on 2040-cars

Auto blog

Porsche CEO outlines Cayenne diesel US repair proposal

Porsche has announced a plan to fix the emissions issue on the Cayenne with the 3.0-liter diesel V6, and it includes a software update and the replacement of the catalytic converter on some early examples, according to Reuters. The company believes these repairs are enough to make the SUVs emissions compliant, but the automaker's proposal still needs approval from the Environmental Protection Agency and California Air Resources Board before it can implement a recall. This authorization could come by the end of January. Note that the proposed 3.0-liter TDI plan is separate from the 2.0-liter TDI fix that was rejected by CARB on Tuesday. There are around 13,000 Cayennes on the road that the company needs to repair. Models from 2013 and 2014 would require a new catalytic converter and a software update, but those from 2015 and 2016 would just need the new software. "The technical aspects have all been submitted, we will wait whether there will still be proposals for corrections by the Americans," Porsche CEO Oliver Blume said to Reuters. He wasn't sure how long the repair process would take, but suggested less than half of the affected examples would require the upgraded exhaust hardware. Blume indicated to Reuters that Audi actually created this repair plan. The EPA first issued a violation notice against the 3.0 TDI in early November and later broadened it to around 85,000 vehicles from the 2009-2016 model years, including diesel examples of the Cayenne, Volkswagen Touareg, Audi A6, A7, A8, Q5, and Q7. Audi later admitted the engine contained previously undisclosed auxiliary emission control devices. CARB gave the automaker 45 days to come up with a recall proposal to fix the 15,000 affected models in the state. Related Video:

Porsche 911 RSR in bizarre, terrifying rally crash

As far as rally crashes go, this one is pretty terrifying. At this month's Hellendoorn Rally, Harry Kleinjan failed to negotiate a turn and drove his Porsche 911 RSR straight into a Jersey barrier, flipping the car into the river.
While it's unclear what caused the accident, German Car Scene notes, "We can see his brakes locking up ahead of the impact, which also ripped both driver's side wheels off, so it may be a case of ill-judged late braking, locking brakes or a jammed throttle." Us? We're betting it might have been bad pace notes. Fortunately for Harry and his co-driver, all indications are that no one was hurt. Check out the videos below to see the spectacular crash for yourself.

Porsche reveals new 911 GT3 R at the Nurburgring

On any given weekend, you're bound to find gaggles of Porsche 911s zipping around most any race track. Now Porsche has revealed its latest competition model at no less fitting a location than the Nurburgring. The new 911 GT3 R replaces the existing version, slotting in below the 911 RSR. It's based closely on the road-going 911 GT3 RS, and retains the same 4.0-liter naturally aspirated flat-six with direct injection and variable valve timing, but tuned to deliver over 500 horsepower, transmitted to the rear wheels through a six-speed sequential paddle-shift gearbox and mechanical limited slip differential. The wheelbase has been stretched over three inches for better weight balance compared to the outgoing GT3 R, further optimized by more lightweight components and a central radiator to lower the center of gravity. The lightweight bodywork is made of aluminum, steel, and carbon fiber, and for the first time all of the glass (including the windscreen) has been replaced by plexi. Stopping power is provided by six-piston aluminum monoblock calipers gripping 380-millimeter steel discs up front, with four-piston calipers and 372-mm discs at the back. The safety fuel cell can now hold 120 liters of fuel with a cut-off safety valve, the doors and windows can be removed, and the escape hatch is bigger, too. All of this adds up to the promise of a more competitive GT3 R ready to take on the competition, available to privateer racing teams from December for 429,000 euros before tax – working out to about $487k at current exchange rates. World premiere at the Nurburgring Lighter, more economical, faster: the new 911 GT3 R Stuttgart. Based on the 911 GT3 RS production sports car, Porsche has designed a customer sport race car for GT3 series around the world: The 911 GT3 R. In developing the more than 368 kW (500 hp) racing nine-eleven, special attention was paid to lightweight design, better aerodynamic efficiency, reducing consumption, improved handling, further optimised safety as well as lowering service and spare parts costs. Adopted from its production sibling, the 911 GT3 R features the distinctive double-bubble roof, and the wheelbase which had been lengthened by 8.3 centimetres compared to the previous generation. This ensures a more balanced weight distribution and more predictable handling particularly in fast corners corners in comparison to the previous GT3 R.