2024 Ram 2500 Laramie on 2040-cars

Auto blog

2020 Ram 1500's new EcoDiesel horsepower and torque revealed

Following on the reveals of Ford and GM's light-duty diesel full-size pickup truck engines, Ram has finally revealed its second-generation EcoDiesel V6 for the 2020 Ram 1500 and 2019 Ram 1500 Classic. The engine is once again a 3.0-liter V6, but it now makes 260 horsepower and 480 pound-feet of torque. That's an increase of 20 horsepower and 60 pound-feet of torque over the previous engine. Ram notes a number of changes were made to achieve these numbers, including adding a water-cooled variable geometry turbo, reducing compression ratio from 16.5:1 to 16:1, adding lighter pistons, revising the intake ports, and using a new fuel injection system and exhaust gas recirculation system. Those numbers also put the new Ram diesel at the top of its class for torque. Just behind it is the 3.0-liter inline-six in the 2020 Chevy Silverado and GMC Sierra that makes a bit more power at 277 horsepower but less torque at 460 pound-feet. Then there's the 2019 Ford F-150's 3.0-liter V6 that makes 250 horsepower and 440 pound-feet of torque. The Ram engine also hits peak torque at 1,600 rpm, which is sooner than the Ford engine at 1,750 rpm. The Chevy engine's torque arrives even earlier than both at 1,500 rpm. The Ram's maximum towing capacity of 12,560 pounds also tops the F-150 diesel's 11,400 pounds. There are still a number of unknowns regarding the new EcoDiesel engine, though. Ram hasn't announced payload capacity, pricing or fuel economy for the engine. We expect fuel economy will be slightly improved over its predecessor's 20 mpg in the city and 27 on the highway. But we don't know if it will match or surpass the F-150 diesel's 22 mpg in the city and 30 on the highway. All these numbers should be announced closer to the engine's release window of fourth quarter of 2019. The engine will also be available in every single trim and configuration of the 2020 Ram 1500 including the Rebel, which used to be a gas-only trim. The engine will even be available on the 2019 Ram 1500 Classic. This should also be the engine that will soon appear in the Jeep Gladiator and Wrangler.

FCA CEO says the Ram 1500 Classic will live on, might even get an update

Ram intends to keep selling the 1500 Classic pickup truck for an unknown amount of time. According to a report from Motor Trend, FCA CEO Mike Manley during the company’s second-quarter earnings call said there are no plans to discontinue the old truck. Not only this, but Manley also suggested that Ram could give the Classic an update. In case you werenÂ’t familiar with RamÂ’s strategy of selling the 1500 Classic alongside the regular 1500, weÂ’ll lay it out for you: Ram released a completely new 1500 for the 2019 model year. Instead of discontinuing the truck it was selling before the new model, Ram continues to produce it under the 2019 Ram 1500 Classic name. Despite it being a 2019 model year truck, the Classic is the last-generation Ram. This is done so that Ram can offer customers a full-size truck option than is cheaper than the fancy new truck is capable of dipping down to. The 2019 Ram 1500 Classic starts at $29,340, whereas the regular 1500 has a base price of $35,135. If that makes a difference for enough people, then it makes financial sense for the old truck to stick around. However, Ram appears to be considering giving the old truck some new tricks, according to Manley. If that idea comes to fruition, then the Classic will start to look like an even better value proposition than it is today. Ram would have to act quickly, though, as the old truck just accelerates its aging by the day as each new pickup hits the market. Sales of the Classic were certainly an important contributor in the battle with Chevy to takeover the number two spot in the pickup wars. An even more attractive offering for the same low price sounds like a short-term winner to us. If Ram does refresh the 1500 Classic for 2020, donÂ’t expect it to last much longer beyond that model year, though. ItÂ’s already on life support at this point, and the new 1500 feels years ahead of it in every way.

Ram granted patent for in-bed ramp system

Most of the patent filings we report on these days are of a pretty high-tech nature: everything from "humanized" navigation systems to 11-speed transmissions. But cool innovations can be lower-tech and clever, too. At least that's our feeling after seeing some proposed plans from Ram. FCA has filed a patent for a system of built-in ramps recessed inside of a truck bed. While stowable ramps aren't new – Ford offers a similar system for the F-150 ­– the level of integration shown in these diagrams seems to be. Drawings show ramps that run on channels in the bed and tailgate, hinged at the end of the extended gate for a gentle upslope into the cargo area. What's more, the system seems changeable, with two ramps set wide or narrow, or just one centrally mounted. Just the thing for switching from motorcycle-loading season to snowmobile-loading season. A granted patent doesn't always lead to a product brought to market, of course. Issues with cost, durability, and demand all have a lot to say about what makes it from design to showroom. Still, we think the proposed RamRamp (feel free to use that, FCA) shows a ton of promise. Speak up truck owners, is a factory-installed ramp system like the one you see here something you'd pay for on your next vehicle? Get into Comments, below, and let us know. Related Video: Featured Gallery Ram in-bed ramps patent drawings News Source: USPTO via Allpar RAM Truck patent