2008 Pontiac G6 Gxp on 2040-cars

Auto blog

Junkyard Gem: 2002 Pontiac Aztek

The General's Pontiac Division sold the Aztek for the 2001 through 2005 model years, and — despite enjoying something of a cultural rebirth in recent years — it is generally considered to be one of the worst cars of all time. The idea of using a minivan platform as the basis for a rough-and-tough-looking crossover with plenty of outdoor-lifestyle amenities wasn't the problem, since many vehicle manufacturers have printed bales of money using that formula. What doomed the Aztek was its hideous appearance and sticker price too lofty for its underemployed-at-the-time Generation X target demographic. Still, the Aztek proved to be perfectly suited for the outdoor activities that Coloradans love: hiking, camping, fishing, skiing, hauling mud-caked golden retrievers around, etc., and so you'll still find lots of Azteks on the roads of the Centennial State. Here's an Aztek Yellow Aztek (yes, that's really the paint color's official title) residing just a few rows from a '76 Checker Taxicab in a Denver self-service yard. Sure, it does look like a vehicle built to the specifications of a six-year-old who decreed a mashup between a Datsun F-10 and a Fisher-Price Little People Travel Together Airplane, but so what? There's a built-in air compressor to blow up your inflatable rafts and volleyballs, a tent attachment that turns the rear of the van into a camper, 12-volt power plugs all over the vehicle (years before this became commonplace on ordinary minivans and SUVs), and running-gear commonality with a jillion Ventures, Silhouettes, Montanas and Trans Sports. Buick managed to de-uglify the Aztek (somewhat) and sold it as the Rendezvous through 2007, but the Aztek never could win over many people with this face. I see plenty of Azteks and Rendezvouses in Denver-area wrecking yards, and I've documented a handful over the years. This one came fully loaded from the factory, with the Corvette-style heads-up display in full effect. The center console was a removable cooler, which was a great idea Â… except for the fact that this cooler holds five standard 12-ounce cans. Michigan residents tell me that this must have been intentional on the part of the Detroit-based Aztek designers, because Michiganders are expected to chug one beer out of a sixer as they walk from the liquor store to the car in the parking lot Â… which makes me extra cautious whenever I'm driving in the Wolverine State.

Junkyard Gem: 1968 Pontiac Catalina sedan

During the late 1960s, General Motors ruled the American car landscape, growing so dominant that the federal government considered antitrust action to break up the company. The General offered sporty Corvettes and muscular GTOs and rugged pickups and opulent Fleetwoods, sure, but the fat part of the sales numbers came from the bread-and-butter full-sized sedans and coupes, which boasted superior engineering and modern-looking styling; in 1967 alone, the Chevrolet Division moved 972,600 full-sized cars, and that's not even counting the 155,100 full-sized Chevy station wagons that year. Pontiac, Buick and Oldsmobile sold the same big cars with division-specific engines and bodywork, and they flew off the showroom floors. For 1968, the entry-level full-sized car from Pontiac was the Catalina, and I've found an example of the most affordable version of the most affordable big Pontiac for 1968, discarded in a northeastern Colorado wrecking yard about 50 miles south of Cheyenne, Wyoming. A '68 GM full-sized coupe, convertible, or even a four-door hardtop might be worth the cost and effort of a restoration, but a no-options base-trim-level post sedan with rust and plenty of body filler just won't get many takers these days. Like so many vehicles that sit outside for decades on the High Plains, this one is full of rodent nests. I wouldn't want to work on the interior of this car without a respirator and a lot of work with a shop-vac, because hantavirus is a significant danger in these parts. Alfred Sloan's plan to offer a stepladder of prestige for GM buyers, in which your first new car was a Chevrolet and you moved up through Pontiac, Oldsmobile, and Buick until you became sufficiently prosperous for Cadillac ownership, worked brilliantly for decades. In 1968, the Catalina was a notch above its Impala sibling on the Snob-O-Meter, with the sedan starting at $3,004 (about $22,600 in 2019 dollars). In fact, the V8-equipped 1968 Chevrolet Impala sedan listed at $3,033, and the Oldsmobile Delmont 88 went for $3,146, so the lines were beginning to blur between the relative positions of the lower-end GM divisions by this time. The base engine in the 1968 Catalina was a 400-cubic-inch (6.5 liter) V8 rated at 265 horsepower and enough torque to tow an aircraft carrier.

Gordon Murray, F1-driven production and .. the Pontiac Fiero

Gordon Murray's design and engineering chops are unquestionable. But does his carmaking approach owe something to the short-lived Pontiac Fiero, a scrappy little car program that emerged from GM against serious resistance? Murray had a Formula One career that ran from 1969 to 1991, with stints at Brabham ('69 to '86) and McLaren ('87-'91), that resulted in several shelves' worth of trophies for the cars he was instrumental in designing. He moved on to McLaren Cars, the consumer side of things, where, during his tenure from 1991 to 2004, he helped design the McLaren F1 and the Mercedes-Benz SLR McLaren, two cars that took learnings from his two decades in Formula One. What do all of these cars have in common? Three things: They are light. They were built in limited numbers. And they were (and are) exceedingly expensive—when the McLaren F1 debuted in 1994, it stickered at $815,000. Murray went on to establish Gordon Murray Design in 2007. GMD has created some interesting concept vehicles, such as the diminutive T.25 city car (94.5 inches long, 51.1 inches wide and 55.1 inches high), and the OX, a lightweight truck for the developing world that packs like an IKEA shelf and is working toward realization through a worthy crowdfunding campaign established by the Global Vehicle Trust. Now he has created a vehicle manufacturing company, Gordon Murray Automotive, that will use manufacturing methods that he developed under the moniker "iStream." Unlike a unibody, there are the "iFrame," a cage-like construction made with metallic components, and the "iPanels," which are composite. The panels aren't simply a decorative skin; they actually provide structure to the vehicle. Presumably this has something of the F1 monocoque about it. Going back to the three elements, (1) this arrangement results in a vehicle that can be comparatively light; (2) Murray has indicated that his manufacturing company will be doing limited-run production; and (3) to launch Gordon Murray Automotive they are going to be building a flagship model, about which Murray said, "With our first new car, we will demonstrate a return to the design and engineering principles that have made the McLaren F1 such an icon." Which seems to imply that it will be on the pricey side. According to the company's verbiage, "iStream forges an entirely new production method that defies conventionality with its Formula One-derived construction and materials technologies." It also sounds a whole lot like ...