Dodge Ram Mega Cab Laramie 4x4 Cummins Diesel Custom Lift Wheels Tires Nav Auto on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

The EPA has alleged that FCA installed undisclosed emissions software in about 100k Ram and Jeep diesel models [UPDATE]

Update: The text has been updated with official information from the EPA given in a press release and a conference call. Although an initial report from Reuters said the EPA will accuse Ram and Jeep of using emissions defeat devices today, that isn't quite the case. In a press release and a conference call, the EPA stated that the notice of violation sent to FCA is for the installation of eight undisclosed auxiliary emissions control devices on 2014 to 2016 Jeep Grand Cherokee and Ram 1500 models with the 3.0-liter turbodiesel V6. The violation applies to about 104,000 vehicles in total. The agency also explained that auxiliary emissions controls on vehicles are not necessarily illegal, but installing them without disclosing them to the EPA when having the vehicle certified is. Though this initial notice of violation is for installing undisclosed software, the EPA may soon also classify these emissions devices as defeat devices, as it did with the software Volkswagen used. Depending on the outcome of the investigation, there could be fines of up nearly $45,000 per vehicle involved in the notice of violation. The agency revealed that the software alters how the emissions system performs in certain situations. In controlled testing, the vehicles are compliant, but in conditions such as high speed operation, the EPA found the vehicles would produce much higher levels of NOx emissions. The EPA is continuing to investigate, and is waiting for FCA to explain why these emissions control devices are not cheating or defeat devices. In an official statement, FCA stated it is looking forward to explaining that the software does not constitute a defeat device, and has also proposed software updates to achieve compliance. During the conference call, EPA representatives also noted that the vehicles are still safe and legal to be driven, and that owners do not need to take any action yet regarding their cars. It should be noted there is no stop-sale on current models at this time. Additionally, 2017 versions of the 3.0-liter diesel FCA vehicles have not been emissions certified yet. Related Video: News Source: Reuters, Environmental Protection Agency Government/Legal RAM

Ram 1500 custom trucks for SEMA go high and low

For SEMA, Mopar only created two in-house custom 2019 Ram 1500 trucks, and they're fairly mild in terms of modifications, many of which are existing Mopar accessories. But at the very least they show two extremely different ways to upgrade a Ram, with one being an off-road-oriented Ram Rebel, and the other being a lowered, street-oriented truck. The latter mod has become a bit unusual in a world dominated by Raptors and ZR2s. We'll start by talking about the street truck, which is the only one of the two with its own unique name: Low Down. Its defining characteristic: It sits two inches lower than a standard Ram 1500. This was done with a concept lowering kit that Mopar does not offer. Another part not yet available is the hood, which features an aggressive scoop. Finally, inside are some concept aluminum pedals. There aren't plans for any of these to come to production yet, but you can be sure Mopar will be paying attention to the public's reaction, and if things go well, they could show up at a dealer near you. The other defining feature of the Low Down is its paint scheme, which is black over silver, with a stripe separating them painted in the same Brass Monkey bronze hue available on some of FCA's wheels. The factory Ram wheels also get a custom paint scheme. Aside from the special parts and custom paint, almost everything else is right out of the Mopar catalog, including the fender flares, bed cover, spray-in bedliner, 5-inch exhaust tips and cold-air intake. The Mopar-customized Ram Rebel doesn't get a fancy name, but it still gets plenty of tweaks. It uses the factory Ram lift kit, so it sits two inches higher than a stock Rebel. It also features 35-inch tires. Up front, there's the concept hood found on the Low Down. At the back of the bed, there's a new flashy matte black decal that will be available for Ram Rebels in the near future. The bed also has an available "Rambar" sport bar, with some Mopar auxiliary lights. The bed has a spray-in bedliner and a concept spare tire carrier. Out the back are the same 5-inch exhaust tips as on the Low Down. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.