2000 Pontiac Grand Prix on 2040-cars

Auto blog

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...

The U-2 spy plane needs high-performance cars to help land

Typically, aircraft deploy their landing gear from three main points. Most military aircraft, for example, deploy two gears at the back and one forward, like a tricycle. Some civilian aircraft flip the layout, with two in front and one in back - tail-draggers. The U-2 Dragon Lady is wildly different than any of these. With a 103-foot wingspan but a body that's just 63-feet long, the layout of the U-2 makes a traditional landing setup infeasible. Instead, the U-2 utilizes a pair of wheels, one up front and one in back. With such a bizarre layout, landings are so tough that since the U-2's earliest flights at Area 51, the US Air Force has used high-performance chase cars to guide the pilot down safely. The landing process isn't over there, though. As this video from Sploid shows, balancing out the aircraft to fit the detachable "pogos" – think training wheels for spy planes – is a comical procedure requiring a number of airman using their full body weight to even out the U-2. This video also recaps some of the great vehicles that have served as chase vehicles for this legendary spy plane. They include Chevrolet El Caminos, and the Fox-body Ford Mustangs so favored by the California Highway Patrol. For the last several years, the USAF has utilized products from General Motors, using fourth-generation Chevy Camaros, before switching over to the Pontiac GTO and most recently, the awesome Pontiac G8. It's fair to say that if you're a gearhead in the Air Force, this is the job you want. Check out the video, embedded up top. News Source: Sploid via YouTubeImage Credit: Sploid Chevrolet Ford GM Pontiac Military Performance Videos

This junkyard '91 Grand Am is as hooptie as it gets

I spend a lot of time in junkyards. A lot of time. With all this experience, I have learned to recognize a perfect hooptie when I see one, a car whose final owner got every last bit of use out of it when its value was hovering right about at scrap value. This 1991 Pontiac Grand Am that I spotted in a San Francisco Bay Area self-service wrecking yard a few days ago, from the final model year for the third-generation Grand Am, checks all the hooptie boxes just right. First of all, it's a low-option coupe with the wretched and unloved GM Iron Duke engine, a rattly, gnashy, thrashy 2.5-liter four-cylinder kludged together using off-the-shelf parts from the Pontiac 301-cubic-inch V8 during the darkest years of the Malaise Era and used in cars whose buyers just didn't care. Most of the paint has been burned off by 25 years of harsh California sun, but the car spent sufficient time in a damp, shady spot for lichens to build up here and there. There are skeletons-with-sombreros stencils sprayed here and there, plus a big moonshine-guzzling skeleton mural painted on the hood. Goodbye, property values! Still, someone felt some affection for this car, giving it the name "Good Ol' Snakey" and painting that name on the decklid. We can assume that the Iron Duke was a bit loose by this time, probably leaving a serpentine trail of blue smoke behind the car at all times. So, the combination of cheapness, ugliness, menace, and who-gives-a-damn functionality make this Grand Am an excellent example of a pure hooptie. Within a couple of months, it will be crushed, shredded, shipped out of the Port of Oakland, and reborn in China as refrigerators and Geely Emgrands. Somewhere in Northern California, though, a few of Ol' Smokey's friends will remember this car fondly.