2010 Porsche Cayenne Turbo One Owner California Suv With 17k Miles--loaded on 2040-cars

Auto blog

Exclusive: The first Porsche 911 Targa restored by Singer

We love Singer. Frankly, if you're a Porsche guy, or just a car guy, and have seen any of the Porsche 911s that have been restored and "reimagined" by the Californian company, you probably do too. So you can imagine our excitement in getting an exclusive first full look at the latest Porsche 911 restored by Singer. The car you seen in the photographs above is a special thing beyond the obsessive Singer restoration treatment. It's the first Targa the company has ever restored. Plus, this car is one of the first with a modified 4.0-liter flat-six, making around 390 horsepower and 315 pound-feet of torque. With a body clad mostly in carbon fiber, the ultra-lightweight Targa is as modern under the skin as it is retro to the casual observer. The liquid-pewter beauty makes its debutant turn tomorrow at the Goodwood Festival of Speed. We sat down with Singer founder, Rob Dickinson, to pick his brain about the new Targa, where his love of Porsches started, and about the punk-rock car company he's building in SoCal. Autoblog: Tell us a little bit about the car. It's a 911 Targa, obviously, but tell us about what's special beyond that. Rob Dickinson: This is the first time one of our clients has requested that we restore his Targa rather than his coupe and so we did. We always had hopes that we could get our fingers on a Targa and it's the first of a few that are coming down the line now, such that you'll see the second one at Pebble Beach in August. It's basically a faithful rendition of the work that we do on the coupes. The Targa presents us with new challenges, but also an opportunity to add our jewelry to the car. Obviously, that iconic Targa hoop – that was rendered in stainless steel on the original 911s in '65 – we now render that in nickel, which is I guess part of our calling card, our signature. All the brightwork we do on the coupes is in nickel and we're following that principle with the Targas as well. Just for the sake of injecting a little bit of uniqueness into the Targa hoop, we render it with two cool, air-filtering louvers, rather than three, which the early 911 had. Which we thought was a cute little touch that is somewhat different from the early 911s and very different from the later 964, which didn't have any louvers in it at all. AB: That's Porsche nerdiness in the extreme. In a good way. RD: Thank you, yeah. It's one of those things that won't be noticed by many but will be noticed by a few, and that's an insider's thing.

Modded budget Mazda Miata takes on new Porsche Boxster in more challenges

Earlier this month, our friends across the pond at Auto Express released the first in a two-video series that would see them try and build up a second-generation Mazda MX-5 Miata that could best a standard Porsche Boxster around the track. While that first video detailed the mods to the MX-5 - a supercharger, some suspension upgrades and a new set of super-sticky rubber being chief among them - and set baseline lap times for the stock car, today, we have the results of the 5,000-pound ($8,200) upgrade job.
Of course, we aren't going to spoil those for you. You'll need to watch the full video, which recaps the upgrades before digging into a comparison of both straight-line-speed differences between the 2.7-liter Porsche Boxster and blown Miata, as well as their behavior and lap times on the track.
Take a look and let us know what you think in Comments.

Porsche calling in two Cayennes

We regularly see recalls addressing all manner of problems (or potential problems) affecting any number of vehicles: hundreds, thousands, even millions. Some are too small to bother reporting, but once in a while one comes along that's so ridiculously small that we couldn't pass it over. Like this latest one from Porsche. "Due to a manufacturing error," says the National Highway Traffic Safety Administration in the notice below, "the suspension alignment on the front and rear axles may not have been performed correctly and the screw connections of the camber, toe and caster may not have been tightened with the specified torque." The recall affects the 2015 Cayenne... but just how many of them, you ask? Two. Not two hundred, not two thousand, but two: one Cayenne Diesel and one Cayenne S, manufactured between November 26 and... November 27, 2014. That very well might make this the most methodically German recall in the history of recalls. If you happen to be the owner of one of those two vehicles, expect to hear from Porsche with instructions to bring your Cayenne in to have the suspension re-aligned and the screws tightened. RECALL Subject : Front and Rear Alignment may be Incorrect Report Receipt Date: DEC 29, 2014 NHTSA Campaign Number: 14V824000 Component(s): SUSPENSION Potential Number of Units Affected: 2 Manufacturer: Porsche Cars North America, Inc. SUMMARY: Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2015 Cayenne Diesel and Cayenne S vehicles manufactured November 26, 2014, to November 27, 2014. Due to a manufacturing error, the suspension alignment on the front and rear axles may not have been performed correctly and the screw connections of the camber, toe and caster may not have been tightened with the specified torque. CONSEQUENCE: If the suspension alignment was incorrectly performed, vehicle handling could be reduced, increasing the risk of a crash. REMEDY: Porsche will notify owners, and dealers will perform a front and rear suspension alignment, and check the screw connections for the proper torque, retightening as necessary, free of charge. The manufacturer has not yet provided a notification date. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AF04. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.