatically shunt power front and back, but side to side between the rear axles. Most have extra ground clearance for getting through deep snow, and we prefer those vehicles with more responsive steering, throttles and transmissions that provide a greater sense of vehicle control in slippery conditions.    Acura RDX Read our Acura RDX Review Acura's Super-Handling All-Wheel Drive system was one of the first to offer torque-vectoring, and besides often being touted for its ability to greatly enhanced dry-road handling, its benefits in the slick stuff can be profound. It's actually surprising that Acura hasn't leaned into this capability further by offering more rugged versions of its vehicles.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Trump tells Detroit 3 CEOs he wants more US jobs, calls environmentalists 'out of control'

As expected, President Donald J. Trump met with top executives from FCA, Ford, and General Motors this morning as part of a larger push to generate jobs in America. "I want new plants to be built here for cars sold here!", Trump said in a tweet ahead of the meeting. Not everything said in the meeting was made public, but the President later tweeted that he had a "Great meeting with automobile industry leaders." FCA CEO Sergio Marchionne, Ford chief Mark Fields, and GM's Mary Barra all echoed the positive vibes after the meeting. In a statement, Barra called the discussion "very constructive and wide-ranging," adding that it focused on "policies that support a strong and competitive economy and auto industry," and "that supports the environment and safety." That's noteworthy, because Trump is reported to have said "I am to a large extent an environmentalist. I believe in it, but it's out of control." Fields, speaking to reporters after the meeting, said, "We're excited about working together with the president and his administration on tax policies, on regulation and on trade to really create a renaissance in American manufacturing." The Ford CEO was specifically talking about Trump's withdraw from the Trans-Pacific Partnership. "We've repeatedly said that the mother of all trade barriers is currency manipulation, and TPP failed in meaningfully dealing with that, and we appreciate the president's courage to walk away from a bad trade deal," he said. Marchionne focused on American manufacturing in his statement after the meeting. "I appreciate the President's focus on making the US a great place to do business. We look forward to working with President Trump and members of Congress to strengthen American manufacturing." Perhaps equally as interesting as what was said and who was invited are what wasn't said and who wasn't invited. Trump has been very vocal about his distaste for US automakers' plants in Mexico, but no mention was made of the North American Free Trade Agreement by Trump or any of the Detroit CEOs after the meeting. We also have to wonder if Trump plans to meet with representatives from German, Japanese, and Korean automakers that have made massive investments into American plants and produce a large number of cars in this country. Related Video: News Source: Reuters, General Motors, Fiat Chrysler Automotive, Donald J.