2023 Ram Ram Promaster Ram Promaster 2500 Cargo Van High Roof 159' Wb on 2040-cars

Auto blog

2020 Ram HD trucks revealed in spy shots, along with interior

It looks like FCA isn't too concerned with keeping its redesigned Heavy Duty trucks under wraps before their reveals. Our spy photographers managed to catch a fleet of 2020 Ram HDs running around completely undisguised. Not only do we get to see exterior design details, but there are also shots of the HD's interior in Laramie trim. Shots of the new Power Wagon went up a few days ago, but now we get to see the truck in both Laramie Longhorn and Limited trims. It's clear the trucks are following in the footsteps of the 2019 Ram 1500 redesign for their inspiration — we like the new Ram, so that's a good thing. The departure from traditional Ram HD styling means the retirement of the crosshair grille. We can see this first in the brown Laramie Longhorn at the top here. Thankfully, Ram didn't go as far as GM did with its crazy grille design on the freshly released Silverado HD. That being said, it's still pretty large. It appears more upright and tough-looking than the similarly styled 1500 Laramie Longhorn, but still adopts the same design language. 2020 Ram 2500 Limited View 12 Photos The 2500 Limited doesn't exactly look finished, but it's clear we're looking at a more luxuriously appointed truck from the photos. There's more chrome, and the grille design is much more complex than the Laramie Longhorn. In fact, there might even be a bit too much chrome for our taste — tow hooks probably aren't in need of any shiny bling. 2020 Ram 2500 Power Wagon Tradesman View 8 Photos Finally, we also get to see the Tradesman trim of a Power Wagon. The red looks good on the big truck, but the trim we saw the other day had a much meaner front-end design. This one would be better for those who want a more discreet Power Wagon. Interior shots surfaced alongside these new trucks too. We wouldn't have imagined much difference between the 1500 and HD interiors, and that seems to be the case. The model we're looking at here has the 8.4-inch screen with Uconnect, but the massive 12-incher will undoubtedly be available too. We expect an "official" debut of this truck early next year, with the Detroit Auto Show being the most likely of places for that to happen. Related video:

Fiat Chrysler's Q3 profit boosted by strong North American earnings

MILAN, Italy — Fiat Chrysler Automobiles (FCA) reported a 17 percent jump in third-quarter adjusted operating profit on Tuesday, helped by a strong performance in its key North American market and improving operations in Europe and Latin America. The world's seventh-largest carmaker still makes the lion's share of its profits in North America, so improving, or at least maintaining, its margins there is a key focus. The carmaker reported an 8 percent adjusted operating profit margin in the region, up from 7.6 percent a year ago, despite a drop in sales and shipments. "FCA's profitability in North America remained strong in the quarter despite a weakening market there," a Milan-based analyst said. FCA's profitability compares with an 8.3 percent North America margin reached in the quarter by bigger U.S. rival GM , showing CEO Sergio Marchionne making progress towards his goal of closing the margin gap with GM and the company's other U.S. rival, Ford, by 2018. The company's confirmation of its full-year outlook also pushed shares higher, a trader added. The stock was up 2.8 percent by 1129 GMT, outperforming a 1 percent rise in the European auto index. FCA has been retooling some U.S. factories to boost output of sport-utility vehicles (SUVs) and trucks while ending production of some unprofitable sedans to strengthen profitability as the U.S. car market comes off its peak. The company said a drop in North America shipments due to lower fleet sales and discontinued models was partially offset by higher deliveries of Ram trucks and two models from the Alfa Romeo stable: the Stelvio sport utility vehicle and Giulia sedan. Profitability also improved in Europe, helped by sales of the Stelvio and the new Jeep Compass, and Latin America, while margins at Maserati remained strong at 13.8 percent due to strong demand for its first SUV, the Levante. In a later conference call, investors are looking for hints on the new strategy to 2022 which the company promised to unveil early next year. Chief Executive Sergio Marchionne said earlier this year that FCA would streamline its portfolio and that components businesses, including Magneti Marelli, would be separated from the group, possibly via a spin-off. While FCA confirmed its targets this year, doubts remain about its exposure to a weakening U.S. market, recall costs and potential fines over emissions after it was targeted by European and U.S.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.