1965 Gto Tri. Power Conv. on 2040-cars

Auto blog

This classic Firebird restomod swallowed a Prius

It takes an unusual eye to look at a 1967 Pontiac Firebird and see the Toyota Prius hidden inside. But that's just the kind of eye that a creative mechanic known online as "Bill the Engineer" has. Bill is updating his old Firebird into a true classic for the 21st century and has documenting the changes over at Priuschat and EcoModder. The TL,DR version of the story: he's replacing the worn-out powertrain with the gas-electric hybrid one from a Prius V, because it turns out the two vehicles have almost exactly the same wheelbase. Bill, who's from Columbus, Ohio and doesn't want his full name used, said in his posts on the conversion project that he's made many memories with this vehicle since buying it back in 1979. Since then, a few moves, a few decades, and some time in storage meant that the car would no longer function as he wanted it to. As he wrote, "when it comes to mice in the vehicles IT IS WAR." His solution is to make new memories and making a greener vehicle, and so we wanted to ask him how things have been going. Bill's been traveling a bit recently, but told AutoblogGreen that he's now figuring out the next steps for this amazing and complicated project. "I always plan things out before I do them," he said. That's the only way something like this can work. ABG: I think we have to start with what gave you the inspiration for this project. Was it simply that you had the two cars and wanted to see them merged into one cool mashup, or was it something else? "One day my wife wondered out loud if the car could be converted into a hybrid... The rest is history." Bill: I have been the owner of my 1967 Firebird convertible since 1979 when I bought it for $750.00. I drove it for years and made many memories. Afterward it was in storage for many years during which time mice at their way into the car and trashed the interior and wiring. I started working on a conventional restoration but always ran into major problems with hidden corrosion, electrical issues and an engine on its last legs. The car was never going to be as nice as I wanted going the conventional route. One day my wife wondered out loud if the car could be converted into a hybrid like our two daily driver Prii. That got me thinking about how it could be done. The rest is history... ABG: It looks like you started in late 2014. Have things gone well since then, or has it been one hassle after another? What has been the biggest setback, and what were the biggest victories?

Junkyard Gem: 1984 Pontiac Fiero with supercharged 3800 V6 swap

Like the Corvair, the Vega, and the Citation, the Pontiac Fiero was a very innovative machine that ended up causing General Motors more headaches than happiness, and Fiero aficionados and naysayers continue to beat each other with tire irons (figuratively speaking, I hope) to this day. The General has often proved willing to take the occasional big gamble and huge GM successes in engineering prowess (including the first overhead-valve V8 engine for the masses and the first real-world-usable true automatic transmission) and marketing brilliance (e.g., the Pontiac GTO and related John DeLorean home runs) meant that the idea of a mid-engined sporty economy car (or economical sports car) got a shot from the suits on the 14th floor. Sadly, the Fiero ended up being the marketplace victim of too many issues to get into here, and The General pulled the plug immediately after the 1988-model-year suspension redesign that made the Fiero the sports car it should have been all along. But what if the plastic Pontiac had never suffered from the misery of the gnashy, pokey Iron Duke engine and had been built from the start with a screaming supercharged V6 making way better than 200 horsepower? The final owner of today's Junkyard Gem sought to make that very Fiero, by dropping in one of the many supercharged 3.8-liter V6s installed in 1990s and 2000s GM factory hot rods. The first Fieros came out in 1983 for model year 1984, and the only engine available that year was the Iron Duke 2.5-liter four-cylinder, which generated its 92 horsepower with the full-throated song of a Soviet tractor stuck in the freezing mud of a Polish sugar-beet field. The 2M4 badging stood for "two seats, mid-engine, four cylinders," just as the numbers in the Oldsmobile 4-4-2 once represented "four carburetor barrels, four-speed manual transmission, dual exhaust." This car is a top-trim-level SE model, which listed for $9,599 (about $24,200 today). The no-frills Fiero cost just $7,999 that year, making these cars far cheaper than the only other reasonably affordable new mid-engined car Americans could buy at that time: the $13,990 Bertone (aka Fiat) X1/9. The Toyota MR2 appeared in North America as a 1985 model with a base price of $10,999 and promptly siphoned off the car-buying cash from a bunch of potential Fiero shoppers.

The last Pontiac Fiero sold for $90,000 at auction

On August 16, 1988 the last Pontiac Fiero, a red GT model, rolled off the assembly line at GM's Pontiac Assembly plant located in Pontiac, Michigan. It wasn't just the final Fiero, but the final car to be built at that site. The car was raffled off to one of 1,400 plant employees that would soon have to find jobs elsewhere. Whoever that employee was, they remained faithful to the Fiero and kept it in mint condition for 32 years. Last month, it was finally time to move on. It crossed the block at GAA Auctions in Greensboro, North Carolina where it sold for an astounding $90,000. According to the auction house, that's a new world record. The price no doubt reflected the car's place in history as the last example of GM's 1980s mid-engined sports car. However, it was also showroom-new, with just 582 miles clocked on its 2.8-liter V6. 1988 models were also fitted with an upgraded, Lotus-esque suspension produced for just that one year. In addition, this car, serial number 226402, came with its original build sheet, photos from the assembly line, and a collection of news articles and books. It still wore its pre-delivery plastic on the interior and was fully loaded with automatic transmission. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The car's custodian for the past 32 years must be pleased. Bidding started at $25,000 but soon rocketed past the $65,000 reserve. You can see the action starting at the 2:50:13 mark in the video above. The Fiero was symbolic of the 1980s and stood out from the standard GM passenger car fare for its mid-engine layout and plastic body panels. In an era when GM often rebadged cars with minimal differences, the Fiero rode on its own unique chassis. It was positioned as one of the defining products for Pontiac, GM's "excitement" brand, but actual performance never quite lived up to its striking looks.  Nevertheless, it garnered a cult following. It's often the basis for (questionable) custom builds mimicking more exotic models like Ferraris and Lamborghinis, thanks to a steel space-frame design that allows body panels to be easily removed. Thankfully, this significant example escaped such a fate and will live on as a reminder of an interesting chapter of automotive history.