1970 Pontiac Lemans 455 on 2040-cars

Auto blog

'67 Chevy Corvair convertible vs. '86 Pontiac Fiero in cult classic showdown

Every few a decades, the folks running General Motors lose their minds briefly try to market a car that public doesn't see coming and often aren't ready for. In the '60s there was the rear-engine, air-cooled Chevrolet Corvair, then the mid-engine Pontiac Fiero in the '80s and the completely bizarre Chevy SSR in the 2000s. What all of these had in common was that they bucked the trend for American models of their era, for better or worse. The latest episode of Generation Gap tasked the hosts with finding two cult classic vehicles to choose between; they came come up with two of these quirky products from The General.
On the classic side, there's a 1967 Chevy Corvair Monza convertible. Being from later in the production run, it wears slightly more aerodynamic styling than the earlier, boxier examples. Hanging out back is an air-cooled, 2.7-liter flat-six pumping out a robust 95 horsepower. In the other corner is the somewhat more modern 1986 Pontiac Fiero SE with a mid-mounted, 2.5-liter "Iron Duke" four-cylinder, an engine nearly ubiquitous in GM cars of the '80s.
Judging by when they were new, the Corvair was far more successful than the Fiero with over 1.8 million sold. Of course, Ralph Nader's book Unsafe at Any Speed kind of poisoned the well, even if the poor safety reputation wasn't entirely deserved. The Fiero on the other hand only lasted for a few model years before shuffling off, but it eventually got its own performance boost with the V6 version and rather attractive GT models. Check them both out in the video and tell us in Comments which you want in your garage.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

Celebrate the summer solstice by building the Pontiac Solstice shooting brake GM never did

Happy summer solstice, everyone! To celebrate, we have a particularly unusual eBay find connected to the Pontiac Solstice sports car. A seller has leftover inventory of fiberglass hardtops designed to turn the Pontiac Solstice roadster into a shooting brake. The seller says they came from a since-closed Indiana company, and they're clearly inspired by another aftermarket part and even a GM concept that never saw the light of day. We'll start from the beginning: the stillborn Chevy Nomad concept. It was a concept that came out about the same time as the original Solstice concept, and it was clearly based on the same platform, featuring a small two-door body and a long nose. It also had unashamedly retro Nomad wagon design cues and cues from the original Corvette. The car never saw production, but clearly people were interested in having a wagon-like sports car. That brings us to the next bit of history with an aftermarket hardtop developed by German company EDAG. We saw a prototype in person, and the overall shape seemed to fit the car — and the wraparound window design certainly seemed Nomadic. Besides the unique look, the hardtop and its functional hatch made the Solstice roadster's miniscule cargo space far more usable. It doesn't appear many of the tops were sold, though. These tops on eBay look very similar to the EDAG tops, though it's not clear if they're a direct replica or something similar. Being that the parts are leftover inventory, the seller notes that some of the tops may be missing pieces for installation, so only those who are handy with bodywork and fasteners, or who are able to lean on someone who is, need apply. Even with some extra work, if you really want a Solstice shooting brake, this is likely easier and cheaper than commissioning a shop to custom-build a roof for your. If you're interested, check out the link. They're $499.99 apiece, and the seller will also provide a set of seals and gaskets for the top for an extra $125.