2008 Nissan Armada Se 4wd Damaged Salvage Runs! Perfect Project Vehicle L@@k!! on 2040-cars
Salt Lake City, Utah, United States
|
We are pleased to
offer this 2008 Nissan Armada SE 4WD that is damaged
(please take a look at pictures for current damage) this priced to sell Nissan is the perfect project vehicle and does run in
lot, which means it can be driven on to a transport truck or trailer
since it is currently damaged!. We can offer Domestic and International
shipping arrangements, please take a look at the pictures for more details and
don't pass up the opportunity to own this builder for a fraction of the price
as the listing can be ended any second due to local buyers!!!! This
Vehicle has a Salvage Certificate and currently not
registered. The buyer will have to register it in his state of residence, which
may or may not involve some extra steps compared to registering a clean title
car. All California Buyer must pay 9% sales tax and will receive a Acquisition
Bill Of Sale
This vehicle is
being sold as is, where is with no warranty of any kind. We are a bonded dealer
and do have to do all necessarily documents so charge 150 dollars document fee
on each and every vehicle. This vehicle is located in 7051 West 2100 South west valley city UT,84128 and
we can arrange shipping anywhere in the world!!
Any questions or concerns please
CALL/TEXT/SMS/EMAIL (310) 703 4199
FAQ'S -We are not a repair facility and have no
estimates - Additional pictures, please inspect or send any
inspector -"lot drive" means the vehicle can be
driven on a transport truck or trailer as it is a damaged vehicle and legally
not street worthy. California Buyers- How to register a
Acquisition Bill Of Sale Take bill of sale (Acquisition bill of sale) to
DMV. They will give you a moving permit to get: 1. A smog check 2. A brake and lamp inspection 3. A vin# inspection done at DMV or CHP 4. If it's a truck, they will want you to weigh
it When completed, they will give you new plates and
tags then send you a new title, which will be a salvage title, in
about 3 to 4 weeks average -NO FINANCING -Deposits- are 1000 dollars by credit card or
paypal and balance you can pay in person or send a wire transfer to our dealer. -Deposits give you 5 days to pay balance or
deposit will be lost IF YOU HAVE ANY
QUESTIONS PLEASE CALL 310-703-4199(Before you call or email please read Faq's below) or email us at sales@surmotorcars.com!!!!!! PLEASE TAKE A LOOK AT ALL
THE PICTURES THAT ARE PROVIDED AS EVERYONE REPAIRS IN DIFFERENT WAYS, SO IT IS
UP TO YOU ON WHAT YOU WOULD REPLACE OR REPAIR ON THE VEHICLE. THE PICTURES ON
THE WEBSITE ARE ALL THE PICTURES WE HAVE AND IF FOR ANY REASON YOU NEED ADDITIONAL PICTURES PLEASE SEND A INSPECTOR OR COME INSPECT THE
VEHICLE, AS WE DO NOT HAVE ANY REPAIR
ESTIMATES. WE ALSO DO NOT SELL PARTS OFF THE VEHICLES THAT ARE REBUILDERS , AS ONE
OF THE LEADERS IN THE SALVAGE INDUSTRY WE TRY AND PRICE ALL OUT VEHICLE'S RIGHT
TO NOT PLAY AROUND IN THE PRICE,SO IF YOU HAVE A LOW BALL OFFER DO NOT BOTHER AS WE
TRY TO PRICE OUR VEHICLES RIGHT. WE HAVE A VERY HIGH CALL VOLUME ON ABOVE QUESTIONS
SO THANK YOU VERY MUCH FOR TAKING THE TIME TO READ THIS BRIEF DISCLOSURE AND
GOOD LUCK ON YOUR BUILDER!!
Details -Odometer Discrepancy -Deposit Due within 12 hours of buy now -Final Payment due within 5 days -pickup required within 5 days from payment
-NO FINANCING OR TRADE
IN WHAT SO EVER. Monday - Friday: 9:00 am - 5:00 pm
|
Nissan Armada for Sale
2006 nissan armada le
New 14 armada platinum v8 4x4 dvd headrest 3rd row seating navigation(US $47,900.00)
2010 nissan armada se 4x4 8-pass leather nav-screen rearcam runboards heatseats(US $21,980.00)
2011 nissan armada platinum navigation(US $30,898.00)
Platinum suv 5.6l rear air conditioning third row low miles cln carfax(US $27,500.00)
4x4 5.6l,v8 dohc engine with variable valve tim rear wiper(US $26,972.00)
Auto Services in Utah
Tri-City Auto & RV, Inc ★★★★★
The Tire Pro`s Tire Factory ★★★★★
St George Transmission ★★★★★
Speed Shop ★★★★★
Rocky Mountain Tire & Service ★★★★★
Reynolds Auto Care ★★★★★
Auto blog
Nissan IDX sports coupe future increasingly cloudy [w/poll]
Tue, 15 Jul 2014There's a strong desire among enthusiasts for more inexpensive, lightweight, fun-to-drive, rear-wheel-drive cars to exist in a world that contrasts sharply with automakers' desire to make money. While we all love the feeling of controlling the back end with the throttle, front-wheel drive is king when it comes to affordable cars. One of the future bright spots in the rear-drive market appeared to come from Nissan with its pair of IDx concepts. The two showcars from the 2013 Tokyo Motor Show took liberal design inspiration from the classic Datsun 510 and mixed it with modern powertrains in very attractive little packages. However, some pretty dark clouds are reportedly now hanging over the project.
