2011 Ram 3500 4wd Mega Cab 160.5" Slt on 2040-cars

Auto blog

2014 Promaster looks like a Fiat, hauls like a Ram

A new day is dawning, folks. The old-guard vans of our youth are being replaced with a new flock of European-inspired commercial vehicles from the likes of Ford, Nissan (Renault) and Mercedes-Benz. Here in Chicago, Ram pulled the covers off its entry into the reborn commercial van market with the 2014 Promaster, based on the well-known European Fiat Ducato.
Ram makes no bones about the Promaster's Fiat underpinnings, though the company claims it has beefed up the machine for US roads and uses with a re-engineered chassis, a more robust suspension setup, improved brakes (from Brembo), additional corrosion protection, improved climate control and additional safety systems.
Power comes from one of two powerplants options, one gas and one diesel. First up is Chrysler's well-known 3.6-liter Pentastar V6 rated at 280 horsepower and 260 pound-feet of torque mated to a six-speed automatic transmission. For a bit more pulling power and durability, Ram is offering a new 3.0-liter four-cylinder diesel engine pumping out 174 hp and, more importantly, 295 lb-ft of torque at just 1,400 rpm. That engine sends its torquey goodness through a six-speed electronically controlled automated manual gearbox.

2015 Ram Promaster City is ready to take a load off [w/videos]

There are a few segments of the auto industry that are growing rapidly. Weirdly, though, one of the most notable is the compact cargo van market. What use to be the sole terrain of the Ford Transit Connect and the occasional Dodge Grand Caravan-based Ram C/V Tradesman is becoming a notable battleground. Nissan has dove headfirst into the market with its NV200, which will also be sold as a Chevrolet City Express and Ford recently released a heavily redesigned, more user friendly Transit Connect. Now, Ram is releasing its entry into the compact cargo segment.
Like the Transit Connect and NV, the all-new Ram ProMaster City is billed as a diet version of the full-sized workhorse van, the ProMaster. Also like its big brother, the 2015 ProMaster City is based off a commercial offering from Fiat Professional, the Doblò (the full-size ProMaster is based on the Fiat Ducato).
But while the ProMaster gets a pair of six-cylinder engines and a wide array of wheelbase and roof heights, the ProMaster City is simpler. The sole engine choice is the familiar 2.4-liter, Tigershark four-cylinder that's found in the vehicles Fiat Chrysler's compact-wide platform, such as the Chrysler 200, Dodge Dart and Jeep Cherokee. Power output sits at 178 horsepower and 174 pound-feet of torque. According to Ram, the ProMaster City boasts class-leading output and can sprint to 60 in 9.8 seconds. Perhaps knowing that's a ridiculous stat in a cargo van, Ram also cites a more useful 3.7-second run from zero to 30 miles per hour. The Tigershark sends its power through a nine-speed automatic transmission to the front wheels.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric