2012 Red Laramie Longhorn! on 2040-cars

Auto blog

2019 Ram 1500 eTorque First Drive Review | The un-hybrids

Misinformation is already being passed around about the 2019 Ram 1500 eTorque – reports calling the new electrified version of the full-size half-ton pickup truck a hybrid and saying its eTorque system adds torque to the truck's engine increasing payload, towing capacity, and performance. Don't believe a word of it – this isn't a hybrid in the conventional sense of the word. eTorque does not increase the truck's power or capability. Instead, the system feeds in some electric torque at low RPM, which helps with fuel efficiency by spinning up the engine during start/stop operation, smoothing gearchanges, and harvesting some energy from braking – that's basically it. Ram is partially to blame for the hybrid confusion. Although the "h"-word does not appear anywhere on the truck or the vehicle's window sticker, the automaker has chosen to call eTorque a "mild-hybrid system", which implies that it might be able to propel the truck on electric power. But the Ram's small battery pack and single electric motor cannot – it's more similar to the original GM Parallel Hybrid Truck system than the later two-motor, two-mode hybrid system circa 2009. Also, eTorque applies power to the engine and the wheels briefly at very low engine speeds and during gear changes. These applications of power only last for fractions of a second at any given time, some as quick as the blink of an eye. So it's a labeling fiasco, but Ram's explanation of the eTorque system's operation and its benefits, which are significant, can also be perplexing. And the resulting discombobulation is unfortunate, because eTorque is clever, and it really does work. Earlier this week we drove two Rams with the system, one a V6 and one a Hemi, through Kentucky horse country, and came away impressed by its measurable contributions to the truck's fuel efficiency, drivability and smooth operation. We also interviewed Mike Raymond, the Chief Engineer on the Ram 1500, and Brian Spohn, Ram's Vehicle Electrification Manager, Powertrain Engineering, to better understand what it is and how it functions. How eTorque works Ram will offer the 3.6-liter 24-valve V6 with eTorque as the standard engine in most models. The V6 will not be available without eTorque, although we'd be surprised if it wasn't added to the menu at a later date.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Ram flubs ProMaster cargo capacity

The Ram ProMaster is going to look a little smaller on the inside, at least by way of its specification sheets, despite the sheet metal staying the same.
When Ram originally published the cargo capacity for its van, it simply did a direct conversion from the European rating of 15 cubic meters to 530 cubic feet. However, that didn't take into account the standard way internal measurements are calculated for the US. While the trucks have been on sale since October, the automaker just noticed the problem, and it's working on a revised figure. According to Automotive News, the new carrying ability for the ProMaster is likely between 450 and 475 cubic feet.
The difference stems from two standards for measuring capacity. In Europe, the entire internal area is determined and then obstacles like seats are subtracted from it. That means areas where freight could never go, like on top of seat backs, gets included in the figure. In the US, only the area where goods could actually fit is included, which leads to lower specs with no actual change in space.