2022 Ram 2500 Tradesman 4x4 on 2040-cars

Auto blog

Italian coachbuilder wraps a modern-day Citroen van in a retro skin

Italian coachbuilder Caselani resurrected an obscure, often-forgotten model from Citroen's past to offer van buyers an additional retro-styled option. Called Type HG, it's based on the current-generation Citroen Jumpy. One of the French carmaker's best-known vintage vans is the Type H, which was built with only minor changes from 1947 to 1981. It's aged into a sought-after classic that's popular as a food truck and as a camper from Paris to Sydney. Few realize Citroen planned to release a smaller model named Type G which looked almost exactly like the H but used an air-cooled flat-twin engine shared with the 2CV. Several prototypes were made, but the project was canned in favor of the 2CV-based, nine-horsepower AU van released in 1951. It's this little-known prototype that only exists in Citroen's official heritage collection and in the minds of the most indoctrinated French car enthusiasts that Caselani chose to bring into the 21st century. And, because the Type G (shown below) was a shrunken copy of the Type H from a design standpoint, making a body kit that fits the Citroen Jumpy was relatively simple. Caselani liberally borrowed styling cues from its modern version of the Type H, which is based on the larger Citroen Jumper sold as the Ram ProMaster in the United States. It adds a new-look front end with a vertical grille, chromed chevrons, and round headlights positioned as far out of the body as regulations permit, corrugated body panels, and a redesigned rear end. Whitewall tires are optionally available. Caselani offers the Type HG as a passenger van, a crew-cab van, and a panel van. Pricing starts at 29,400 euros before taxes are factored in, a sum that represents about $35,000 and that corresponds to a short-wheelbase panel model powered by a 100-horsepower, four-cylinder turbodiesel engine. Alternatively, motorists who already own a Jumpy can purchase the transformation kit on its own for 14,800 euros (about $17,500). For added peace of mind, Caselani pointed out the conversion was created with Citroen's input, and the brand authorized the kit. We know what you're thinking: what on earth is a Jumpy? Glad you asked! It's a van positioned in the middle of Citroen's commercial range. It slots between the Berlingo, which competes in the same segment as the Ford Transit Connect, and the Jumper, which is marketed as an alternative to the Ford Transit.

Ram wants its midsize truck situation 'fixed soon'

The rumors of a midsize Ram pickup are like a metronome — sometimes in motion, sometimes dead. This week the rumor is alive, so reports Automotive News. Fiat Chrysler CEO Mike Manley admitted during an earnings call that the lack of a mid-sizer is "a clear hole in our portfolio," and that the Ram product development team is "focused on it." Puzzling that out means finding "a cost-effective platform in a region where we can build it with low cost and it still being applicable in the market." But he wants a solution found soon. During the product roadmap presentation FCA made in June last year, late CEO Sergio Marchionne said the middling pickup would be built in Mexico. That tidbit came after years of Marchionne saying the brand would get in the segment, only to have the idea shot down by Ram bosses. At the 2012 Detroit Auto Show, a year after the midsize Dodge Dakota went off the market, Marchionne said the brand would reinstate a new-generation Dakota, with a better-than-50% chance it would be unibody. In 2013, then-Ram president Reid Bigland said the chances were tiny because the numbers didn't add up. The two men got on the same page, in favor of, in 2014. In March 2016, Marchionne said, "I like that space a lot," and "It's a good space to be in." Exactly one month later, then-Ram CEO Bog Hegbloom said the idea was dead because he couldn't make a business case for it. Come early 2018, even Marchionne had joined the naysayers. He told Automobile, "We did not think it was necessary to re-enter that market after our last experience." The snag was, and remains, that a smaller truck has "a cost structure very similar to our Ram 1500. We have not found an economic way to get this done." Four months later, there's a midsize pickup on the product roadmap. Then, at this year's New York Auto Show, Ram Trucks boss Jim Morrison told us Ram had no plans yet for a smaller pickup, although the division continues to look at its options. Last September an Automotive News report forecast the truck to be built in Toledo alongside the Jeep Wrangler and Gladiator pickup. When Car and Driver asked for clarification about Toledo or Mexico, FCA pointed to Marchionne's comments referring to Mexico. It appears that's the angle Manley and his team are still trying to make work. The Saltillo, Mexico, assembly plant now builds Ram's heavy-duty trucks, but observers expect HD production to move to the U.S. to make room for the smaller pickup.

Some Ram truck buyer is about to get the 3 millionth Cummins diesel engine

Dodge made a Cummins-built turbodiesel engine available in one of its trucks for the first time during the 1989 model year. Over three decades and a name change later, the company announced it ordered the 3 millionth engine from Cummins, and it's about to drop it in a truck. The 3 millionth engine is patiently waiting on a pallet until it's needed on the assembly line. Ram noted the oil-burning six will be installed in a 2019 3500 Longhorn Crew Cab Dually, a model built for both towing and cruising. While the firm knows who ordered the truck, it chose not to release the owner's name to maintain an element of surprise. The dealership that sold it is planning to host a celebration, so the buyer will only find out that he or she purchased a piece of Ram and Cummins history when arriving to pick it up. The Longhorn isn't the kind of truck you're likely to see on a construction site. Priced in the vicinity of $60,000, it's an upmarket variant of Ram's tow-it-all Heavy Duty pickup decked out with leather upholstery, an eight-way power-adjustable driver's seat, two rows of heated seats, and an 8.4-inch touchscreen for the infotainment system. The high-output Cummins 6.7-liter six adds $11,795 to its base price, meaning the truck receiving the 3 millionth engine costs around $75,000.  Cummins has made several different engines for Dodge- and Ram-branded trucks since 1988. It crossed the 200-horsepower mark for the first time in 1996, and built its first engine with over 500 pound-feet of torque in 2001. The current Cummins, the variant going into the milestone truck, is a mighty, 6.7-liter straight-six that serves 400 horsepower and 1,000 pound-feet of torque.