2012 3500 4x4 Mega Cab Automatic Laramie. on 2040-cars

Auto blog

2020 Ram 1500 4x4 Suspension Deep Dive

What is taking everyone so long? That’s what I continually ask myself each time yet another all-new full-size pickup comes out with leaf spring rear suspension. Meanwhile, this 2020 Ram 1500 pickup represents a dozen years since coil spring rear suspension debuted when its prior generation was still being called a Dodge Ram 1500. Ford, Chevrolet, Toyota and Nissan introduced full redesigns of their pickups well after Ram proved that coil springs were the way to go, and yet leaf springs persist with the competition. IÂ’m not just popping off, here. In the 1990s I used to specialize in pickup truck suspension tuning for the Toyota Technical Center. Leaf springs are crude and loaded with compromises, but thatÂ’s all that truck design engineers ever gave us to work with. I was instantly all-in on RamÂ’s move to rear coils after the first few miles of driving a 2009 Ram 1500 pickup. Empty-bed ride comfort and handling were on another level, but it could still tow and haul. In fact, towing stability proved to be frankly incredible on the normally-treacherous downhill leg of my winding tow test grade. I fully expected everyone would copy it immediately. But they didnÂ’t. Others may have doubted the payload aspects. Ram never did. It soon doubled down and put coils under the back of its 2014 2500-series trucks. IÂ’ve developed other theories that seek to explain why no one followed their lead, but theyÂ’re not worth dredging up because I think the dominoes will soon begin to fall. Spy photos suggest that the next Toyota Tundra will switch to coils, and there are rumors that the Ford Raptor is going that way. ThatÂ’s not much of a stretch because the Ranger Raptor (only available outside the U.S.) already has coil spring rear suspension. WhatÂ’s the big deal? LetÂ’s take a look at the underside of a 2020 Ram 1500 Laramie 4x4, the second iteration of the Ram 1500 to employ coil spring rear suspension.   As it has for some time, the front end of the Ram 1500 rides on double wishbone suspension. The truck employs a high-mount upper wishbone (yellow arrow) that positions the upper ball joint up behind the tire sidewall instead of inside the wheelÂ’s barrel. This layout offers improved steering geometry and reduced stress in the upper ball joint, the upper control arm and its mounting points.   Coil-over spring/shock assemblies (green) come standard on all 2019+ (fifth-generation) Ram 1500 pickups whether they have four-wheel drive or not.

UAW workers in Indiana, Stellantis reach tentative deal to end strike

United Auto Workers union members who went on strike Saturday at the Stellantis casting plant in Indiana have reached a tentative deal with the company. The UAW Local 1166 bargaining committee announced a tentative agreement in a blog post, saying that a ratification vote would be held Monday. Stellantis confirmed the tentative deal Monday. The strike was related to health and safety issues, including the company’s alleged refusal to repair and replace the plantÂ’s air conditioning and heating systems. The 35-acre plant in Kokomo makes parts used in the power trains of Chrysler, Dodge, Jeep and RAM vehicles. The 1,200-worker plant, Kokomo Casting, is the worldÂ’s largest die cast facility, according to Stellantis. In May, Stellantis announced a $2.5 billion joint venture with Samsung to build an electric vehicle battery factory in Kokomo that is to employ 1,400 workers. Stellantis, created last year through the merger of Fiat Chrysler and FranceÂ’s PSA Peugeot, had said it would build two electric vehicle battery factories in North America. The other is slated for Windsor, Ontario. Plants/Manufacturing UAW/Unions Chrysler Dodge Jeep RAM

FCA Drive for Design Ram truck contest winners chosen

Last month, Fiat Chrysler held a 24-hour sketch battle open to anyone in the world willing to design the "wickedest and most outrageous" version of a Ram truck. That flash contest was a sideshow to the main event, FCA's annual Drive for Design competition open to high schoolers in the 10th, 11th, and 12th grades who were this year asked to design a Ram pickup for the future. The automaker's design team judged the entries, led by Ram Truck and Mopar Exterior Design boss Mark Trostle, with outside input from Detroit sculptor Josh Welton. The contest closed on May 1, and the winners have been decided: Job Skandera, a 12th grader from Santa Clara, California took first place with his Ram Magma; Vincent Piaskowski, an 11th grader from Birmingham, Michigan (home of Autoblog's headquarters) earned second place with an electric Ram; third place went to the Ram 1500 Series A by 11th grader Alex David Kirschmann from Auburn Hills, Michigan. Kirschmann clearly has a knack for this since he earned second place in last year's Drive for Design competition. The Ram Magma's name is suggested by the translucent polycarbonate windows that forego traditional tinting for a crystalline red privacy sheen "inspired by volcanic igneous rock." The Magma also showcases multiple light bars stretched across the roof, a UV water purifier system between the cab and bed, and a stove embedded into the tailgate. Thankfully, the feature set includes an adjustable suspension that lowers the cab to mortal levels of ingress. The electric Ram protects its extremities with a lightweight graphene hardcoat, offers side storage outside the bed, more storage under the bed floor, a heavy duty power station tucked into the bed wall, and the sandwiched tailgate can form a two-tier shelf system for organization on the job site. That tailgate gives us some real ideas. The 1500 Series A is Judge Dredd's truck when he leaves his Lawmaster motorcycle at the office. The RamBox storage compartments and retractable tonneau cover would represent sentimental historical touches when he's running errands — and moving everyone out of his way — in Mega-City One. Due to social distancing, the traditional awards ceremony and visit to FCA design HQ to talk with team members had to be canceled.