2012 Ram 1500 4wd Crew 10th Anniversary Lone Star Deep Cherry Pearl Lifted 6" on 2040-cars

Auto blog

More Ram trucks recalled over tailgate issue

Almost a year ago Fiat Chrysler recalled roughly 1.6 million Ram trucks over an issue with the locking power tailgate. The actuator limiter tab for the power locking mechanism could fracture, which would permit the actuator's lock-rod control to move beyond its limits. That would pull the locking rods open, thereby allowing the tailgate to open at any time. The 2018 recall covered Ram 1500, 2500, and 3500 pickups from the 2015 to 2017 model years, with the five-foot-seven and six-foot-four beds and the power locking tailgate option. Trucks with eight-foot beds, and those with manual-locking tailgates, were excluded. The trucks with eight-foot beds have been added to the recall as of earlier this month, putting 410,351 more trucks in the pool. According to Consumer Reports, Ram redesigned the locking assembly on the other two shorter bed sizes for trucks built after August 2, 2017, which was the end of the 2017 model year. But the eight-foot long-bed trucks didn't get the redesigned part until April 2, 2018 for some reason, making all eight-foot-bed pickups from the 2015 model year to April 1, 2018 part of the recall equation. FCA says it's not aware of any accidents or injuries because of the issue. The company plans to notify owners on June 28. The paperwork filed with the National Highway Traffic Safety Administration doesn't advise owners to stop driving the trucks, but nor does it instruct owners on how to address the problem in the meantime. Sounds like bungee cords might be the go. The fix is estimated to take 30 minutes at the dealer and entails removing the tailgate cover and installing a stop block to prevent the locking actuator's pivot arm from traveling too far. FCA says it will reimburse owners for any other repairs made to address the problem. Meanwhile, owners can contact Fiat Chrysler Automobiles customer service at 800-853-1403, and refer to FCA's number for this recall, V44. The NHTSA campaign number is 19V-347. Last year's recall comes under FCA number U74, and NHTSA campaign number 18V-486. Ram's not alone on this field. The NHTSA continues to investigate the 2017 Ford Super Duty pickups for a similar issue.

2019 Ram 1500 spotted with split tailgate

A little over three years ago, we discovered a patent from Fiat-Chrysler that showed a pickup truck tailgate that not only dropped down like a normal one, but was also split into two swing-out halves. It appears to be a reality now, since one of the Ram 1500 prototypes shown above has just such a tailgate. The tailgate above does look a bit different from the one shown in the patent drawings. For one thing, it's not a 50/50 split in the middle. Instead, Ram seems to have opted for something like a 60/40, or maybe 70/30 split. We're not sure exactly why this is, but there could be a few advantages. For one, It probably allows for the use of the same or nearly the same handle as on conventional Rams, as well as the same badging. For another, if the tailgate operates as described in the patent, it might be possible to open just one side without opening the other, and having the shorter piece could offer some flexibility in tight areas where a larger half couldn't open fully. Testing alongside the split tailgate truck were some other Ram 1500s that had their tailgates completely covered. They did reveal some other cargo management features that should show up on the production truck, such as a return of the RamBox bedside storage compartments. One of the trucks also revealed some ribbed bedsides that would allow the positioning of a cargo divider just about anywhere in the bed. We expect to see the new Ram 1500 to be fully revealed at the Detroit Auto Show in January. In the meantime, you can check out what we believe the production truck will look like, as well as everything we know about it, here. Related Video:

The 2019 Ram 1500 will wear a brand-new face

A day after a dealer meeting leak gave us a look at the 2018 Jeep Wrangler JL and 2019 Jeep Grand Wagoneer, we now have this, our first look at the 2019 Ram 1500. The renderings, which come from a printout titled "Ram Brand Lit Signatures" on the wall of a dealer meeting, gives us a clear look at the next-gen truck's front and rear fascias. At the front, the 2019 1500, codenamed DT, gets a more modern, sophisticated look with a refined grille that boasts a massive vertical bar and a skinner horizontal slot. The headlights are slimmer than the current model's square-like units and feature modern LED lamps. The lower end of the front fascia also has slim lighting elements that could be used for fog lights, along with an off-colored skid plate. The hood continues to sport the same bulge as the current model's, but is shaped like a pyramid instead of a massive rectangle. It looks like Ram took a page out of Ford's design book at the back with a rugged design that imitates the 2017 F-150. The taillights, while retaining the same overall shape, have an unlit section that would most likely be used for the reverse lights and turn signals. With the front end benefiting from LED lamps, the rear taillights would probably get LED units, as well. With Ram still testing new configurations of the 1500 and a document revealing FCA's future products, we expect the next-gen 1500 to come out in the near future as a 2019 model year. Related Video: Featured Gallery 2019 Ram 1500 Dealer Leak Spy Shots Image Credit: KGP Photography Design/Style Spy Photos RAM Truck rendering