2014 Ram 1500 Tradesman/express on 2040-cars

Auto blog

Marchionne: Midsize pickup still not in the cards; Ram 1500, Jeep Wrangler could use aluminum

During the Fiat-Chrysler briefings on Tuesday, Reid Bigland, head of Ram Trucks, outlined the new product plans for his brand, including confirmation that an all-new light-duty Ram 1500 will launch in 2017. From there, discussions spun off in two directions, with the main questions being: will Ram build a midsize pickup? And, following Ford's move to extensively use aluminum in its new 2015 F-150, will Chrysler be using this weight-saving material for the next round of its fullsize truck, as well?
"I think there is room for a Ram 1000," Fiat-Chrysler CEO Sergio Marchionne (pictured above) told members of the media, saying this is a conversation the automaker has been having internally for several years now. "We've tried this ... we've actually taken it to clinics," Marchionne stated, adding that the "response has been lukewarm."
"I have better use of aluminum in this house than a pickup truck." - Sergio Marchionne

2019 Ram 1500 V8 First Drive Review | New pickup has more of everything

SCOTTSDALE, Ariz. – There's a lot going on with the 2019 Ram 1500: inside, outside, out back, and under the hood. New engine options — two of which feature 48-volt eTorque assistance for extra grunt — and lots of attitude-heavy trims. But our first experience with the '19 Ram is focused on the totality of the truck experience — taking a step back, a deep breath of desert air, and soaking it all in. Ram is staking out a fascinating niche in an incredibly competitive segment. More than anything, this is a very comfortable truck, and that's exactly what it needs to be. Remember, Ram ditched leaf springs for coil springs 10 years ago, figuring a smoother ride outweighed the cost. That didn't make it less truckish, since capabilities also increased. And the same goes here: The suspension geometry is tweaked even further, giving it better control over speed bumps in the Phoenix suburbs as well as the desert washes, guarded by saguaro sentinels. Lest you think this means the 1500 gives up anything on its predecessor, properly equipped the '19 can tow up to 12,700 pounds. Yes, with the 1500 ... not a dual-axle, heavier-grade 3500 or something. Maximum payload is up to 2,320 pounds, too — although that rating is only for a 3.6L 4x2 with a 3.55 rear end. There's got to be a tradeoff, right? Maybe Ram pinched the interior to save weight. Nope — both the Quad and Crew cabs are bigger. The Crew Cab grows more, though, with 4 extra inches of extra wheelbase finding its way into the massive space behind the front seats — there's 45.2 inches of legroom back there, which is about 5 inches more than before. This process of critically assessing the Ram, looking for clues that something was worse or amiss, simply came up empty. The only area the 1500 seems to show weakness is in pricing — generally it's more expensive across the board, by a few hundred dollars, although some of that is offset by favorable options packaging or additional content. And, of course, with increased complexity there's the potential for higher running costs down the road — something we can't evaluate until these trucks have been on the road for years. Back to the present: The conclusion we came to is that Ram simply invested in multiple areas in this truck. A bit of the cost is passed onto the buyer, but not as much as you'd think. To translate from beancounter: Pay a little bit more, get a lot more.

China own a Detroit automaker? Would the U.S. let that happen?

The news that several Chinese automakers want to buy Fiat Chrysler Automobiles, and that one has even made an offer, elicits some mixed feelings. On one hand, as some have pointed out, it could be a win-win both for China and for FCA's American workers, ensuring the company's survival and opening new markets. On the other hand, this is China, whose trade relationship with the U.S. is the source of considerable scrutiny from the Trump administration — and whose not-a-friend, not-an-enemy status is particularly difficult to gauge right now during heightened tensions with its client state North Korea. So would such a deal pass regulatory muster? One reason that springs to mind for blocking any sale has to do with national security. Chrysler's role as a military supplier dates back to Dodge trucks used by Gen. Blackjack Pershing to chase Pancho Villa in Mexico, and shortly thereafter by American forces in World War I. The Detroit Three automakers were, of course, mainstays of the Arsenal of Democracy of World War II. Even before U.S. entry into the war in December 1941, America's industrial machinery went into overdrive, and Chrysler was one of the biggest cogs. It engineered and built the M3, Sherman and Pershing tanks and trucks for Gen. George Patton's Redball Express. It helped develop a radar-guided antiaircraft gun that knocked German bombers and V1 rockets out of the sky — on one day, shooting down 97 of 101 V1s headed for London. On D-Day, the radar system helped thwart Luftwaffe counterattacks on the beaches of Normandy, and it later helped Allied forces break out at the Battle of the Bulge. Chrysler redesigned the Wright Cyclone engines used by the Boeing B-29 Superfortress, the plane that firebombed Tokyo and dropped the atomic bombs that ended the war. Chrysler even played a secret role refining uranium in Oak Ridge, Tenn., that was used in the Hiroshima bomb and in the ensuing Cold War arms race. It worked on military missiles and was NASA's prime contractor for the Saturn V rocket that put men on the moon. More recently, Chrysler produced the M1 Abrams tank. And of course Chrysler is the keeper of the flame for Jeep, a 75-plus-years military legacy handed down from Bantam and Willys to Kaiser to AMC to Chrysler. The point of this history lesson is to note that in times of war or national emergency, America's industrial might has been called to serve, and may well be called on again.