2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Mopar announces retractable bed step for Ram's 1500 and Heavy Duty pickups

As trucks get taller, hopping into the cargo box without performing contortionist-like moves becomes increasingly difficult. Mopar solved this problem by developing a retractable bed step that's compatible with Ram's pickups. When it's not needed, like when the truck is moving, the step is tucked under the cargo box. Where it's mounted depends on the model. It can be bolted on the left side of the hitch (if equipped) on 1500 trucks equipped with the 60/40-split MultiFunction tailgate, or directly below the driver-side corner of the bumper in Classic and Heavy Duty models. Either way, users can extend it with their foot, so they can step into the box even if their hands are full. Mopar noted it makes the step with high-strength aluminum, and it applies either a black e-coat or a powder-coated finish for better durability. There's no word on whether users can install it on their own, or if it needs to be added by a technician, but we can't imagine it requires cutting or welding. Odds are it's held by sturdy bolts. Mopar cargo box step for Ram 1500 View 4 Photos On sale now in the United States and Canada, the retractable bed step developed for trucks with a split tailgate wears part number 82216265AB, and it's priced at $395. It can hold up to 350 pounds. If your 1500 has a one-piece tailgate, the step you need also offers a 350-pound capacity but it carries part number 82215289AG and it costs $365. Heavy Duty owners need to ask for part number 82215842AE and set aside $365. Mopar didn't forget about motorists who own an older truck. Part number 82214245AD corresponds to a step that fits the last-generation 1500, which is still available new as the 1500 Classic, and it can hold 300 pounds. It was developed to fit single- or dual-exhaust models, according to Ram, and it's the cheapest of the bunch at $304. Numerous aftermarket manufacturers offer extendable bed steps, it's an accessory that has been around for years, but Mopar's stands out because it's covered by a warranty that's valid for two years regardless of mileage, or for the remainder of the truck's three-year, 36,000-mile warranty. If you're looking at the competition, the Chevrolet Silverado and GMC Sierra twins are available with steps integrated into the cargo box and the rear bumper, so they don't extend, but the latter's MultiPro tailgate can be configured as one wide step. Chevrolet might soon offer it, too. Related Video:

Mopar Muscle is Monster Jam's first OEM monster truck in over a decade

New monster trucks seem to join the Monster Jam circuit every year, but it's not often that one gets the official blessing of an automaker. That's about to change, however, as Chrysler's truck division has teamed up once again with Hall Brothers Racing - which already fields the championship-winning Raminator and Rammunition trucks - to field the series' first new Original Equipment Manufacturer monster truck in over a decade.
Dubbed Mopar Muscle, the new Ram monster truck will debut at the Monster Jam in Detroit on Saturday at Ford Field, at the first of six such events in which Mike Miller (who, incidentally, named his son Hemi) will drive the truck throughout the year.
Here's what you need to know: Based on a 2014 Ram HD pickup (or at least made to look like one), Mopar Muscle stands 10 feet tall and weighs over 10,000 pounds, and it's powered by the legendary Gen II 426 Hemi that celebrates its 50th anniversary this year. But instead of leaving the massive 7.0-liter engine as is, Hall Brothers Racing enlarged it to 565 cubic inches - a mind-boggling 9.3 liters - and supercharged it to 2,000 horsepower. That's a whole lot of muscle no matter what it's packed into. Check it out in our high-res image gallery above. You can also check out the full schedule of events in the press release below to see if the truck is coming to your area this year.