1968 Pontiac Gto on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero GT

If you like affordable, mid-engined two-seaters, the 1980s were your decade. Fiat (and, a bit later, Bertone) offered the X1/9, Toyota sold MR2s, and even General Motors got into the act by creating the Fiero. Available from the 1984 through 1988 model years, the Pontiac Fiero showed plenty of promise but ended up being mostly disappointing, in some ways echoing the career of the Chevy Corvair of a couple of decades earlier. Today's Junkyard Gem is a once-spiffy 1986 Fiero GT, found in a self-service yard near Denver, Colorado. After a long and painful development period stretching all the way back to John DeLorean's XP-833 Banshee (which ended up being a major influence behind the original Opel GT), the Fiero finally debuted in 1983 as a 1984 model. The top-of-the-model-range GT appeared the following year. The Fiero was built as a notchback coupe and as a fastback, with all the GTs being the latter type. I couldn't get the engine lid open, but this car would have left the assembly line (in Pontiac, Michigan) with a 2.8-liter V6 rated at 140 horsepower. This car has a five-speed manual transmission, making it a credible rival for Toyota's MR2.  The 1986 MR2 was less powerful than the Fiero GT (112 horsepower versus 140), but also scaled in significantly lighter (2,459 pounds against the Pontiac's 2,780 pounds). The MR2 also cost less, priced at $11,298 while the Fiero GT cost $12,875 (that's about $30,540 and $34,805, respectively, in inflation-adjusted 2022 dollars). Meanwhile, the $6,998 Honda Civic CRX two-seater lured away many potential Fiero buyers despite being a front-engined/front-wheel-drive car, and the $7,186 Ford EXP/Mercury LN7 also put a dent in Fiero sales. I can't find a price for the 1986 Bertone X1/9, but it cost a hard-to-believe $13,990 in 1984. GM still was using five-digit odometers in many vehicles by the middle 1980s, but this Fiero has a six-digit unit and thus we can see that it nearly achieved 150,000 miles during its driving career. The 1984-1987 Fiero suffered from a parts-bin suspension design, with the front suspension borrowed from the Chevrolet Chevette and the entire rear transaxle/suspension assembly lifted from the front end of the Chevrolet Citation. For the 1988 model year, GM finally spent the money to design an improved Fiero-specific suspension … and then promptly put a halt to production.

Junkyard Gem: 2008 Pontiac G5 Coupe

In the grim early days of the Great Recession, the situation at GM's Pontiac Division didn't feel so great but there was some cause for optimism. The Solstice still had a certain glow, the Holden Commodore-based G8 had just arrived, and vehicle shoppers could stride into their local Pontiac showrooms and choose from eight different models bearing the iconic arrowhead badge. Yes, there were still new Torrents and Grand Prix and Vibes for sale in 2008, and of course the Cavalier-twin Sunfire had been replaced by the Cobalt-twin G5 by that time. Here's one of those G5s, found in a Colorado Springs car graveyard. It wasn't long after this car was built that everything went to hell for Pontiac. In April of 2009, GM announced that the Pontiac Division would be "phased out" over the next few years. Just to drive home the point, GM itself filed for Chapter 11 bankruptcy five weeks later. GM had already offed Oldsmobile—a marque dating back to 1897, making it nearly 30 years Pontiac's senior—five years earlier, so everybody knew there would be no reprieve in this case. Just to confuse everybody, Pontiac dealers offered a G3-badged Chevy Aveo (aka Daewoo Kalos) to sell alongside the G5 for 2009, but by 2010 there were just two new Pontiac models still standing in the United States: the G6 and the Vibe. Just over 70,000 G5s were sold in the United States during the 2007-2009 model years, making these cars fairly rare. The Cobalt/G5 ignition-switch fiasco of the mid-2010s really hammered their resale value at the time. Sometimes the definition of "Gem" refers to historical value, not the happier kind. Speaking of ignition switches, the key is still in this one. That generally means that a junkyard vehicle is a dealership trade-in or insurance total that couldn't sell at auction. This one is a base model, which listed at $15,675 (about $22,040 in 2023 dollars). The snazzier G5 GT started at $19,850 ($27,911 now) that year. The engine in this car is a 2.2-liter Ecotec four-banger rated at 148 horsepower and 152 pound-feet (the GT got a 2.4 with 171 hp/167 lb-ft). A five-speed manual was standard equipment, but the buyer of this car paid extra for the automatic. GM stuck these little "Mark of Excellence" badges on the fenders of its vehicles starting in 2005, then ditched the idea in 2009. I have vivid memories of this logo from the seatbelt buttons in my parents' 1973 Sportvan Beauville.

2020 Porsche 911 Speedster spied with an angry driver

Porsche gave us details and showed us a concept of the 911 Speedster at the Paris Motor Show. Today, we bring you spy shots of what appears to be the production version of that concept with a few changes on board. They're rather minimal modifications, but the Speedster's driver appears especially angry with our spy photographer as he extends his middle finger directly toward the camera. Sorry, not sorry, Mr. Test Driver. Public testing of pre-production cars always comes with photo risks, and Porsches tend to attract more attention than others. You'll notice what appears to be a Cayenne Coupe prototype we've previously spotted running around with the 911. The Speedster Concept we saw in Paris had epic retro mirrors and fuel cap on the front hood, but both those design touches are absent from this pre-production car. It's tougher to see, but we lost the vents in between the two humps, as well. Everything else appears to have made it to production-spec. We can't say we're surprised these concept car features probably won't show up on the production car, but it is a tad deflating. You'll notice the Speedster is based-off the 991.2 generation of 911 and not the new 992. Porsche did a similar thing when the 997 generation was coming to an end with a Speedster model paying tribute to that car's life. The chassis is said to utilize parts from the 911 GT3, and the wonderful naturally aspirated flat-six engine gets carried over from that car, too. Porsche didn't specify if power will be exactly the same as the GT3, but we'll be expecting about 500 horsepower and a 9,000 rpm redline. We were told the six-speed manual would be offered on the Speedster in Paris, too. Let's just say that we strongly approve of that combination. Production will be limited to only 1,948 cars and begin in the first half of this year. We'll expect a reveal with a full spec breakdown soon, possibly for the upcoming Geneva Motor Show. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.