Used 2012 Ram 3500 Laramie 4x4 Crew Cab Dwr With Navigation / Back Up Camera on 2040-cars

Auto blog

2019 Ram Heavy Duty gets new face, 1,000 lb-ft Cummins and the towing crown

We've seen uncovered images before in spy shots, but here are the official images and word on the 2019 Ram Heavy Duty pickups. Ram dropped so much verbiage on new features that we'd need the truck's 7,680-pound max payload rating to haul the press releases, so dig in. We'll start with that max payload rating, and the 35,100-pound tow rating. Gimlet-eyed truck watchers will note the Ram HD's max tow rating is exactly 100 pounds more than that available on a Ford Super Duty, meaning the Auburn Hills clan takes the "best-in-class" mantle for a few months. The other big number: 1,000 pound-feet of torque from the high-output version of the 6.7-liter Cummins inline-six turbodiesel, a 70-lb-ft increase over the 2018 Ram 3500 HD. Completing the specs at the top, that HO motor produces all that torque at 1,800 rpm, and makes 400 horsepower at 2,800 rpm. One step down, the standard-output 6.7-liter Cummins puts out 370 hp and 850 lb-ft. Thanks to developments like a compacted graphite iron block, lighter pistons, hollow camshaft, and new forged connecting rods and bearings, the Cummins engine has lost more than 60 pounds. The entry-level motor is a 6.4-liter Hemi gas-powered V8 with an unchanged 410 hp and 429 lb-ft. 2019 Ram Heavy Duty View 12 Photos The HO Cummins pairs to an Aisin AS69RC six-speed transmission, with upgraded hardware and programming for better shifting and oversight of the gravity-warping torque. The regular Cummins mates to a "significantly upgraded " version of the in-house 68RFE six-speed automatic. The 6.4-liter Hemi works with the well-known TorqueFlite 8HP75 eight-speed automatic, bolstered for heavy duty obligations, the first time the eight-speed makes an appearance in a Ram HD. A column-mounted shifter works the gearsets on the Cummins-equipped rigs, a rotary dial on the center stack controls the shift-by-wire eight-speed. The Cummins motors come with two 220-amp alternators. The Hemi V8 gets a 220-amp and a 160-amp alternator, which Ram says is the "first gas-driven application of its kind in either class." There will be six trims available: Tradesman, Bighorn/Lonestar, Power Wagon, Laramie, Laramie Longhorn, and Limited. The HD trucks don't share any exterior sheetmetal with the light-duty 1500, and each trim is known by different grilles, bumpers and wheels.

Midsize Ram truck coming to U.S.

The midsize truck segment is officially back in full force. Today, at FCA's new five-year plan, company CEO Sergio Marchionne and Ram head Mike Manley announced that America will be getting Ram's new global midsize truck. The new model is designed for a global audience. It will not be based on the Mitsubishi Triton, we're told. FCA already sells that model in certain markets as the Ram 1200. Trucks for the North American market will likely be built in Mexico on the old Ram Heavy Duty production line. The upcoming Ram HD — set to debut at the 2019 Detroit Auto Show — will be built in the US. The timing of the new midsize Ram isn't pinpointed, but the above slide from FCA's presentation suggests we'll see it by 2022. A with all upcoming Ram models, look for some form of electrification, likely in the form of the 48-volt mild hybrid system that's set to debut later this year in the 2018 Ram 1500. Don't expect the truck to tailor too heavily to US tastes like the Toyota Tacoma or Chevy Colorado. Like the upcoming Ford Ranger, this is a global truck first and foremost. Marchionne said that Ram's focus in the US will remain mostly on full-size trucks. Still it will be sold in the U.S., just not in any expected large volumes. Related Video:

2020 Ram 1500's new EcoDiesel horsepower and torque revealed

Following on the reveals of Ford and GM's light-duty diesel full-size pickup truck engines, Ram has finally revealed its second-generation EcoDiesel V6 for the 2020 Ram 1500 and 2019 Ram 1500 Classic. The engine is once again a 3.0-liter V6, but it now makes 260 horsepower and 480 pound-feet of torque. That's an increase of 20 horsepower and 60 pound-feet of torque over the previous engine. Ram notes a number of changes were made to achieve these numbers, including adding a water-cooled variable geometry turbo, reducing compression ratio from 16.5:1 to 16:1, adding lighter pistons, revising the intake ports, and using a new fuel injection system and exhaust gas recirculation system. Those numbers also put the new Ram diesel at the top of its class for torque. Just behind it is the 3.0-liter inline-six in the 2020 Chevy Silverado and GMC Sierra that makes a bit more power at 277 horsepower but less torque at 460 pound-feet. Then there's the 2019 Ford F-150's 3.0-liter V6 that makes 250 horsepower and 440 pound-feet of torque. The Ram engine also hits peak torque at 1,600 rpm, which is sooner than the Ford engine at 1,750 rpm. The Chevy engine's torque arrives even earlier than both at 1,500 rpm. The Ram's maximum towing capacity of 12,560 pounds also tops the F-150 diesel's 11,400 pounds. There are still a number of unknowns regarding the new EcoDiesel engine, though. Ram hasn't announced payload capacity, pricing or fuel economy for the engine. We expect fuel economy will be slightly improved over its predecessor's 20 mpg in the city and 27 on the highway. But we don't know if it will match or surpass the F-150 diesel's 22 mpg in the city and 30 on the highway. All these numbers should be announced closer to the engine's release window of fourth quarter of 2019. The engine will also be available in every single trim and configuration of the 2020 Ram 1500 including the Rebel, which used to be a gas-only trim. The engine will even be available on the 2019 Ram 1500 Classic. This should also be the engine that will soon appear in the Jeep Gladiator and Wrangler.