2009 Pontiac G8 Gt Sedan 4-door 6.0l on 2040-cars

Auto blog

GM Recalls 1.5 Million Cars For Steering Defect

General Motors Co. said Monday it is recalling 1.5 million vehicles worldwide because the electronic power-steering assist can suddenly stop working, making them harder to steer. The new recall brings to 6.3 million the number of vehicles GM has recalled since February. The initial recall - now at 2.6 million small cars for an ignition switch defect - prompted the automaker to name a new safety chief and speed up the review of cases that might lead to recalls. GM said it expects recall-related costs to total $750 million in the first quarter, including $300 million for the ignition switch recall. Included in the new recall are: - Chevrolet Malibu from the 2004-2005 model years, plus some 2006, 2008 and 2009 model-year cars. - Chevrolet Malibu Maxx from the 2004-2005 model years, plus some 2006 model-year cars. - Chevrolet HHR from the 2009-2010 model years (non-turbocharged only). - Some Chevrolet Cobalts from the 2010 model year. - Some Saturn Auras from the 2008-2009 model years. - Saturn Ion from the 2004-2007 model years. - Pontiac G6 from the 2005 model year, plus some cars from the 2006, 2008 and 2009 model years. - Service parts installed into certain vehicles before May 31, 2010, under a previous recall GM says no deaths related to the defect have been reported. It is still investigating whether there have been any accidents or injuries related to the problem. GM dealers will replace the power steering motor and other parts for free. Spokesman Alan Adler said owners will be notified of the recall the week of April 28 and will be told when parts are available after that. The Cobalt and the Ion, which are also involved in the ignition switch recall, share many common parts.GM recalled Cobalts from the 2005-2010 model years for the power steering defect in 2010, but it's unclear why the company didn't recall the Ion at the same time. Federal regulators also opened an investigation into power steering complaints in the Ion in 2010, but didn't order a recall. Related Gallery 2014 Chevrolet Corvette Stingray Test Drive View 9 Photos Recalls GM Pontiac Chevy Cobalt saturn ion pontiac g6 Chevrolet Cobalt Chevrolet HHR

Vitruvian Energy crowdfunding to make EEB, a trashy biofuel

When sewage is treated at a wastewater treatment facility, biosolids are the byproduct. After being separated from the water, biosolids are usually sent to a landfill or incinerated. That doesn't mean that they're without value, however. Vitruvian Energy has created a process to make a usable fuel out of this human waste product, and while the source is pretty gross, it is undeniably abundant, and the results are much cleaner. EEB can be made for less than $4 a gallon. In a process that Vitruvian Energy claims is energy efficient, biosolids are femented and introduced to a type of bacteria to create PHA plastic. Reacting the PHA with ethanol creates the ethyl-3-ethoxybutyrate (EEB) biofuel. Vitruvian says EEB can be blended up to 20 percent with gasoline or diesel without any engine modifications. This lowers the carbon footprint of the fuel it's blended into, and serves to oxygenate diesel, leading to fewer harmful emissions. EEB can also be made using other organic waste products, such as corn stover, rice straw and distillers grains. EEB can be made for less than $4 a gallon and isn't subject to the maddening market fluctuations and international politics of fossil fuels. Furthermore, EEB's carbon footprint is 70 percent less than that of fossil fuels. Vitruvian also sees potential for EEB to be used on its own to power vehicles or burned to produce electricity for the grid. So far, Vitruvian Energy has used grants from the California Energy Commission and National Science Foundation to develop EEB, and has tested the fuel in a Pontiac Solstice at Oak Ridge National Laboratory. Now, Vitruvian is wants to test EEB on a larger scale in the real world in order to prove EEB's viability to interested parties in the wastewater treatment industry. In an Indiegogo crowdfunding campaign, Vitruvian Energy hopes to raise $200,000 to build a prototype EEB production line and to run a test vehicle for a year on an EEB-diesel blend on the streets of Seattle. Donors can score some interesting perks such as shirts and bumper stickers that say "Get Clean with Poopaline." Learn more about EEB in the video and press release below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...