2021 Ram 1500 Big Horn on 2040-cars

Auto blog

Prosecutors indict three FCA employees in alleged emissions-cheating case

Federal prosecutors indicted three Fiat Chrysler Automobiles (FCA, now Stellantis) employees as part of an investigation into alleged emissions cheating. Charges unsealed on April 20, 2021, accuse the defendants of helping rig the emissions control system fitted to the 3.0-liter turbodiesel V6 used in some models during the 2010s. Prosecutors claim Emanuele Palma, Sergio Pasini, and Gianluca Sabbioni played a determining role in developing a defeat device that allowed the V6 to obtain certification from the Environmental Protection Agency (EPA) while polluting too much in normal driving conditions. Jeep and Ram began making the engine available in the Grand Cherokee and the 1500, respectively, in 2014, but the charges state plans to game the EPA started in 2011. Palma, Pasini, and Sabbioni knowingly mislead federal regulators, the charges claim; they called it "cycle beating," according to The Detroit News. While the three men were part of FCA's research and development department, they started the project while working for an Italian supplier named VM Motori, which FCA purchased in 2013. Pasini and Sabbioni are each charged with one count of conspiracy to defraud the United States and to violate the Clean Air Act, one count of conspiracy to commit wire fraud, and six counts of violating the Clean Air Act. They could spend several years behind bars if they're found guilty. Both are currently in their home country of Italy. Palma's legal troubles are more serious. He was charged with several counts in September 2019, though four wire fraud charges were dropped in November 2020. He lives in Bloomfield Hills, a city located on the far outskirts of Detroit. Prosecutors claim motorists spent over $4 billion on over 100,000 trucks and SUVs fitted with the non-compliant engine between January 2013 and September 2017. FCA has already agreed to pay $800 million to resolve civil claims from the Justice Department, state officials and customers, though it significantly has not admitted guilt. It stressed that "it did not engage in any deliberate scheme to install defeat devices to cheat emissions tests."

Some 2014-19 Ram ProMasters recalled for shifter cables that could detach

The National Highway Traffic Safety Administration (NHTSA) has issued a recall for hundreds of thousands of 2014-2019 Ram ProMaster vans with a 3.6-liter engine. Campaign No. 20V036000 states that the shifter cables on these vans could disconnect from the transmission, which could lead to a variety of unsafe situations. The new recall comes after Fiat Chrysler Automobiles (FCA) has issued transmission-related recalls for several other brand products in recent years. Jeep and FCA were thrust into the spotlight in 2016, when "Star Trek" actor Anton Yelchin's shocking death was linked to what was deemed an unintuitive shifter design. FCA recalled more than 1 million vehicles with a rocker-style eight-speed ZF shifter, including Jeep Grand Cherokees, Chrysler 300s, and Dodge Chargers. The design was unclear to some, and that confusion lead to dangerous rollaways. In 2017, FCA was back in the news when it announced a transmission recall for 1.8 million Ram trucks that had a faulty interlock that could result in the transmission shifting out of park. And in 2019, FCA announced two more transmission recalls, this time for 320,000 Dodge Darts and 51,788 Fiat 500s, both of which had cable bushings that could degrade due to temperature and moisture.  FCA's unsettling pattern has bled into the new decade, as 222,207 ProMasters have been recalled for an entirely separate transmission issue that could once again lead to a rollaway risk. The NHTSA estimates approximately three percent of these vehicles could have built with a transmission gear shift cable that was kinked during production. According to the recall document, "the vehicle population was determined to include all ProMaster vehicles equipped with a 3.6-liter engine from the beginning of 2014 MY production on April 23, 2013, through September 14, 2019, when the vehicle manufacturing process was revised." If the shift cable separates, the shifter is no longer connected to the transmission. The driver, then, would not be able to shift properly, or the transmission could be in a different position than believed. If the driver thinks the vehicle is parked, but it is actually still in drive or neutral, the vehicle could unintentionally move. As a precautionary measure until the vans are checked and fixed, FCA suggests owners use the parking brake when parking these vehicles. FCA will begin notifying owners on March 13, 2020 and plans to replace the damaged parts free of charge.

Current Ram 1500 sticking around into 2019

Ram is preparing a big redesign of its 1500 pickup truck for 2018, but for fans of the current truck, don't feel like you need to rush out to grab one – it's sticking around until 2019. That's according to Automotive News, whose sources spoke on condition of anonymity. The move allows Ram to take a two-prong approach to truck sales, offering the current model as a low-cost option for fleet users while pushing retail consumers toward the new pickup. The factories that build the 1500 today – Warren, MI, and Saltillo, Mexico – will assemble around 200,000 trucks in 2018 and 65,000 in 2019 before Ram phases out the older model. Meanwhile, FCA's Sterling Heights, MI, plant will screw together 325,000 redesigned 1500s starting in 2018, with production to increase to over 400,000 units in 2019. While Ram refused to comment when AN reached out, FCA CFO Richard Palmer hinted at the move during a conference call last week, saying "having more pickup capacity will allow us also to satisfy the fleet customers' demand on pickup, which we struggle to do today because we favor retail in the U.S. and Canadian volume, which have higher margins." "As we realign our capacity, we're going to be able to continue to work on improving our fleet mix," Palmer said. Beyond making a play for fleet buyers, continuing to build the current 1500 guarantees dealerships maintain a solid inventory as Ram ramps up production of the new truck. You can check out leaked images of the redesigned Ram here. According to Automotive News, the new truck won't use aluminum, like the Ford F-150, relying on steel instead. FCA's 3.6-liter V6 will provide thrust along with turbocharged options, although there's no mention of the venerable 5.7-liter Hemi V8. Don't read too much into that, of course – we'll eat our shoe if the 1500 ditches the popular eight-cylinder. It's still too early to predict when the 2019 Ram 1500 will debut, but it will likely happen in 2018 at the North American International Auto Show in Detroit or perhaps at a non-auto show event. Related Video: