2024 Ram 3500 Laramie Crew Cab 4x4 8' Box on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

If you can't Ram it, you can plow it

While the auto industry is mostly focused on the would-be Geneva Show reveals, there's another show going on in Indianapolis about commercial work trucks. At the show, Ram revealed it would offer a Snow Plow Prep package for the 2021 Ram 1500. Ram already offered a similar (but better named) package for the 2500 called the Snow Chief Group, so this represents an expansion of availability. The package adds exactly what it says: the basics needed to hook up a snow plow. Under the hood, there's an upgraded 220-amp alternator to handle the load of the extra lights and motors from a plow, plus a wiring harness to plug in said plow. It also removes the active air dam to make room for plow mounts and adds a sliding rear window with defroster. All this adds $195 to the price of your four-wheel-drive Ram, which can be equipped as a Tradesman, Big Horn or Laramie with either the eTorque 5.7-liter V8 or 3.0-liter turbocharged EcoDiesel V6. It's a little less comprehensive than the 2500's Snow Chief Group, which adds the alternator, plus a limited-slip differential, auxiliary dash switches, clearance lamps, off-road tires and a transfer case skid plate, but that package also costs more at $845. One important note for any wannabe Mr. (or Ms.) Plows out there: neither the 1500 or 2500 packages include a plow. For that you'll have to go to an aftermarket plow manufacturer. For example, the Ram 1500 shown above has a Meyer Drive Pro plow, which costs over $5,000. So keep that in mind, or you may find yourself using your family to record a homemade commercial for your plow business just to pay for the huge truck you bought. Related Video:

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.