2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Ram confirms Fiat Doblo-based ProMaster City for North America

As Sergio Marchionne flies back and forth between Turin and Auburn Hills, he doesn't just bring Chryslers back with him to Italy to sell as Lancias. He also brings Fiat products to sell Stateside under various Chrysler labels, chief among them Ram.
The former Dodge truck brand launched the Fiat Ducato as the Ram ProMaster earlier this year, giving it a greater foothold in the commercial vehicle market and a replacement for the Sprinter which Mercedes-Benz took back from its Chrysler-partnership days. Now Auburn Hills has announced that Ram will begin selling the Fiat Doblo on this side of the Atlantic as the Ram ProMaster City.
The Doblo, which was twice named International Van of the Year, has sold over 1.3 million units worldwide. Whether that includes the rebadged version which Vauxhall and Opel sell as the Combo is another matter, as is the question over how much longer Fiat and General Motors will continue that particular partnership as the ties between Fiat and Chrysler deepen.

2021 Ford F-150 Raptor vs. 2021 Ram 1500 TRX | How they compare on paper

Yep, the F-150 Raptor is back, though you'd be forgiven for not noticing that it ever left. Ford's off-road model is taking a few months off to accommodate the broader 2021 F-150 redesign from which it benefits. And the fine folks over at Ram took full advantage of that lull to launch the new 702-horsepower TRX, which in one big way (hint: it's the engine) stands at the top of the performance pickup heap. Ford says that's all going to change in 2022, but for now, the Raptor returns with a familiar 3.5-liter EcoBoost V6 (albeit with an unspecified power figure) along with several other revisions to Ford's tried-and-true formula. The 2020 Raptor was already a worthy adversary to the beefy Ram despite the latter's definitive power advantage, so how has that picture evolved for 2021? Let's take a look.    Powertrain This is a big question mark for the Ford right now, but it seems reasonable to expect a bit more than the outgoing model's 450 horsepower and 510 pound-feet of torque. The TRX's Hellcat-sourced powerplant needs no introduction. Its 702 horsepower will easily eclipse whatever Ford has planned for its 3.5-liter twin-turbo V6, even if the V6 has more grunt than it did before, but that's OK. It's not the base-model Raptor's job to dethrone the TRX in straight-line speed; that honor will go to the 2022 Raptor R. We also don't know what the Raptor's fuel economy will be like, but we suspect it will be better than the TRX's, if only slightly.  Both these trucks come with four-wheel-drive standard, and they both have a number of drive modes that alter the powertrain’s characteristics depending on the terrain. Baja mode transforms the trucks into the desert runners that they both are at heart, but theyÂ’re plenty capable of crawling around rocks, too. We wonÂ’t know for certain which is best at specific tasks until we can get them both on (or off) equal ground. Suspension / off-roading capability And the ground is where things narrow significantly, both on- and off-paper. The specs are freakishly similar when we compare ground clearance, approach/departure angles and water fording, but the Raptor's leapfrog here is clearly evident. Both trucks utilize a coil-sprung rear suspension now, with Ford having abandoned the Raptor's previous leaf-spring setup with the redesign.  The two use different shocks to handle 100-mph-plus desert running.