Lifted! 6" Procomp 22" Xd 35" Toyos 5.7l Hemi Leather Navigation Side Steps 3.92 on 2040-cars

Auto blog

2020 Ram 1500 4x4 Suspension Deep Dive

What is taking everyone so long? That’s what I continually ask myself each time yet another all-new full-size pickup comes out with leaf spring rear suspension. Meanwhile, this 2020 Ram 1500 pickup represents a dozen years since coil spring rear suspension debuted when its prior generation was still being called a Dodge Ram 1500. Ford, Chevrolet, Toyota and Nissan introduced full redesigns of their pickups well after Ram proved that coil springs were the way to go, and yet leaf springs persist with the competition. IÂ’m not just popping off, here. In the 1990s I used to specialize in pickup truck suspension tuning for the Toyota Technical Center. Leaf springs are crude and loaded with compromises, but thatÂ’s all that truck design engineers ever gave us to work with. I was instantly all-in on RamÂ’s move to rear coils after the first few miles of driving a 2009 Ram 1500 pickup. Empty-bed ride comfort and handling were on another level, but it could still tow and haul. In fact, towing stability proved to be frankly incredible on the normally-treacherous downhill leg of my winding tow test grade. I fully expected everyone would copy it immediately. But they didnÂ’t. Others may have doubted the payload aspects. Ram never did. It soon doubled down and put coils under the back of its 2014 2500-series trucks. IÂ’ve developed other theories that seek to explain why no one followed their lead, but theyÂ’re not worth dredging up because I think the dominoes will soon begin to fall. Spy photos suggest that the next Toyota Tundra will switch to coils, and there are rumors that the Ford Raptor is going that way. ThatÂ’s not much of a stretch because the Ranger Raptor (only available outside the U.S.) already has coil spring rear suspension. WhatÂ’s the big deal? LetÂ’s take a look at the underside of a 2020 Ram 1500 Laramie 4x4, the second iteration of the Ram 1500 to employ coil spring rear suspension.   As it has for some time, the front end of the Ram 1500 rides on double wishbone suspension. The truck employs a high-mount upper wishbone (yellow arrow) that positions the upper ball joint up behind the tire sidewall instead of inside the wheelÂ’s barrel. This layout offers improved steering geometry and reduced stress in the upper ball joint, the upper control arm and its mounting points.   Coil-over spring/shock assemblies (green) come standard on all 2019+ (fifth-generation) Ram 1500 pickups whether they have four-wheel drive or not.

Ram 1500 to get Pentastar V6 option in top-shelf models

Ram has seen such positive customer feedback from its 3.6-liter Pentastar V6 and TorqueFlight eight-speed automatic transmission in the Ram 1500 that it's bringing the powertrain upmarket, and it's now going to be available in truck's Laramie trim level (Laramie Limited pictured above). The new choice means better fuel economy and lower pricing in one of the 1500's higher-end models.
A Ram 1500 Laramie Quad Cab 4x2 with the 3.6-liter Pentastar and eight-speed automatic will retail for $38,775, plus a $1,195 destination charge. It's a savings of over $1,000 over the trim's current starting price.
Ram says the decision to offer the V6 option was customer driven. "Today's V6 engine is a lot stronger than yesterday," said Nick Cappa of Ram Truck media relations to Autoblog. Cappa notes that dealers have reported buyers returning from test drives who can't believe there are only six cylinders operating underhood.

Ram ramping up MI truck production, does deal with Texas Rangers

Thanks to a host of upgrades at the Warren Truck Assembly Plant in Michgan, Ram Trucks is boosting production of the already strong-selling Ram 1500 to build 28,585 more of them a year. That works out roughly to five more per hour, or an additional 100 per day. The major key to the improvements was redesigning 353 assembly workstations to allow employees complete their tasks more efficiently. According to Ram, the expansion was done to meet growing demand for the pickup.
These kinds of comprehensive changes can't happen over night, obviously. From the end of 2013 through the summer shutdown in August, the Warren Truck plant received automation tweaks in the body shop and upgrades to the color booths in the paint shop.
However, the biggest shift was working with "UAW-represented team leaders and operators" to examine every workstation for efficiency improvements. In that analysis, the company identified and altered over 100 problems that could have caused an injury. What really helped to boost the production rate so significantly was moving about 300 parts, or grouping them into kits for better ergonomics, and eliminating walks to grab tools. Once everything was done, about 63 percent of workers at the factory got updated training.