1969 Pontiac Gto The Judge on 2040-cars

Auto blog

Junkyard Gem: 1980 Pontiac Phoenix LJ Hatchback

The car-building world was rushing headlong into front-wheel-drive by the late 1970s, eager to reap the weight-saving and space-enhancing benefits of front-drive designs. General Motors designed an innovative FWD platform to replace the embarrassingly outdated Chevrolet Nova and its siblings, and that ended up being the Chevrolet Citation. The other US-market GM car divisions (except Cadillac) got a piece of the X-Body action, and the Pontiac version was called the Phoenix. Here's one of those first-year Phoenixes, not doing a very good job of rising from its snow-covered ashes in a Colorado self-service yard. Pontiac had used the Phoenix name on a luxed-up iteration of Pontiac's version of the Chevy Nova during the 1977-1979 model years, and so it made sense to apply that name to the Pontiac-ized Citation. Phoenix production continued through the 1984 model year (the Citation managed to hang on through 1985). Just to confuse everyone, the Nova name was revived in 1985, on a NUMMI-built Toyota Corolla. The LJ trim level was the nicest one for the 1980 Phoenix, and it included lots of trim upgrades and convenience features. However, even Phoenix LJ buyers had to pay extra for a three-speed automatic transmission instead of the base four-on-the-floor manual ($337, or about $1,291 in 2022 dollars). If you wanted air conditioning, that was another $564 and you had to get the $164 power steering and the $76 power brakes with it (total cost in 2022 dollars: $3,080). Affordable cars weren't so affordable back then, not once you started adding basic options. Both generations of the Phoenix had grilles influenced by those of the Pontiacs of earlier years. The base engine was the chugging 2.5-liter Iron Duke four-cylinder, but a 2.8-liter V6 was optional. This car has the V6, rated at 115 horsepower rather than the Duke's miserable 90 horses. The price tag: 225 bucks, or 862 inflation-adjusted 2022 bucks. The Phoenix was available just as a two-door coupe and five-door hatchback. The MSRP on this car would have started at $6,127, or around $23,469 now. That would have been a pretty good deal even after paying for the options, with the Phoenix's excellent mix of good interior space and solid fuel economy… but the Citation and its kin (the Oldsmobile Omega and Buick Skylark as well as the Phoenix) suffered from seemingly endless, highly publicized recalls and quality problems.

Junkyard Gem: 1992 Pontiac Sunbird convertible, with extremely rad W25 Appearance Package

Radwood has sparked a revival in the appreciation of goofy 1980s and 1980s automotive fashions, from neon-colored tape stripes to excessive TURBO badging to ads featuring horrifying Nagel-style women with radio faceplates instead of eyes. I see a lot of discarded cars that would have been ideal to bring to Radwood, and today's Junkyard Gem is even radder than, say, a purple Mercury Tracer Trio or a teal Chevy Beretta GT or even the elusive Dodge Daytona IROC R/T (yes, there were IROC Daytonas): a genuine Pontiac Sunbird SE convertible with the W25 Appearance Package and Bright White Star wheels. The W25 package got you a white Sunbird with kicky script badging, white wheels, and — if you opted for the optional 3.1-liter V6 — these candy-cane-influenced red-and-white displacement badges on the fenders. Now this is rad! The white interior got dirty fast, especially if the owner left the convertible top down, and these wheels were tough to keep clean for more than a few hours. This one appears to have spent many years sitting abandoned with the top down, judging by the completely trashed interior. The base engine for 1992 was the good old Cavalier four-banger, complete with 111 horsepower. This 3.1-liter engine made a respectable-for-1992 140 horses, for plenty of torque-steery, tire-squealy fun. As a J-Body car, the Sunbird was a sibling to the Chevrolet Cavalier in 1992 (the J-based Cadillac Cimarron, Oldsmobile Firenza, and Buick Skyhawk departed before the end of the 1980s). Starting in 1994, the Pontiac Sunfire replaced the Sunbird, continuing in production all the way through the demise of the J platform in 2005. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Where (in Canada) would you test-drive your Sunbird? Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...