2017 Ram 1500 Lone Star 4x2 4dr Crew Cab 5.5 Ft. Sb Pickup on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

2019 Ram 2500, 3500 Heavy Duty get the Lone Star treatment

Just like with most other pickup trucks, the 2019 Ram 2500 Heavy Duty and 3500 Heavy Duty models are getting a Texas-only special edition. It's called Lone Star, like its 1500 counterpart, and it's a midlevel trim roughly analogous to the Big Horn available in the rest of the country. What distinguishes it as a Lone Star are standard chrome door handles, bumpers and grille surround. The dead giveaway, though, will be the Lone Star badges that dot the exterior. The truck also gets some towing goodies such as a standard Class V tow hitch, electronic trailer brake controller and power trailer mirrors. Inside, buyers can choose from four color combinations including black and gray, black and brown, black and beige, and all-black with either bench or bucket front seats. There's also the option to have a door over the passenger side dash cubbie, and that door will feature the Lone Star badge. The Lone Star trim is available in just about any 2500 or 3500 configuration you desire. Regular, Crew and Mega Cabs are all available, as are both standard and long beds. The 6.4-liter gas engine is standard with the midrange Cummins diesel an option on the 2500, and the high-output Cummins diesel with its 1,000 pound-feet of torque an additional option on the 3500. Four-wheel drive and two-wheel drive are both available. The Lone Star Ram Heavy Duty models will go on sale in Texas during the second quarter of this year. The 2500 starts at $39,340 with destination, and the 3500 starts at $40,790. That's a price increase of about $4,000 over the base models.

2019 Ram HD Chassis Cab trucks: tough on the outside, comfy on the inside

The past year or so has been big for Ram. FCA's truck division went from having some of the most dated (though still solid) pickups on the market to introducing the 2019 Ram 1500, arguably the new segment leader. A year later, at the 2019 Detroit Auto Show, FCA revealed the new Ram Heavy Duty. Yesterday, Ram announced the 1500 was getting a trick tailgate to compete with the power tailgate on the Chevy Silverado and MultiPro tailgate on the GMC Sierra. Today, at the 2019 Chicago Auto Show, FCA will present the new Ram 4500 and 5500 chassis cab models. Like the Ram 2500 and 3500, the new chassis cab trucks appear to share a lot with the current crop of Ram HD trucks. The cab itself appears to be unchanged from the outside, though the front fascia has been updated to reflect Ram's current design. As with most things, it's what's inside that counts. The chassis cab models get the fantastic interior from the 2019 Ram 1500. It's a handsome and well-appointed cabin. Even base Tradesman models benefit from the new design and packaging. There's new tech, too. The 12-inch infotainment screen is nice to look at, but customers are likely to enjoy features like adaptive cruise control, forward collision warning and automatic emergency braking (with trailer brakes). The safety tech is available on all trim levels. The trucks also pack parking assist and a 270-degree camera view. There are also camera features to help hook up trailers (including fifth-wheel goosenecks). The Ram Chassis Cab 3500, 4500 and 5500 represent Class 3, 4 and 5 GVW ratings. As such they pack some punch under the hood. The standard engine is the 6.4-liter Hemi V8 making 410 horsepower and 429 pound-feet of torque, though 4500 and 5500 models only make 370 horsepower. The Ram 3500 features cylinder deactivation to improve fuel economy. The three trucks are available with a 6.7-liter Cummins turbo-diesel inline-six. The engine makes 360 horsepower and 800 pound-feet of torque. An Aisin six-speed auto is available on V8 models and standard with the diesel. Both engines are available with dual alternators. The trucks are available in four industry-standard frame lengths measured in inches from the cab to the rear axle: 60, 84, 108 and 120. Upgraded brakes should shorten stopping distances and improve pedal feel. Thanks to high-strength steel and aluminum, the truck should weigh about 120 pounds less than before.