2012 Ram 1500 4wd Lifted, 22x12 Fuel 2-piece, 35x12.50x22, Red Leather, Lightbar on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

2019 Ram 1500 pickup production problems costing FCA $300M to fix

Fiat Chrysler is spending more than $300 million to fix production issues with the new 2019 Ram 1500 pickup as the plant where it's built is running below capacity and suppliers reportedly struggle to keep up with building it and the 2018 version simultaneously. The truck's ramp-up is well behind schedule, Automotive News reports. FCA's Sterling Heights Assembly plant in Michigan began building the pickup in mid-January but is running at only 60 percent capacity, CEO Sergio Marchionne said on an earnings call last week. Sources told the publication the plant is still undergoing construction and was building about 1,000 trucks per day toward a run rate of 1,400 per day. It's operating two 10-hour shifts per day, seven days a week, with plans to keep the factory running every weekend and holiday through Labor Day to meet production targets. More than 2,500 of the new pickups were reportedly awaiting unspecified electrical repairs before they could be shipped. FCA could use the boost from the heralded new 2019 Ram 1500, which figures prominently in its aggressive annual financial goals. The company is relying on the previous-generation 2018 Ram 1500, demand for which has been sagging. First-quarter sales of the pickup are down almost 13 percent year over year to 103,964, according to carsalesbase.com figures. Meanwhile, sales of Ford's F-Series pickups over the same period rose 4 percent to 214,191, while Chevrolet Silverado sales have climbed 5 percent to 135,545. Dealers have started receiving deliveries of the 2019 Ram 1500, but only the version fitted with the 5.7-liter V8. The EPA has yet to issue fuel economy ratings for the standard 3.6-liter Pentastar V6 paired with the eTorque 48-volt mild hybrid system, nor the same system mated with the V8. As we noted in our recent First Drive review, upgrading to the (non-hybrid) V8 costs $1,195, which is actually $255 cheaper than before. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Image Credit: FCA Plants/Manufacturing RAM Truck sales

Ram adds 875,000 pickups to tailgate recall now totaling 2.4 million

DETROIT — Fiat Chrysler is adding more than 875,000 Ram pickup trucks worldwide to a series of recalls to fix tailgates that can open while the trucks are being driven. The expansion covers certain Ram 1500, 2500 and 3500 pickups from the 2013 through 2018 model years that have power locking tailgates. Affected 2015 through 2017 trucks have 8-foot beds, and the affected 2013, 2014 and 2018 trucks have beds of other sizes and were built before April 1, 2018. Fiat Chrysler says it's not aware of any injuries or accidents caused by the problem. The company recalled about 1.1 million trucks in the U.S. in 2018 for the same problem, and added 410,000 in May of 2019, for a total of more than 2.4 million. Most of the recalled trucks are in the U.S. and Canada. A tailgate tab can fracture and cause the tailgates to unlatch, increasing the risk of cargo spilling onto the road. Dealers will repair the tailgate latch. Owners of the latest batch of recalled trucks will get letters starting around Oct. 18 notifying them to take their trucks to a dealer for service. Fiat Chrysler says the recall expansions came because of reviews of customer data as it monitors vehicles in the field. The company says that all loose cargo in the bed should be secured before driving.