2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

2019 Ram 1500 eTorque Drivers' Notes Review | Filling in the gaps

When the 2019 Ram 1500 debuted earlier this year at the 2018 Detroit Auto Show, the biggest news was arguably the addition of the 48-volt mild hybrid system. Dubbed eTorque, the system is standard on V6-equipped models and a $1,450 option on trucks with the 5.7-liter Hemi V8. It's not a hybrid in the traditional sense. Despite Ram's claim that the system adds up to 130 pound-feet of torque on the V8, it only does so for a fraction of a second and doesn't actually change the engine's total output. You'd be hard pressed to notice a difference if you didn't know the system was there. But that's kind of the point. There's been a lot of confusion about what eTorque is and how the system works. Much of that falls on FCA's shoulders. The automaker didn't do a great job of explaining the whole thing, leaving us to work out much of it for ourselves. This isn't meant to boost performance, towing or payload. The Ram eTorque can't run on battery power, so don't expect a Toyota Prius with a bed and wood trim. It's here to make the truck just a little bit more efficient by improving areas where conventional internal-combustion engine's fall short. The eTorque system replaces the engine's alternator with a small, belt-driven electric motor. On the V6, the motor is part of the water pump assembly and driven by that belt; the V8 uses a dedicated belt that's separate from the other accessories. A small battery pack is mounted upright behind the rear seats inside the truck's cabin. There's also a DC-to-DC converter to charge the battery and convert 48 volts down to 12 to power the truck's normal systems. Visually, the only difference between an eTorque-equipped model and a standard one is a small metal box at the top of the engine. There's no badging and the battery pack can't be seen, even with the rear seats folded up. The system is designed to be as seamless and innocuous as possible. The auto start/stop system spins up the engine a little quicker. Shifts from the eight-speed ZF automatic transmission are a little smoother as the eTorque system smooths out and fills in the gaps. It does so for a fraction of a second, but it works its magic often. Big gains in fuel economy have already been made. It's going to take things like Ram's eTorque system to improve internal combustion engines from here on out. Editor-in-Chief Greg Migliore: I'd like to say I noticed a huge difference between the Ram eTorque and the regular Ram, but I didn't. That's how it's supposed to work.

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.