1964 Gto Hardtop on 2040-cars

Auto blog

Junkyard Gem: 1986 Pontiac Fiero 2M4

The mid-engined, plastic-bodied Pontiac Fiero two-seater caused great excitement when it hit the streets as a 1984 model, then became something of an embarrassment for GM when its design flaws became clear to the car-buying public. Still, when a V6 engine became available for 1985, followed by a fastback roof for 1986, the air of Pontiac Excitement around the Fiero lingered to a certain extent. We took a look at a discarded '86 Fiero GT with both the 2.8-liter V6 and the fastback body last year, and now we'll take a look at an example of the econo-commuter four-cylinder notchback version from the same year. Pontiac used the 2M4 designation (standing for two seats, mid-engine, four cylinders) on four-cylinder Fieros, while the six-cylinder cars were known as 2M6s. 2M4 decals went on four-banger Fieros for the 1984-1986 model years, while 2M6 decals seem to have been applied less consistently to the V6 cars of that period. During the early development period of the car that became the Fiero, the idea was that it would be a nimble sports car with a lightweight engine. Then the plan shifted, with the Fiero intended to be a gas-sipping commuter. When the car finally hit showrooms, it was a lot heavier than intended, it had a Chevy Citation front suspension in the back plus a Chevette front suspension, and its engine was the low-revving, weighty Iron Duke 2.5-liter straight-four. The Duke was about the least sports-car-appropriate four-cylinder engine The General could dredge up from his parts bins, but it was cheap and there was no shortage of production capacity. By the time the Fiero came out, the Iron Duke had been renamed the Tech 4. This one was rated at 92 horsepower and 132 pound-feet. The V6 Fieros get all the press today, but plenty of the Duked versions were sold (amazingly, the Chevrolet Camaro was available with Iron Duke power from 1982 through 1986). The emissions sticker tells us that this was a California-market car, rather than the "49-state" model the rest of the country got. California-specific emissions hardware added $99 to this car's price ($277 in 2023 dollars). While this car is a base model, the original buyer loaded it with options. The transmission is a three-speed automatic, priced at $465 (about $1,303 in 2023 dollars). A five-speed manual was standard equipment on the 1986 Fiero, though the old-fashioned four-speed manual was still available for a $50 credit ($140 now).

GM Design shows what could have been and what might be

We periodically like to check in with GM Design's Instagram account to see what they're cooking up. Even better is when we catch a glimpse of an alternate history of what legendary designers from The General's past were thinking, though those ideas may not have made it into production. This week, for example, the account posted some illustrations from George Camp, whose career at GM spanned nearly four decades, from 1963 to 2001. One of the renderings is of what appears to be a 1971-72 Pontiac GTO Judge, but with two headlights instead of the production unit's quad beams. The rear departs from the canonical version most dramatically, with a massive integrated wing. Other bits that didn't make the production cut include large side vents, a gill-like side marker and rectangular intakes below the headlights that wouldn't be out of place on a modern design today. Amazingly, from what we can make out of the date, it appears that the drawing was done sometime in 1965, which makes it quite prescient.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) There's also a very aerodynamic interpretation of a Corvette ZR-1. To our eyes it splits the difference between the 1986 Corvette Indy concept and a fourth-generation F-body Pontiac Firebird, so perhaps parts of Camp's work on this sketch did make it into physical form. There's also a radical sports car concept from May 1970 that resembles the Mazda RX-500 concept from the same year, a Syd Mead-looking Cadillac coupe, and an Oldsmobile with a cool take on the company's trademark waterfall grille and elements of the Colonnade Cutlass at the rear. Other recent posts include a FJ Cruiser-like off-road EV, a sleek coupe with the Chevy corporate grille, and a rendering of a Silverado-esque pickup that looks far better than the current production version.           View this post on Instagram                       A post shared by GM Design (@generalmotorsdesign) It's pretty easy to lose hours in the account, but it's always fascinating to see GM's visions of what could have been and what might be. Related Video:

Why Pontiac should come back and how it can be relevant again

When I was a kid growing up in Metro Detroit, our family was always entwined in the General Motors empire. My dad and some of our relatives worked for GM in various capacities, and we had our fair share of Chevrolet, GMC, and even Buick products in our humble driveway. However, it was my Uncle Ed that always had a vehicle from the one GM brand that always appealed to me the most: Pontiac. Seeing him pull up in his Pontiac 6000 and later the '90s era Grand Prix sedan that replaced it was always an exciting occasion, and both of these models also reflected the playful spirit that once defined the Pontiac brand. Back when Pontiac first got its performance groove on in the '60s, names such as GTO, Firebird, as well as Bonneville became iconic nameplates in the broader muscle car era. The '80s saw Pontiac lose some of its styling heritage, but also try new things at the same time including turbocharging as well as the mid-engine sports car with the flawed but still sleek Pontiac Fiero. When the Pontiac brand was shuttered in 2009, it was a mere few years after I earned my drivers license, and also when Pontiac was just beginning to regain some of its lost luster. Granted cookie cutter efforts like the Pontiac G3, (Chevrolet Aveo) G5, (Chevrolet Cobalt) and G6 (Chevrolet Malibu) certainly did not help matters during Pontiac's final years on the market, but two models in particular offered a compelling glimpse into what could've been for the storied brand. The first was the Pontiac Solstice roadster/coupe. Originally introduced as a concept back in 2004, and championed by everyone's fighter jet flying auto executive Bob Lutz, the Solstice was designed to be a serious competitor to the Mazda Miata, and while its interior ergonomics were flawed and the top solution not ideal. It proved to be a fun little car to drive, and also a sales success for Pontiac with initial demand exceeding expectations.This was especially due to its lineup of engines with the 2.0 liter LHU turbocharged four-cylinder engine delivering 260 horsepower in GXP variants. The second and (inarguably my favorite Pontiac model) was the Pontiac G8 sedan. Originating in Australia as the Holden Commodore VE, the G8 was designed to rectify the multitude of sins created by the last generation Bonneville. Front wheel drive was pitched in favor of rear wheel drive, and for the first time in a long time interior ergonomics and cladding free exterior styling were key building blocks for success.