2012 Ram 1500 Long Horn Laramie Hemi Navigation Navi Leather Sunroof Dvd on 2040-cars

Auto blog

Towing with the 2016 Ram lineup [w/video]

I do not tow things. Ever. Yet I recently found myself at the Fiat Chrysler Automobiles proving grounds in Chelsea, MI, where I'd be testing the hauling capabilities of Ram's current product range. This experience was not only a perfect education for a towing novice like me, but allowed me to tow far more weight than I'd ever consider hauling the real world, and all within the safe confines of the Chelsea Proving Grounds. There was an extremely diverse array of vehicles at my disposal, including Ram's gasoline- and diesel-powered offerings with trucks ranging from the 1500 on up through the 5500 Chassis Cab, as well ProMaster vans. Beyond that, FCA brought out a number of vintage Dodge pickups for me to play with, while also working with Case IH to provide a track-loader I could test. I put together a range of videos covering everything from the classics to the production trucks to the construction equipment. And despite some technical difficulties – you'll notice a distinct lack of in-car videos, with blame going to a corrupted micro SD card – I've assembled ten videos that give an up-close look at Ram's offerings. 2015 Ram ProMaster City Let's start small. The ProMaster City only has a towing capacity of 2,000 pounds. That's a reasonably impressive figure for a van that uses the same powertrain as a Chrysler 200. The 2.4-liter four-cylinder and nine-speed automatic weren't really bothered with the extra weight added by the trailer. Even when accelerating at freeway speeds, the ProMaster City didn't feel out of breath or hampered by its load. That said, the rear of the van was unloaded, which probably wouldn't be the case for most consumers. It's unclear how the City would feel if its driver were taking advantage of the max payload (1,883 pounds) and towing. 2015 Ram ProMaster 1500 To be polite, the Ram ProMaster is a difficult vehicle to like. Its awkward seating position is bus-like and lacks the visibility enjoyed by the Ford Transit or the utter driving comfort of the Mercedes-Benz Sprinter. Its 3.0-liter, four-cylinder turbodiesel engine, meanwhile, is something of an anomaly. While it's potent for a four-cylinder diesel, producing 295 pound-feet of torque and 174 horsepower, those numbers don't feel all that impressive when loaded down. The model I tested was barely using half of its 5,100-pound maximum towing weight and was loaded down with just 500 of its 3,620-pound payload. Yet it lacked the pluckiness of the smaller City.

Some 2014-19 Ram ProMasters recalled for shifter cables that could detach

The National Highway Traffic Safety Administration (NHTSA) has issued a recall for hundreds of thousands of 2014-2019 Ram ProMaster vans with a 3.6-liter engine. Campaign No. 20V036000 states that the shifter cables on these vans could disconnect from the transmission, which could lead to a variety of unsafe situations. The new recall comes after Fiat Chrysler Automobiles (FCA) has issued transmission-related recalls for several other brand products in recent years. Jeep and FCA were thrust into the spotlight in 2016, when "Star Trek" actor Anton Yelchin's shocking death was linked to what was deemed an unintuitive shifter design. FCA recalled more than 1 million vehicles with a rocker-style eight-speed ZF shifter, including Jeep Grand Cherokees, Chrysler 300s, and Dodge Chargers. The design was unclear to some, and that confusion lead to dangerous rollaways. In 2017, FCA was back in the news when it announced a transmission recall for 1.8 million Ram trucks that had a faulty interlock that could result in the transmission shifting out of park. And in 2019, FCA announced two more transmission recalls, this time for 320,000 Dodge Darts and 51,788 Fiat 500s, both of which had cable bushings that could degrade due to temperature and moisture.  FCA's unsettling pattern has bled into the new decade, as 222,207 ProMasters have been recalled for an entirely separate transmission issue that could once again lead to a rollaway risk. The NHTSA estimates approximately three percent of these vehicles could have built with a transmission gear shift cable that was kinked during production. According to the recall document, "the vehicle population was determined to include all ProMaster vehicles equipped with a 3.6-liter engine from the beginning of 2014 MY production on April 23, 2013, through September 14, 2019, when the vehicle manufacturing process was revised." If the shift cable separates, the shifter is no longer connected to the transmission. The driver, then, would not be able to shift properly, or the transmission could be in a different position than believed. If the driver thinks the vehicle is parked, but it is actually still in drive or neutral, the vehicle could unintentionally move. As a precautionary measure until the vans are checked and fixed, FCA suggests owners use the parking brake when parking these vehicles. FCA will begin notifying owners on March 13, 2020 and plans to replace the damaged parts free of charge.

NHTSA investigating over 600,000 Ram trucks due to stalling engine

More than 600,000 heavy-duty pickups built by Ram during the 2019 and 2020 model years are the target of a National Highway Traffic Safety Administration (NHTSA) investigation due to a faulty fuel pump. Only trucks powered by the 6.7-liter turbodiesel engine are affected. Documents posted on NHTSA's website explain that the agency's Office of Defects Investigation has received 22 complaints and two field reports claiming that the 6.7-liter turbodiesel straight-six either lost power or stalled completely while driving. The issue potentially affects 604,651 trucks, including the 2500, 3500, 4500, and 5500 variants of Ram's popular pickup. The 1500 model is not included. The agency notes that the high-pressure fuel pump is to blame; stalling occurs when the part fails. It adds that the issue mostly happens above 25 mph, and that the engine can't be started again after it turns off. Interestingly, while the investigation was announced in October 2021, Ram has been looking into it since November 2019. It asked dealers to "collect, monitor, and correct quality issues" on some trucks powered by the 6.7-liter Cummins. It has collected and inspected several pumps as a result of this campaign, according to NHTSA. As of writing, there have been no crashes, fires, injuries, or fatalities linked to the alleged defect. NHTSA officials explained they're looking into "the scope, frequency, root cause, and potential safety-related consequences" of the problem. If the issue is deemed a safety hazard, the agency could ask Ram to recall affected trucks and fix them. Ram said it's complying with investigators but provided no further details. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2019 RAM Heavy Duty | Everything You Need To Know About The New RAM Trucks