2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

2020 Ram 1500 EcoDiesel fuel economy numbers are right in the zone

Every new truck spec gets it own awards show nowadays. In this next envelope we have EPA fuel economy ratings for the 2020 Ram 1500 EcoDiesel — drumroll, please: 22 miles per gallon in the city, 32 mpg highway, 26 mpg combined for the 4x2 trim; 21 mpg city, 29 mpg highway, 24 mpg combined for the 4x4. As one would expect, the numbers plop the EcoDiesel in the middle of the pot with light-duty diesel versions of the 2020 Chevrolet Silverado 1500 and 2019 Ford F-150. In 4x2 guise, city mileage for the EcoDiesel ties the F-150 and is one mpg short of the Silverado, highway mileage rates two mpg more than the F-150 and one mpg short of the Silverado. In 4x4 trim, EcoDiesel city mpg is one mpg more than the F-150 and two mpg short of the Silverado, EcoDiesel highway number is four mpg more than the F-150 and ties the Silverado.    Of course, Ram would also like you to know that when it comes to output and carrying, the third-generation oil-burner tops the half-ton trio with 480 pound-feet of torque, 20 lb-ft more than the Silverado, and posts the highest tow rating at 12,560 pounds. Buyers who opt for the 4x2 diesel Ram and the 33-gallon tank will be able to travel the furthest, too, going beyond 1,000 miles before the fumes give out. Every trim gets the new EcoDiesel option for 2020, including the Ram Rebel for the first time. The 3.0-liter V6 is a $4,995 option, making it either $3,000 or $3,300 more than the 5.7-liter Hemi V8 eTorque trim depending. The EcoDiesel price ladder starts with the Tradesman Quad Cab at $36,890 plus a $1,695 destination charge, for $38,585 total. The 2019 Ram 1500 Classic will continue offering the second-generation 3.0-liter EcoDiesel, starting at the unchanged price of $40,835 for the Tradesman Crew Cab 4x2.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

Ram wants its midsize truck situation 'fixed soon'

The rumors of a midsize Ram pickup are like a metronome — sometimes in motion, sometimes dead. This week the rumor is alive, so reports Automotive News. Fiat Chrysler CEO Mike Manley admitted during an earnings call that the lack of a mid-sizer is "a clear hole in our portfolio," and that the Ram product development team is "focused on it." Puzzling that out means finding "a cost-effective platform in a region where we can build it with low cost and it still being applicable in the market." But he wants a solution found soon. During the product roadmap presentation FCA made in June last year, late CEO Sergio Marchionne said the middling pickup would be built in Mexico. That tidbit came after years of Marchionne saying the brand would get in the segment, only to have the idea shot down by Ram bosses. At the 2012 Detroit Auto Show, a year after the midsize Dodge Dakota went off the market, Marchionne said the brand would reinstate a new-generation Dakota, with a better-than-50% chance it would be unibody. In 2013, then-Ram president Reid Bigland said the chances were tiny because the numbers didn't add up. The two men got on the same page, in favor of, in 2014. In March 2016, Marchionne said, "I like that space a lot," and "It's a good space to be in." Exactly one month later, then-Ram CEO Bog Hegbloom said the idea was dead because he couldn't make a business case for it. Come early 2018, even Marchionne had joined the naysayers. He told Automobile, "We did not think it was necessary to re-enter that market after our last experience." The snag was, and remains, that a smaller truck has "a cost structure very similar to our Ram 1500. We have not found an economic way to get this done." Four months later, there's a midsize pickup on the product roadmap. Then, at this year's New York Auto Show, Ram Trucks boss Jim Morrison told us Ram had no plans yet for a smaller pickup, although the division continues to look at its options. Last September an Automotive News report forecast the truck to be built in Toledo alongside the Jeep Wrangler and Gladiator pickup. When Car and Driver asked for clarification about Toledo or Mexico, FCA pointed to Marchionne's comments referring to Mexico. It appears that's the angle Manley and his team are still trying to make work. The Saltillo, Mexico, assembly plant now builds Ram's heavy-duty trucks, but observers expect HD production to move to the U.S. to make room for the smaller pickup.