Last we heard, a production version was supposedly "in the plan" from the Japanese automaker, but its trajectory may have changed inside the company in the last few months. According to Pierre Loing, vice president of product planning for Nissan Americas, the issue is making the sports coupe profitable. While Nissan has access to rear-wheel drive platforms, they are all meant for more premium vehicles (read: they cost too much). Assuming around 60,000 annual sales, Loing tells Ward's Auto that making a dedicated chassis for the IDx just isn't a moneymaker. If the car still does see production, it'll be after 2016, he says.
The decision whether to build the IDx has been teetering for a while. Nissan spokesperson Dan Bedore previously told Autoblog that the coupe would need a groundswell of support from consumers and enthusiasts if is to actually have a shot at production. If you are among the hopeful looking to see this affordable, rear-drive performance car in showrooms, get some friends together and start letting Nissan know that you actually want it - you can start here by adding a Comment and voting in our poll, because we're going to send the results on to Nissan.
2022 Mitsubishi Outlander leaks via photo shoot
Wed, Dec 9 2020The 2022 Mitsubishi Outlander is making the rounds on social media this week after being spotted at a photo shoot, confirming a design we first saw in Geneva last year. Mitsubishi's new crossover was spotted staging for photos by an anonymous photographer, who snapped a few choice shots and shared them with allcarnews on Instagram. The quality of the photos is far from fantastic, but there's enough detail to confirm that the new Outlander will be an almost direct lift of the Engelberg Tourer Concept which Mitsubishi showed in Geneva last year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. There's also an obvious resemblance to the Outlander prototype caught in spy photos last year. The production model appears to retain the concept's discrete roof panel (which makes it ideal for contrasting colors like those on the show car) and the chipmunk-cheek styling around the headlights. The concept was ostensibly powered by a plug-in hybrid system (like the one found in the current Outlander PHEV, but with a 2.4-liter inline-4 engine rather than a 2.0-liter unit). Electric range was an estimated 43 miles, which also improves on the existing Outlander PHEV's 22 miles. The powertrain for non-hybrid Outlanders is more of a mystery. Reports from earlier this year suggest that the gasoline version could share powertrains with Nissan, which still owns a controlling stake in Mitsubishi. In exchange, Mitsubishi would supply its PHEV for the small Nissan Qashqai crossover, which is sold in the United States as the Rogue Sport. If that happens, and assuming Nissan brings it here, the Rogue Sport would be Nissan's first PHEV in the U.S. Related Video:
2016 Nissan Maxima launches production in Tennessee
Wed, Apr 22 2015The 2016 Nissan Maxima saw its big debut at the end of the brand's 90-second Super Bowl commercial this year. However, we didn't get the full details about the latest generation of the model marketed as the four-door sports car until the recent New York Auto Show. Now just a few weeks later, the sedans are rolling down the assembly line in Smyrna, TN, and they should hit the road this summer. "Today's launch of the all-new Maxima is the beginning of an exciting year for Nissan's US lineup, with new versions of the Altima, Sentra and Titan due later this year," John Martin, Nissan's senior vice president for manufacturing, supply chain management and purchasing, said in the production announcement. The sedan's revised 3.5-liter V6 is also made in Tennessee at Nissan's Decherd Powertrain Plant. The 2016 Maxima certainly looks different than other mainstream sedans with its prominent V-shaped grille, slashing headlights and floating roof. Prices start at $32,410, plus $825 for destination. For that, customers get a 300-horsepower V6 that's connected to what Nissan claims is a "performance-oriented" CVT. The latest model is also estimated to get 30 miles per gallon on the highway. NISSAN BEGINS PRODUCTION OF EIGHTH-GENERATION MAXIMA "4-DOOR SPORTS CAR" IN TENNESSEE NASHVILLE, Tenn. – Nissan's Smyrna Vehicle Assembly Plant continues its reign as the top-producing automotive plant in North America, as Gov. Bill Haslam, U.S. Senator Lamar Alexander and Tennessee Economic and Community Development Commissioner Randy Boyd joined plant employees to celebrate the start of production for the all-new 2016 Nissan Maxima. "When Nissan came to Tennessee more than 30 years ago, there were almost no auto jobs in the state," said Alexander. "Three decades later, about one-third of our manufacturing jobs are auto related, auto suppliers have located in 80 counties, and our family incomes are higher. I want to thank Nissan for providing opportunities for thousands of talented Tennesseans." The first U.S.-assembled Maxima rolled off the assembly line in Smyrna in January 2003. Since then, Nissan has produced nearly 800,000 Maxima sedans at the plant, with more than 60,000 shipped to markets worldwide. Maxima is one of six models currently built at the Smyrna plant and is assembled on the same line as the Altima midsize sedan and all-electric Nissan LEAF. Maxima's new 3.5-liter, VQ-series V6 engine is also assembled in Tennessee at Nissan's Decherd Powertrain Plant.








