2016 Ram 1500 Laramie Longhorn on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

2019 Ram 1500 V8 First Drive Review | New pickup has more of everything

SCOTTSDALE, Ariz. – There's a lot going on with the 2019 Ram 1500: inside, outside, out back, and under the hood. New engine options — two of which feature 48-volt eTorque assistance for extra grunt — and lots of attitude-heavy trims. But our first experience with the '19 Ram is focused on the totality of the truck experience — taking a step back, a deep breath of desert air, and soaking it all in. Ram is staking out a fascinating niche in an incredibly competitive segment. More than anything, this is a very comfortable truck, and that's exactly what it needs to be. Remember, Ram ditched leaf springs for coil springs 10 years ago, figuring a smoother ride outweighed the cost. That didn't make it less truckish, since capabilities also increased. And the same goes here: The suspension geometry is tweaked even further, giving it better control over speed bumps in the Phoenix suburbs as well as the desert washes, guarded by saguaro sentinels. Lest you think this means the 1500 gives up anything on its predecessor, properly equipped the '19 can tow up to 12,700 pounds. Yes, with the 1500 ... not a dual-axle, heavier-grade 3500 or something. Maximum payload is up to 2,320 pounds, too — although that rating is only for a 3.6L 4x2 with a 3.55 rear end. There's got to be a tradeoff, right? Maybe Ram pinched the interior to save weight. Nope — both the Quad and Crew cabs are bigger. The Crew Cab grows more, though, with 4 extra inches of extra wheelbase finding its way into the massive space behind the front seats — there's 45.2 inches of legroom back there, which is about 5 inches more than before. This process of critically assessing the Ram, looking for clues that something was worse or amiss, simply came up empty. The only area the 1500 seems to show weakness is in pricing — generally it's more expensive across the board, by a few hundred dollars, although some of that is offset by favorable options packaging or additional content. And, of course, with increased complexity there's the potential for higher running costs down the road — something we can't evaluate until these trucks have been on the road for years. Back to the present: The conclusion we came to is that Ram simply invested in multiple areas in this truck. A bit of the cost is passed onto the buyer, but not as much as you'd think. To translate from beancounter: Pay a little bit more, get a lot more.

Chrysler called out over lackluster Ram Runner by racer who helped develop it

Fans of off-roading and desert blasting might recall that Chrysler offers an aftermarket conversion that can turn a Ram 1500 into a road-legal desert racer, called the Ram Runner. The kit, sold through Mopar, includes some significant suspension upgrades, body tweaks and a brawnier cat-back exhaust for the truck's 5.7-liter V8.
Considering all of this, comparisons with the almighty Ford F-150 SVT Raptor are common. Among the off-road community, that makes these two a sort of Chevrolet Camaro and Ford Mustang for people that prefer driving on dirt. In the Race-Dezert forum, the discussion as to which truck was better was proceeding as normal - Ram fans said their piece and Ford fans said theirs. Then, a man named Kent Kroeker offered up his two cents.
See, Kroeker is a Baja racer, and the man that helped develop the Ram Runner. Despite his association with the truck, though, he had some less than kind words for Chrysler and the Ram Runner.