2017 Ram 1500 4x4 Extended Laramie-edition(hemi V8) on 2040-cars

Auto blog

2021 Ram 1500 could finally get tech handed down from HD lineup

Based on details gleaned from spy shots of a 2021 Ram 1500 Laramie Sport Quad Cab 4x4 prototype, Mopar Insiders believes the 2021 Ram 1500 will adopt a few serious pickup convenience features, two of which have found homes on Ram heavy duty pickups for years. The first is towing mirrors with cameras as part of the pickup's 360-degree camera system. The Surround-View Cameras can be had as part of the Advanced Safety Group on the 1500 now, but they haven't been available with the trailer tow mirrors. On the heavy duty Rams, the Surround-View Cameras come as part of the Towing Technology Group. It's possible Ram will address the omission with next year's 1500 pickup. The same mirrors have been seen on the Ram 1500 Rebel TRX prototypes as well. The second hand-me-down from the heavy duty range is a bed-view camera mounted on an LED brake light at the back of the cab — Ram calls it the Center High-Mount Stop Lamp with Cargo View Camera. Some Ram owners making mods to their trucks, like installing a Tazer DT plug-in to access more vehicle settings, have discovered the camera line already installed as part of the harness. Next year could be when Ram decides to activate it. The last feature is trailer steering knob that serves a similar function to the Pro Trailer Backup Assist that can be optioned on the Ford F-150. The knob has been seen on leaked interior shots of the Rebel TRX, so it's assumed to spread to the rest of the 1500 trims. When backing up with a trailer, a driver turns the steering wheel in the opposite direction he wants to trailer to go. To make the job easier for occasional haulers, in a truck with trailer steering feature, the driver turns the dial in the direction he wants the trailer to go, and the software takes care of turning the truck to make the request happen. Since the fifth generation Ram 1500 only arrived for the 2019 model year, we don't expect substantive changes for 2021. Another big addition would be Uconnect 5, which debuts on the 2021 Pacifica but could slide to the Ram side of the family before the new model year. Related Video:

2019 Ram 1500 prototype gives us better glimpse of grille

Though we've managed to see most of the 2019 Ram 1500 from previous spy shots, we're still discovering new details here and there in spy photos. The latest batch shown above feature a truck with camouflage that covers most of the body, but curiously leaves the grille practically bare. The grille appears to be a version of what we saw on the nearly uncovered example from a few months ago. This time, that central bar is uncovered. In some ways, it looks like a sleeker version of the grille found on current Laramie Rams; the holes on either side of the emblem area are slimmed way down, and fit a single line. We can also see that those holes line up with the turn signal/daytime running light elements in the headlights. If you're not a fan of this new grille, the good news is that there will probably be a variety of different designs available, just as there are on current Rams. There aren't many other details to glean from this prototype, though. It appears to be the longer of the four-door models and has an impressive amount of glass area. The tailgate is fully covered, so we can't tell if this has a conventional drop-down gate or the split version we've seen on another prototype. We should know much more in about a month when the Ram 1500 is expected to appear at the 2018 Detroit Auto Show. For more about the Ram including renderings of the final truck, check out our post on what we know so far. Related Video:

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.