2024 Ram 1500 Big Horn/lone Star on 2040-cars

Auto blog

2020 Ram 2500 in minimal camouflage reveals lights, grille

The folks at FCA have kept the next-generation Ram Heavy Duty trucks well-covered up to now. Now, we finally get to see an example of the truck with minimal vinyl wrap camouflage, giving us our best look yet at the 2020 Ram 2500. It has a number of design cues taken from Ram 1500, but it has a number of distinct differences. At the front, we have a pretty clear look at the 2500's fascia. The grille shares the same non-crosshair design of the 1500. It's flanked by wide headlights, and there's a chrome line that runs along the tops of the headlights and wraps around the top of the grille. Unlike the 1500, the 2500's grille is much taller, sticking way up above the headlights. It also retains the slightly trapezoidal shape. The headlights also have turn signals that protrude from below. The rest of the truck is still relatively well-covered. One key detail we can make out is the taillights, which appear to be the same as those used on the 2019 Ram 1500 Tradesman. As such, the bed will likely share cues with the 1500, such as the molded belt line low on the bedsides. Past spy photos have also revealed that the 2500 will also share the 1500's sharp interior. We're expecting to hear more about the heavy duty Ram in the next few months. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2020 Ram 2500 View 24 Photos Image Credit: SpiedBilde Spy Photos RAM Truck

2013 Ram 1500

Enough Is Enough. Finally.
Not long ago, the efforts of an automaker to put a six-cylinder engine into a pickup truck went something like this: take the basic bread-and-butter V8, lop two cylinders off one end of the block and call it a day. The resulting engines were generally pretty rough around the edges, and while they were able to churn out reasonable amounts of torque, they generally weren't good at anything else. Instead of being smooth running, they shook and shimmied; in place of a quiet highway jaunt, they operated well outside their low-rpm comfort zones and sent a corresponding racket throughout the cabin. And, instead of returning significantly superior fuel economy over their V8 counterparts, they guzzled gas and spat noxious vapors out their tailpipes.
In other words, the only reason to choose the base V6 engine over an optional V8 was to save money on the initial purchase, and that usually meant you'd be driving home in a stripped-out machine and would be lucky to have power windows, cruise control and air conditioning.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.