2019 Ram 1500 Rebel Crew Cab 4x4 5'7" Box on 2040-cars

Auto blog

270,000 Ram pickups in ‘salt belt’ recalled to fix sagging fuel tanks

Drive a Ram 1500? Maybe it's time to give your fuel tanks a look. FCA is issuing a voluntary recall of over 270,000 Ram 1500 pickups to prevent their fuel tanks from sagging. A corrosion-related problem, the issue can be identified either visually by looking at the undercarriage, or by listening to any scraping noises, as the brackets for the fuel tanks straps corrode and can cause the tanks to hang low. FCA says in its statement that the recall is limited to 270,254 model year 2009-2012 Ram 1500 pickups that have been registered in states belonging to what is called the "salt belt," that is, the District of Columbia and the following states: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Wisconsin and West Virginia. Some 27,000 trucks will also be recalled in Canada, a thousand in Mexico and some 5,300 others. The tanks themselves are made of high-density polyethylene, and as such do not rust out: The problem is related to their fixings. The tanks won't be detached, as if a bracket fails, the remaining structural components will still hold the tanks. FCA also says no related incidents or injuries have been reported, nor have there been any fires — but the brackets are definitely worth getting fixed. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Ram recalling 65k trucks for rear-axle heat treating

A problem with the rear axle has promoted Fiat Chrysler Automobiles to recall a selection of Ram trucks. The campaign affects 2015-16 Ram 1500 series trucks – specifically those manufactured between June 17 and September 28, 2015. All told, that amounts to over 65,760 units across the United States. The issue stems, according to the statements below, from the rear axle shaft. Some of those trucks may have not had those axle shafts properly heat-treated, which could cause them to fracture and separate from the wheel. And that, it should go without saying, could lead to a crash. FCA states that most of the vehicles in question are in dealer hands, but while the manufacturer says it is aware of one accident to have resulted from the issue, no injuries have been reported. The owners of the affected vehicles will be notified to bring their trucks in to their local dealership to have them inspected. If necessary, the dealership with replace the rear axle assembly. This recall follows three prior (but unrelated) ones, also issued for Ram pickups, that between them affected well over a million units. Related Video: RECALL Subject : Incorrectly Heat Treated Rear Axle Shaft Report Receipt Date: OCT 15, 2015 NHTSA Campaign Number: 15V661000 Component(s): POWER TRAIN Potential Number of Units Affected: 65,760 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Ram 1500 trucks manufactured June 17, 2015, to September 28, 2015. The affected vehicles may have been built with rear axles that were incorrectly heat treated. CONSEQUENCE: If the rear axle shaft was not properly heated treated, it may fracture and a wheel separation could occur, increasing the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the vehicles and replace the axle assemblies, as necessary, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R59. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. ### Statement: Heat-treating October 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 65,760 U.S.-market trucks – most of which are in dealer hands – to inspect and replace, as required, their rear axle shafts or rear axles.

Ram Power Wagon Mojave Sand limited edition has true grit

Just last week Ram informed us of the red and blue Harvest Edition chassis cab trucks that match Case IH and New Holland hardware, and now there's a new color theme edition available. We last saw Ram's Mojave Sand hue on the 2017 Ram Rebel truck, shown to the public at the 2016 Los Angeles Auto Show, but now the color debuts on a Ram Heavy Duty truck for the first time. Ram is introducing a limited, 1,500-unit Mojave Sand edition of the 2018 Power Wagon. The limited edition has contrasting black details and graphics, giving it a nice desert-style look; you won't mistake it with a similarly colored Ram Rebel as the truck proudly proclaims POWER WAGON on the cabin end of the bed — not to mention it rides quite a bit higher. The all-black wheels are also new, shod with 33-inch Goodyears, and the interior is fully black, with features from the Heavy Duty Luxury Group like LED bed lighting and an overhead console. But the Power Wagon is much more than just add-ons: Underneath, it's a 2500 HD 4x4 Crew Cab with the 6.4-liter Hemi V8 providing 410 horsepower. There's a suspension kit offering more than two inches of lift, giving the truck a total of 14.3 inches of ground clearance. As well as an electrically disconnecting front sway bar, there are locking diffs front and rear and a 12,000-pound winch — it's like you're factory-instructed to go deep into Mojave Desert sand and then power your way out of it. The Mojave Sand package is a $795 bump to the standard Power Wagon, meaning the list price starts at over $55,000 including destination fees. The limited edition will be available during the fourth quarter of 2018. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2018 Ram Power Wagon Mojave Sand Edition Image Credit: Ram Trucks RAM Truck Off-Road Vehicles ram power wagon