2018 Ram 2500 Tradesman 4x4 on 2040-cars

Auto blog

Recall: The Ram 1500's driveshaft could fall off

Ram is recalling 10,160 pickups built for the 2018 and 2019 model years, because the driveshaft may fall off. That would be bad. The recall involves the previous-generation truck. Specifically, some units of the normal 2018 Ram 1500 and some of the 2019 Ram 1500 Classic. In Ram-speak, "Classic" means the previous-generation truck that's sold alongside the all-new version for 2019. The trucks involved were built in a month-long time period in 2018, and Ram has identified the problematic driveshafts by part number. Apparently, the rear driveshaft may "have an incomplete weld fusion between the tube and tube yoke, which may lead to weld cracking or the driveshaft fracturing," according to the recall documents. This could cause the driveshaft to drop off the vehicle, and cause you to lose drive power (among other hazards involved with a driveshaft falling off a truck). At this point, FCA says it's not aware of any accidents or injuries related to the problem. However, it has seen eight occurrences of the driveshafts breaking, prompting this voluntary safety recall. Ram says that an extra noise or vibration could signal that the driveshaft is on the way out. FCA is going to start notifying owners about the recall in mid-June. When you take your truck in, the dealer will replace your driveshaft with one verified to have complete weld fusion. It will, of course, be free of charge to the owners of the affected vehicles.

FCA CEO says the Ram 1500 Classic will live on, might even get an update

Ram intends to keep selling the 1500 Classic pickup truck for an unknown amount of time. According to a report from Motor Trend, FCA CEO Mike Manley during the company’s second-quarter earnings call said there are no plans to discontinue the old truck. Not only this, but Manley also suggested that Ram could give the Classic an update. In case you werenÂ’t familiar with RamÂ’s strategy of selling the 1500 Classic alongside the regular 1500, weÂ’ll lay it out for you: Ram released a completely new 1500 for the 2019 model year. Instead of discontinuing the truck it was selling before the new model, Ram continues to produce it under the 2019 Ram 1500 Classic name. Despite it being a 2019 model year truck, the Classic is the last-generation Ram. This is done so that Ram can offer customers a full-size truck option than is cheaper than the fancy new truck is capable of dipping down to. The 2019 Ram 1500 Classic starts at $29,340, whereas the regular 1500 has a base price of $35,135. If that makes a difference for enough people, then it makes financial sense for the old truck to stick around. However, Ram appears to be considering giving the old truck some new tricks, according to Manley. If that idea comes to fruition, then the Classic will start to look like an even better value proposition than it is today. Ram would have to act quickly, though, as the old truck just accelerates its aging by the day as each new pickup hits the market. Sales of the Classic were certainly an important contributor in the battle with Chevy to takeover the number two spot in the pickup wars. An even more attractive offering for the same low price sounds like a short-term winner to us. If Ram does refresh the 1500 Classic for 2020, donÂ’t expect it to last much longer beyond that model year, though. ItÂ’s already on life support at this point, and the new 1500 feels years ahead of it in every way.

Ram trucks set for export to Australia, New Zealand

Looking across the Pacific at Australia's car-based utes is always a little exciting because it's a glimpse at a land where models not unlike the classic Chevrolet El Camino survive. Now, the Aussies are about to see how the US builds big trucks thanks to a deal to import the Ram 2500 and 3500 into the country. This new market entry comes about thanks to a deal between Ram and the New Zealand importer of FCA products, and once across the ocean, the trucks are converted to right-hand drive. The automaker has "worked closely with our engineers to produce a vehicle that is as close to an official factory right-hand-drive vehicle as it can be without it having actually run down the factory production line," Clyde Campbell, co-owner of Fiat Chrysler New Zealand," said to Drive. The first batch of pickups is set to go on sale to Kiwis and Aussies in October, but further details about them aren't disclosed yet, including available powertrains and price. Drive estimates the Ram 3500 to retail for over 100,000 Australian dollars ($76,000). The trucks are being aimed at those with heavy loads to haul like industrial companies or people with large horse trailers. These might not be the last two Ram models to make it Down Under, either. According to Drive, the New Zealand importer is working to strike a similar deal to bring the Ram 1500 across the Pacific in the future.