2013 Ram 1500 Tradesman on 2040-cars

Auto blog

A beginner's guide to plowing snow with a heavy-duty truck

I live in a desert, so the only things getting plowed around here are mud flows and brewer neighbors. But I enjoy machinery and haven't plowed any snow since a "loaded" truck meant one with A/C and a CD player, so I jumped at the chance for a plow primer in a Ram HD on a Canadian airfield. Running a plow is like welding – the basics come quickly but experience pays dividends. The first thing to deal with is a frequently changing horizon because, stout as they are, even three-quarter-ton heavy-duty trucks will move up and down in front considerably with a 600-to-800-pound plow hanging off, and fast plow hydraulics rival some low-riders for bounce effect. Getting going is easy unless you forgot blocks and the plow froze to the ground, rookie. If you have to drive to your plowing assignment, blade height needs some experimentation to find the best cooling airflow; if you think sub-freezing temperatures negate that concern, remember you've installed what amounts to a 20-square-foot air brake up front that the truck has to overcome, and blowing snow could block some cooling air passages. Whether it's a "straight" blade or V design, always have it tilted to the right lest you catch a hidden post, solid mailbox, or edge of a snow bank. Most plow operators I spoke to rarely exceed 45 mph in transit because of cooling, front suspension travel, and common sense, and you should go even slower if you don't have some ballast like chains, extra fuel tanks, or a salt spreader to balance the load on the back. With trucks' relatively slow steering and all that weight up high, oversteer is best avoided. With a little clean space to get a run, stick it in Drive to gather momentum and lower the plow simultaneously to float, where the weight of the plow rests on and lets it run along the surface. Momentum is good until you hit something you didn't know about, at which point the plow's breakaway systems limit damage but your truck could still hit something big; caution never hurts. Start out at 10 to 15 mph, depending on consistency and depth, making a clean wave off one side. If you have to push it straight, as you slow coincidentally raise the blade at the bottom of the pile to shove it up higher. Carry too much speed here and you'll stop with an unceremonious thud. Common mistakes cited among a few experts were people pushing banks of snow rather than plowing it, and rushing the shift between Drive and Reverse, throttling up before the shift is completed.

GM being sued over imploding Bosch fuel pumps in Duramax diesel trucks

Texas-based law firm Hilliard Martinez Gonzalez (HMG) this week filed a class-action lawsuit against General Motors over an alleged issue with Bosch CP4 fuel pumps. The suit claims Bosch designed the CP4 pump to work with European diesel fuel, which is thicker than U.S. diesel. When GM installed that pump in the 6.6-liter Duramax engine used from the 2011 to 2016 model years, the lawsuit claims the thinner U.S. fuel didn't provide enough lubrication, allowing air pockets to form in the fuel pump. That, in turn, allegedly let metal rub against metal inside the pump, causing the pump to eventually disintegrate and "send thousands of metal shards into the fuel injection system and every part of the engine." The Detroit News reported on the most recent lawsuit filed in Michigan's Eastern District Court, but the case is another piece of nationwide legal maneuvering going on since at least last September. Every U.S. truck maker used the Bosch CP4 fuel pump, and HMG originally went after all of them, as well as Bosch. On September 30, 2018, HMG filed a class-action suit in Texas on behalf of eight plaintiffs. The law firm wanted to prosecute the affair under RICO — the Racketeer Influenced and Corrupt Organizations Act — and named 10 defendants: FCA US LLC, FCA North America Holdings, LLC, F/K/A Chrysler Group, Fiat Chrysler Automobiles, N.V., Ford Motor Company, General Motors LLC, Robert Bosch GmbH, Robert Bosch LLC, VM North America, Inc., and VM Motori S.P.A.  The firm filed another suit in Florida on Nov. 2, 2018, against the same 10 defendants, again under the RICO statute, this time on behalf of more than 30 plaintiffs. We don't know how many other suits might have been filed, but the two suits mentioned apparently didn't have legs — the courts dismissed both quickly. So HMG shifted its strategy away from the RICO angle, and focused its efforts on GM, filing suit in California on Nov. 20, 2018. Instead of trying to catch 10 fish with a small net, HMG wants to score one fish with a big net. The results have borne more promise for the plaintiffs. In July this year, a judge in California denied GM's motion to dismiss, noting "the alleged defect is central to the vehicleÂ’s function." This latest suit filed on Aug. 6 in Detroit singles out GM again.  The Bosch CP4 is known to be problematic, however.

SEMA 2017 and the new Jeep Wrangler | Autoblog Video Podcast #532

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Associate Editor Reese Counts. We'll talk about the news and hot, modified cars from the 2017 SEMA show in Las Vegas. We'll discuss the new Jeep Wrangler, which was just reveal ahead of the L.A. Auto Show, and the Ram 1500 we have in our fleet. As always, we'll help a listener pick their next vehicle in our "Spend My Money" segment. Autoblog Podcast #532 Your browser does not support the audio element. Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown SEMA Jeep Grand Cherokee Trackhawk and Ram 1500 Laramie Longhorn Southfork Question of the week: What's the best full-size truck? Best cars from Stranger Things Spend my money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Aftermarket Podcasts SEMA Show Jeep RAM Truck SUV Off-Road Vehicles Videos SEMA 2017