2012 Ram 1500 St on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Some Ram truck buyer is about to get the 3 millionth Cummins diesel engine

Dodge made a Cummins-built turbodiesel engine available in one of its trucks for the first time during the 1989 model year. Over three decades and a name change later, the company announced it ordered the 3 millionth engine from Cummins, and it's about to drop it in a truck. The 3 millionth engine is patiently waiting on a pallet until it's needed on the assembly line. Ram noted the oil-burning six will be installed in a 2019 3500 Longhorn Crew Cab Dually, a model built for both towing and cruising. While the firm knows who ordered the truck, it chose not to release the owner's name to maintain an element of surprise. The dealership that sold it is planning to host a celebration, so the buyer will only find out that he or she purchased a piece of Ram and Cummins history when arriving to pick it up. The Longhorn isn't the kind of truck you're likely to see on a construction site. Priced in the vicinity of $60,000, it's an upmarket variant of Ram's tow-it-all Heavy Duty pickup decked out with leather upholstery, an eight-way power-adjustable driver's seat, two rows of heated seats, and an 8.4-inch touchscreen for the infotainment system. The high-output Cummins 6.7-liter six adds $11,795 to its base price, meaning the truck receiving the 3 millionth engine costs around $75,000.  Cummins has made several different engines for Dodge- and Ram-branded trucks since 1988. It crossed the 200-horsepower mark for the first time in 1996, and built its first engine with over 500 pound-feet of torque in 2001. The current Cummins, the variant going into the milestone truck, is a mighty, 6.7-liter straight-six that serves 400 horsepower and 1,000 pound-feet of torque.  

More details on the Hellcat-powered Ram Rebel TRX

We got our last big scoop on the coming Ram Rebel TRX last summer, when Jordan Denhoed caught a pack of prototypes testing in Michigan's Silver Lake Sand Dunes. We'd heard then that as opposed to the TRX concept, the production truck would unlock the full 707 horsepower from its 6.2-liter Hellcat V8, and use a traditional shift lever to work the gears of a 10-speed automatic. Now Mopar Insiders and Allpar have another batch of details that both sides said were gleaned from insiders with knowledge of the product. The looks, which will hew closely to the concept, have apparently already been teased. The Dodge and Ram corners of FCA like to foreshadow future offerings in their press photos and flyers, Ram doing so again on a graphic that advertised the FCA 2020 Drive for Design contest, pictured. We're told to expect the same twin-vented hood and flared arches front and back, as well as a new take on the current Ram Rebel grille that frames headlights from the Laramie Black trim. The side-exit exhaust would be cool, but we doubt it makes production. That extra width necessitates amber marker lights. The Ford F-150 Raptor, which uses the same lights for the same reason, places its markers along the top edge of the grille just below the grille surround. Mopar Insiders says the Rebel TRX's amber markers will lurk inside the large hood scoop. The Hellcat will get plenty of air from additional vents astride the headlights, and vent its heat through extractor vents just ahead of the windshield and ahead of the front doors. In lieu of any Hellcat badging save for on the supercharger, script on the hood in the same font as the Rebel TRX concept will read, "6.2L Supercharged." In back, yet more vents mimic those in the front fascia, this time placed next to the taillights. There will be an LED CHMSL, and larger diameter exhaust tips poking out of the bumper. Inside, Allpar says Ram plans to follow the Dodge SRT template by loading up the interior; the question is whether there will be a base model, or if it's only SRT plus options. The luxury angle means the 12-inch Uconnect infotainment system will be standard, with off-road-specific screens among the Performance Pages. Allpar confirms the conventional shifter, and Mopar Insiders says the lever will be joined by aluminum shift paddles borrowed from the Alfa Romeo Stelvio Quadrifoglio. The paddles will be longer than those in the Italian crossover, and mounted on the steering wheel.