2005 Pontiac Grand Prix Base Sedan 4-door 3.8l on 2040-cars

Auto blog

Junkyard Gem: 1980 Pontiac Phoenix LJ Hatchback

The car-building world was rushing headlong into front-wheel-drive by the late 1970s, eager to reap the weight-saving and space-enhancing benefits of front-drive designs. General Motors designed an innovative FWD platform to replace the embarrassingly outdated Chevrolet Nova and its siblings, and that ended up being the Chevrolet Citation. The other US-market GM car divisions (except Cadillac) got a piece of the X-Body action, and the Pontiac version was called the Phoenix. Here's one of those first-year Phoenixes, not doing a very good job of rising from its snow-covered ashes in a Colorado self-service yard. Pontiac had used the Phoenix name on a luxed-up iteration of Pontiac's version of the Chevy Nova during the 1977-1979 model years, and so it made sense to apply that name to the Pontiac-ized Citation. Phoenix production continued through the 1984 model year (the Citation managed to hang on through 1985). Just to confuse everyone, the Nova name was revived in 1985, on a NUMMI-built Toyota Corolla. The LJ trim level was the nicest one for the 1980 Phoenix, and it included lots of trim upgrades and convenience features. However, even Phoenix LJ buyers had to pay extra for a three-speed automatic transmission instead of the base four-on-the-floor manual ($337, or about $1,291 in 2022 dollars). If you wanted air conditioning, that was another $564 and you had to get the $164 power steering and the $76 power brakes with it (total cost in 2022 dollars: $3,080). Affordable cars weren't so affordable back then, not once you started adding basic options. Both generations of the Phoenix had grilles influenced by those of the Pontiacs of earlier years. The base engine was the chugging 2.5-liter Iron Duke four-cylinder, but a 2.8-liter V6 was optional. This car has the V6, rated at 115 horsepower rather than the Duke's miserable 90 horses. The price tag: 225 bucks, or 862 inflation-adjusted 2022 bucks. The Phoenix was available just as a two-door coupe and five-door hatchback. The MSRP on this car would have started at $6,127, or around $23,469 now. That would have been a pretty good deal even after paying for the options, with the Phoenix's excellent mix of good interior space and solid fuel economy… but the Citation and its kin (the Oldsmobile Omega and Buick Skylark as well as the Phoenix) suffered from seemingly endless, highly publicized recalls and quality problems.

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

Junkyard Gem: 1968 Pontiac Catalina sedan

During the late 1960s, General Motors ruled the American car landscape, growing so dominant that the federal government considered antitrust action to break up the company. The General offered sporty Corvettes and muscular GTOs and rugged pickups and opulent Fleetwoods, sure, but the fat part of the sales numbers came from the bread-and-butter full-sized sedans and coupes, which boasted superior engineering and modern-looking styling; in 1967 alone, the Chevrolet Division moved 972,600 full-sized cars, and that's not even counting the 155,100 full-sized Chevy station wagons that year. Pontiac, Buick and Oldsmobile sold the same big cars with division-specific engines and bodywork, and they flew off the showroom floors. For 1968, the entry-level full-sized car from Pontiac was the Catalina, and I've found an example of the most affordable version of the most affordable big Pontiac for 1968, discarded in a northeastern Colorado wrecking yard about 50 miles south of Cheyenne, Wyoming. A '68 GM full-sized coupe, convertible, or even a four-door hardtop might be worth the cost and effort of a restoration, but a no-options base-trim-level post sedan with rust and plenty of body filler just won't get many takers these days. Like so many vehicles that sit outside for decades on the High Plains, this one is full of rodent nests. I wouldn't want to work on the interior of this car without a respirator and a lot of work with a shop-vac, because hantavirus is a significant danger in these parts. Alfred Sloan's plan to offer a stepladder of prestige for GM buyers, in which your first new car was a Chevrolet and you moved up through Pontiac, Oldsmobile, and Buick until you became sufficiently prosperous for Cadillac ownership, worked brilliantly for decades. In 1968, the Catalina was a notch above its Impala sibling on the Snob-O-Meter, with the sedan starting at $3,004 (about $22,600 in 2019 dollars). In fact, the V8-equipped 1968 Chevrolet Impala sedan listed at $3,033, and the Oldsmobile Delmont 88 went for $3,146, so the lines were beginning to blur between the relative positions of the lower-end GM divisions by this time. The base engine in the 1968 Catalina was a 400-cubic-inch (6.5 liter) V8 rated at 265 horsepower and enough torque to tow an aircraft carrier.