2021 Ram 2500 Lone Star Crew Cab 4x4 6'4" Box on 2040-cars

Auto blog

Here are all the vehicles sold by the 12 brands of the Fiat Chrysler PSA merger

Sven Gustafson and Ronan Glon contributed to this report. Whether or not the formal merger between Italian-American automaker Fiat Chrysler and European conglomerate PSA Group means the return of Peugeot to the U.S., one thing’s for certain: The combined company will have a truckload of different brands. Sorting out what the deal means for all of them, including where they are sold and built, and whether and where there is product overlap, will be a key question for the two companies as they formalize the merger over the next 12 to 15 months. So far, both sides have steadfastly insisted that no job cuts or plant closures will result from the tie-up. WeÂ’ll see about that. In the meantime, weÂ’ve compiled an alphabetical list of all the vehicles currently sold in Europe and in North America by the various FCA and PSA brands, along with the years they debuted. We've gone into more detail about the European vehicles you might be less familiar with. The joint empire also has an antique store's worth of heritage-laced models and dormant brands, like Plymouth, Imperial, Simca, and Panhard, and it would have been even bigger had FCA not spun off Ferrari in early 2016. Alfa Romeo A legacy Italian sports car brand with roots in racing, Alfa Romeo has been struggling with declining U.S. sales. Giulia (2015): AlfaÂ’s rear-wheel drive sports sedan competes against German luxury sedans in North America and Europe. 4C (2013): The lightweight mid-engine rear-wheel-drive sports car is being phased out. Stelvio (2016): The Stelvio is a small luxury performance crossover that competes against the likes of the Porsche Macan and BMW X3 and is sold in both Europe and North America. Giulietta (2010): Sold in Europe, this compact hatchback is AlfaÂ’s entry-level model. After initially planning a rear-wheel drive 2020 update, the Giulietta is reportedly being nixed as part of FCAÂ’s latest product plans.   Chrysler Despite lending its name to its parent company, questions abound about the future of this legendary but faded brand, which is not offered in Europe. 300 (2011): Despite rumors of its pending demise, the four-door sedan lives on mostly unchanged for the 2020 model year, at least. Pacifica (2016): The successor to the Town & Country is ChryslerÂ’s bestselling model by a long shot and comes in gas-only and plug-in hybrid versions. Voyager (2019): ChryslerÂ’s newest minivan launches as its entry-level minivan for the 2020 model year.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

2019 Ram 1500 eTorque Drivers' Notes Review | Filling in the gaps

When the 2019 Ram 1500 debuted earlier this year at the 2018 Detroit Auto Show, the biggest news was arguably the addition of the 48-volt mild hybrid system. Dubbed eTorque, the system is standard on V6-equipped models and a $1,450 option on trucks with the 5.7-liter Hemi V8. It's not a hybrid in the traditional sense. Despite Ram's claim that the system adds up to 130 pound-feet of torque on the V8, it only does so for a fraction of a second and doesn't actually change the engine's total output. You'd be hard pressed to notice a difference if you didn't know the system was there. But that's kind of the point. There's been a lot of confusion about what eTorque is and how the system works. Much of that falls on FCA's shoulders. The automaker didn't do a great job of explaining the whole thing, leaving us to work out much of it for ourselves. This isn't meant to boost performance, towing or payload. The Ram eTorque can't run on battery power, so don't expect a Toyota Prius with a bed and wood trim. It's here to make the truck just a little bit more efficient by improving areas where conventional internal-combustion engine's fall short. The eTorque system replaces the engine's alternator with a small, belt-driven electric motor. On the V6, the motor is part of the water pump assembly and driven by that belt; the V8 uses a dedicated belt that's separate from the other accessories. A small battery pack is mounted upright behind the rear seats inside the truck's cabin. There's also a DC-to-DC converter to charge the battery and convert 48 volts down to 12 to power the truck's normal systems. Visually, the only difference between an eTorque-equipped model and a standard one is a small metal box at the top of the engine. There's no badging and the battery pack can't be seen, even with the rear seats folded up. The system is designed to be as seamless and innocuous as possible. The auto start/stop system spins up the engine a little quicker. Shifts from the eight-speed ZF automatic transmission are a little smoother as the eTorque system smooths out and fills in the gaps. It does so for a fraction of a second, but it works its magic often. Big gains in fuel economy have already been made. It's going to take things like Ram's eTorque system to improve internal combustion engines from here on out. Editor-in-Chief Greg Migliore: I'd like to say I noticed a huge difference between the Ram eTorque and the regular Ram, but I didn't. That's how it's supposed to work.