2003 Nissan Altima Base Sedan 4-door 2.5l on 2040-cars

Auto blog

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

2013 Nissan NV200 hauls itself into McCormick Place

Nissan has already announced that its NV200 will be New York City's Taxi of Tomorrow, but now small businesses can also take advantage of the compact commercial van when it goes on sale this April. Unveiled at the Chicago Auto Show, the Nissan NV200 bound for North America has been stretched by almost eight inches compared to the same van that has been on sale in other global markets since 2009. The 2013 Nissan NV200 will be built in Cuernavaca, Mexico and sold at select Nissan dealerships with a starting price of $19,990 (*excluding the $845 destination charge).
At that price, the NV200 costs thousands less than lead competitors like the Ford Transit Connect and the Ram C/V Tradesman, although it does deliver less cargo volume than both as well. Despite its longer body, the NV200's 122.7 cubic feet of volume comes in just under the 129.6 cu-ft for the Ford and well under the Ram's 155.5 cu-ft cargo capacity. The split rear doors and dual side sliding side doors will give plenty of access to the NV200's cargo area, however, and Nissan says the van is wide enough to accommodate a standard pallet.
The NV200 was designed as much to be a mobile office as it is a hauler, so Nissan made the cabin as such. The passenger seat back can fold down creating a flat space for a laptop, and the center console has been specifically designed for hanging file folders. The base NV200S includes power windows, a two-speaker AM/FM/CD audio system and a 12-volt power outlet, while the NV200 SV (starting at $20,980) adds features such as cruise control, six floor-mounted cargo tie downs, power mirrors and door locks and remote keyless entry. Options include the $950 Technology Package (available on SV only and adds navigation, backup camera and satellite radio), $250 for Bluetooth and $190 for glass added to the rear cargo doors.

Renault-Nissan debuts new Common Module Family for future vehicles

Platform sharing is nothing new for the 14-year-old Renault-Nissan Alliance, but this partnership is set to introduce new modular platform components that will eventually underpin 11 Renault models and three Nissan vehicles by 2020. Rather than being a typical platform, the Common Module Family (CMF) actually represents five segments of a platform that can be used in various applications, and one of the first vehicles to use this architecture will be the 2014 Nissan Rogue (spy shots of which are shown below) when it arrives "in late 2013."
As pictured in the image above (click to expand), CMF is composed of four chassis component, principally the front underbody, rear underbody, engine bay and cockpit as well as a common electrical system. Besides the next-gen Rogue, future Nissan models to share CMF will include the Qashqai and X-Trail, while Renault models will start using the platform next year on vehicles including the Scénic and Laguna. The CMF architecture is expected to help the Alliance reduce the parts cost of a vehicle by up to 30 percent and reduce the entry cost by up to 40 percent. The official press release with more details about CMF, and what it means for Renault-Nissan, is posted below.