2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

2020 Ram Heavy Duty Limited Black Edition answers the call of the void

Ram buyers overcome by the lure of the Sith or the call of the void when configuring their pickups have had a variety of ways to go dark on their trucks, from 1500 to the heavy duty line. Now the 2020 Ram 2500 and 3500 HD's top Limited trim is getting access to all the darkness possible with the Black Edition, creating a truck that says "lights out" in about six different ways. The package blacks out the heavy duty rigs entirely, starting with the black grille with black RAM lettering, black bumpers front and back, black tow hooks, black door handles, black side-view trailer tow mirrors, black bezels around the LED headlights and taillights, dark-tinted taillights, and matte badges. Any colored lenses, such as the clearance lights above the cab, are clear. Because on the Ram Heavy Duty Black Edition, black means black. The Black Edition can be optioned on the Ram 2500 or 3500 in 4x2 or 4x4, in single- or dual-rear-wheel trims. When outfitted with single wheels in back, the Black Edition sits on 20-inch black wheels. When dual wheels hang off the back axle, buyers will find 17-inch black wheels with machined eyelets. Engine choices are the regular trio of 6.4-liter Hemi V8 with 410 horsepower and 429 pound-feet of torque, the normal 6.7-liter Cummins straight-six diesel making 370 hp and 850 lb-ft, or a high-output version of the 6.7-liter restricted to the 3500 that puts out 400 hp and 1,000 lb-ft. The three-quarter- and one-ton darkness rolls into dealerships in a few months starting at $64,440 for the Ram 2500 2,745 after a $1,695 destination charge. That's a $1,095 premium over the standard Limited Trim. Assuming the same premium for the Ram 3500 Black Edition means a starting price of $65,790. Related Video:    

Analysts wary over FCA lawsuit but say emissions not as bad as VW

MILAN - Any potential fines Fiat Chrysler (FCA) may need to pay to settle a US civil lawsuit over diesel emissions will unlikely top $1 billion, analysts said, adding the case appeared less serious than at larger rival Volkswagen. The US government filed a civil lawsuit on Tuesday accusing FCA of illegally using software to bypass emission controls in 104,000 vehicles sold since 2014, which it said led to higher than allowable levels of nitrogen oxide (NOx) that are blamed for respiratory illnesses. FCA's shares dropped 16 percent in January when the U.S. Environmental Protection Agency (EPA) first raised the accusations, adding the carmaker could face a maximum fine of about $4.6 billion. The stock has been under pressure since. Volkswagen agreed to spend up to $25 billion in the United States to address claims from owners, environmental regulators, U.S. states and dealers. FCA, which sits on net debt of 5.1 billion euros ($5.70 billion), lacks VW's cash pile but analysts said its case looked much less severe. While VW admitted to intentionally cheating, Fiat Chrysler denies any wrongdoing. Authorities will have to prove that FCA's software constitutes a so-called "defeat device" and that it was fitted in the vehicles purposefully to bypass emission controls. Even if found guilty, the number of FCA vehicles targeted by the lawsuit is less than a fifth of those in the VW case. Applying calculations used in the German settlement, analysts estimate potential civil and criminal charges for Fiat Chrysler of around $800 million at most. Barclays has already cut its target price on the stock to take such a figure into account. Analysts also noted that FCA's vehicles are equipped with selective catalytic reduction (SCR) systems for cutting NOx emissions, so it is likely that any problem could be fixed through a software update. "Should this be the case, we estimate a total cost per vehicle of not more than around $100, i.e. around $10 million in aggregate," Evercore ISI analyst George Galliers said in a note. The estimates exclude any additional investments FCA may be asked to make in zero emissions vehicles infrastructure and awareness as was the case with VW. FCA said last week it would update the software in the vehicles in question, hoping it would alleviate the regulators' concern, but analysts said it may have been too little too late. The carmaker is also facing accusations over its diesel emissions in Europe.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.