2014 Ram 1500 Slt on 2040-cars

Auto blog

Maxwell RHEV Prototype First Drive Review | More than meets the eye

The Maxwell RHEV looks just like any small business' panel van, sporting large vinyl graphics and unassuming steel wheels. You'd have no idea that the co-founders of the startup based out of Seattle had grafted a salvaged Voltec powertrain from a junkyard Chevy Volt into this Ram ProMaster. Somewhere, a battery pack lurks. Maxwell's co-founders, CEO Max Pfeiffer and engineer Trey Camp, open the cargo area to reveal a completely unaltered space. Both are ex-Tesla employees with a long fascination for the #vanlife movement – that their interests intersected in a hybrid cargo van isn't surprising once you start talking to them. This is their first vehicle, a salvaged ProMaster sidelined with a blown 3.6-liter Pentastar, and it's both their prototype and the only Maxwell in existence right now. That said, the company is building a low-roof version for a customer, which will be lighter, have less aero drag and therefore be more efficient. The company is just emerging from a stealth startup mode, and while their backstory is fascinating, I'm still wondering where the Volt's 18.4 kWh battery pack is. "There's nothing in the back ... we're able to get the battery underneath the floor, in the center," Pfeiffer says. Ducking my head under the side reveals, sure enough, a little underside blister that contains the battery, tucked up neatly. The other changes to the RHEV – short for Range-extended Hybrid Electric Vehicle – are minimal. He pops the hood. There are some rough edges, but the 1.5-liter, 101-horsepower engine and 48-kW motor fit comfortably on custom engine mounts and with re-routed exhaust, behind a fascia that improves aero and houses the charge port. Custom axles send power to unaltered Ram hubs and brakes. "This version, it's a little bit prototype-y," Pfeiffer says. "We've had more time to work with the CAD [computer-aided design, engineering drawings] we were able to get from GM and Chrysler, and we've done a better job packaging for production." GM already spent billions on the Voltec and its controlling software, and Maxwell can happily ride those coattails. Despite the help GM has lent Maxwell, there are no official ties. An emulator sends spoofed signals to the Ram instruments, which have a new custom-printed face. The Ram's body control module is left alone. For powertrain faults, Maxwell says the vehicle can theoretically be serviced by any Chevy dealer, and any issue with the rest of the vehicle can be handled by a Ram service shop.

2016 Ram 3500 Heavy Duty now offers 900 lb-ft of torque

After last year's bump to a massive 865 lb-ft of torque for its 2015 3500 Heavy Duty pickup, Ram certainly isn't taking a rest. The model already offers the best towing capacity and most torque in its class, but both figures are growing even higher for the 2016 model year. Now, customers that really need some grunt can order the Cummins 6.7-liter inline-six diesel in the 3500 with a staggering 900 pound-feet of torque and 385 horsepower. Ram claims that this huge figure is the most torque ever available in a mass production vehicle, and it tops the 2015 model by a healthy 35 lb-ft. The added grunt comes thanks to adjustments to the fuel delivery and the turbo's boost, and to better handle things, the rear axle gear now is held with 16 bolts, rather than 12. The tweaks also push the tow rating to an SAE J2807-certified 31,210 pounds, which is absolutely monumental. While not available with the 900 lb-ft version of the Cummins, the Ram 2500 also sees a tiny boost in its max tow rating. The trucks are now capable of hauling up to 17,980 lbs, versus 17,970 lbs last year. The 2016 Ram Heavy Duty trucks go into production in the third quarter and should start arriving at dealers during the fourth quarter of 2015. Prices for the 3500 start at $33,185 and $32,680 for the 2500, after the $1,195 destination charged, respectively. The company hasn't yet announced the cost for the 3500 with the 900 lb-ft Cummins diesel. 2016 Ram Heavy Duty Widens its Leadership Gap With a Triple-decker Presence: Best-in-class Power, Towing Capacity and Payload Capacity • 2016 Cummins 6.7-liter calibration hits a best-in-class 900 lb.-ft. of torque. The most torque ever offered in a mass-production vehicle • 2016 Ram 3500 crushes the competition with up to 31,210 pounds of SAE J2807-spec.

Current Ram 1500 sticking around into 2019

Ram is preparing a big redesign of its 1500 pickup truck for 2018, but for fans of the current truck, don't feel like you need to rush out to grab one – it's sticking around until 2019. That's according to Automotive News, whose sources spoke on condition of anonymity. The move allows Ram to take a two-prong approach to truck sales, offering the current model as a low-cost option for fleet users while pushing retail consumers toward the new pickup. The factories that build the 1500 today – Warren, MI, and Saltillo, Mexico – will assemble around 200,000 trucks in 2018 and 65,000 in 2019 before Ram phases out the older model. Meanwhile, FCA's Sterling Heights, MI, plant will screw together 325,000 redesigned 1500s starting in 2018, with production to increase to over 400,000 units in 2019. While Ram refused to comment when AN reached out, FCA CFO Richard Palmer hinted at the move during a conference call last week, saying "having more pickup capacity will allow us also to satisfy the fleet customers' demand on pickup, which we struggle to do today because we favor retail in the U.S. and Canadian volume, which have higher margins." "As we realign our capacity, we're going to be able to continue to work on improving our fleet mix," Palmer said. Beyond making a play for fleet buyers, continuing to build the current 1500 guarantees dealerships maintain a solid inventory as Ram ramps up production of the new truck. You can check out leaked images of the redesigned Ram here. According to Automotive News, the new truck won't use aluminum, like the Ford F-150, relying on steel instead. FCA's 3.6-liter V6 will provide thrust along with turbocharged options, although there's no mention of the venerable 5.7-liter Hemi V8. Don't read too much into that, of course – we'll eat our shoe if the 1500 ditches the popular eight-cylinder. It's still too early to predict when the 2019 Ram 1500 will debut, but it will likely happen in 2018 at the North American International Auto Show in Detroit or perhaps at a non-auto show event. Related Video: